Spec. No. : C515M3 Issued Date : 2003.04.02 Revised Date : 2006.12.26 . Page No. : 1/5 CYStech Electronics Corp. Low Current Positive Voltage Regulator SOT-89 LM78L05AM3 Description O G I The LM78L05AM3 series of surface mount regulators are easy-touse devices suitable for multitude of applications that require a regulated supply of up to 100mA. These regulators feature internal current limiting and thermal shutdown, making them remarkably rugged. No external components are required with the LM78L05AM3 devices in many applications. These devices offer a substantial performance advantage over the traditional zener diode resistor combination, as output impedance and quiescent current are substantially reduced. Features: • Wide Range Of Available, Fixed Output Voltages • Internal Short-Circuit Current Limiting • Internal Thermal Overload Protection • No External Components Required • Pb-free package Absolute Maximum Ratings (Ta=25°C) • Input Voltage....................................................................................................................................................... 30 V • Total Power Dissipation.................................................................................................................. Internally limited • Operating Temperature Range .......................................................................................................... 0 °C to +125 °C • Maximum Junction Temperature ..................................................................................................................... 125 °C • Storage Temperature Range ........................................................................................................... -55 °C to +150 °C • Lead Temperature (Soldering 10S) .................................................................................................................. 260 °C Schematic Diagram Typical Application Vin LM78L05 3 Vout Vin 1 5K 5.7K 100 2 100 C1 C2 Vout 13K 3.89K Note : C1 and C2 are required if regulator is located far from power supply filter and load, or oscillation may induced on the loop. LM78L05AM3 1.9K 5pF 3.41K A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the input ripple voltage. 1.5K 576 2.23K 7.8K 2.84K GND CYStek Product Specification CYStech Electronics Corp. Spec. No. : C515M3 Issued Date : 2003.04.02 Revised Date : 2006.12.26 . Page No. : 2/5 Electrical Characteristics Vin=10V, Io=40mA, Tj=25°C Cin=0.33uF, Cout=0.1uF (unless otherwise noted) Symbol Parameter Vo Output Voltage ΔVo Line Regulation ΔVo Load Regulation IQ Quiescent Current Quiescent Current ΔIQ Change Vn Output Noise Voltage Ripple Rejection ΔVin / ΔVout Ipk Peak Output Current VD Dropout Voltage Conditions Tj=25°C 7V≤Vin≤25V, 1mA≤Io≤40mA 1mA≤Io≤70mA 7V≤Vin≤20V 8V≤Vin≤20V 1mA≤Io≤100mA 1mA≤Io≤40mA Ta=25°C 8V≤Vin≤20V 1mA≤Io≤40mA 10Hz≤f≤100KHz 8V≤Vin≤16V, f=120Hz Ta=25°C Ta=25°C LM78L05A Min Typ Max 4.85 5 5.15 4.75 5 5.25 4.75 5 5.25 150 100 60 30 5 1 0.1 40 47 62 140 1.7 - Units V mV mV mA mA uV dB mA V Ordering Information Device LM78L05AM3 LM78L05AM3 Package SOT-89 (Pb-free) Shipping Marking 1000 pcs / Tape & Reel 78L05 CYStek Product Specification Spec. No. : C515M3 Issued Date : 2003.04.02 Revised Date : 2006.12.26 . Page No. : 3/5 CYStech Electronics Corp. Characteristic Curves Dropout Characteristics Maximum Average Power Dissipation 10000 5 4 Power Dissipation (mW) Output Voltage(V) 6 Io=1mA 3 Io=40mA 2 1000 Io=100mA 100 1 0 1 2 3 4 5 6 7 8 25 9 10 50 75 100 125 150 Ambient Temperature (°C) Input Voltage(V) Quiescent Current Quiescent Current 4 3.4 3 Quiescent Current(mA) Quiescent Current(mA) 3.5 2.5 2 1.5 1 3.2 3 2.8 0.5 2.6 0 0 LM78L05AM3 5 10 15 20 25 Input Voltage(V) 30 35 0 50 100 Ambient Temperature(°C) 150 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C515M3 Issued Date : 2003.04.02 Revised Date : 2006.12.26 . Page No. : 4/5 Reel Dimension Carrier Tape Dimension LM78L05AM3 CYStek Product Specification Spec. No. : C515M3 Issued Date : 2003.04.02 Revised Date : 2006.12.26 . Page No. : 5/5 CYStech Electronics Corp. SOT-89 Dimension Marking: A 2 1 3 78L05 78L05 H C D B E Style: Pin 1. Vout 2. GND 3. Vin I F G 3-Lead SOT-89 Plastic Surface Mounted Package CYStek Package Code: M3 *: Typical Inches Min. Max. 0.1732 0.1811 0.1594 0.1673 0.0591 0.0663 0.0945 0.1024 0.01417 0.0201 DIM A B C D E Millimeters Min. Max. 4.40 4.60 4.05 4.25 1.50 1.70 2.40 2.60 0.36 0.51 DIM F G H I Inches Min. Max. 0.0583 0.0598 0.1165 0.1197 0.0551 0.0630 0.0138 0.0161 Millimeters Min. Max. 1.48 1.527 2.96 3.04 1.40 1.60 0.35 0.41 Notes: 1.Controlling dimension: millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material: • Lead: 42 Alloy ; solder plating • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. • CYStek reserves the right to make changes to its products without notice. • CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. LM78L05AM3 CYStek Product Specification