OPLINK MWDMG1514001155 Micro-optic wdm Datasheet

Green 1480/1550 nm Micro-Optic WDM
MWDMG1514 Series
Product Description
Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on thinfilm filter technology and patented athermal platform for optical device. This device has very flat and wide passband, low insertion loss, and high isolation which
makes it ideal for combining pump (1480nm) and signal light (1550nm) in Optical Fiber Amplification Systems. The MWDM is used in high-power applications
in DWDM systems. Oplink MWDM devices are Bellcore GR-1221 qualification
tested and complied with industry green initiatives such as Rohs and WEEE. All
Oplink products are epoxy-free in the optical path. path.
Performance Specificationns
MWDMG1514 Series
Min
Pass Channel Wavelength Range λ1
Reflection Channel Wavelength
Range λ2
Typical
Max
Unit
Type 1514
1528
1610
nm
Type 1415
1440
1493
nm
 Environmental Green Plan
Compliance
Type 1514
1440
1493
nm
 Wide Operating Wavelength Range
Type 1415
1528
1610
nm
 Low Insertion Loss
0.7
0.5
dB
 High Channel Isolation
dB
 Highly Stable & Reliable
dB
 Epoxy-free Optical Path
Insertion Loss *
Pass Channel @ λ1
Reflect Channel @ λ2
Isolation
Reflect Channel @ λ1
Pass Channel @ λ2
14
30
Passband Ripple
0.15
Directivity
50
Return Loss
50
dB
0.1
dB
Polarization Mode Dispersion
0.05
ps
Maximum Power Handling
500
mW
Fiber Type
Corning SMF-28
Operating Temperature
Storage Temperature
250 μm Bare Fiber
900 μm Loose Tube
 Ultra Flat Wide Passband
dB
Polarization Dependent Loss
Package Dimensions **
Features
0 to +70
°C
-40 to +85
°C
P1: (ø) 5.5 x (L) 34.0
P2: (ø) 5.5 x (L) 40.0
mm
Applications
 Fiberoptic Amplifiers
 WDM Monitoring
Note:
* Values are referenced without connector loss.
** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified.
*** The maximum IL is under all states of polarization and within the full operating temperature and
wavelength ranges specified
R03.20081118
Green 1480/1550 nm Micro-Optic WDM
MWDMG1514 Series
Mechanical Drawing / Package Dimensions (dimension in mm)
P1: 250 µm bare fiber
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
P2: 900 µm loose tube
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
MWDMG
0
Wavelength
1480 nm pass = 1415
1550 nm pass = 1514
0
Fiber Length*
0.5 meter = H
1.0 meter = 1
1.5 meters = 5
2.0 meters = 2
Package & Fiber Jacket
P1 + 250 μm bare fiber = 11
P2 + 900 μm loose tube = 22
Connector Type
None = 1
FC/PC = 2
FC/SPC = 3
FC/APC = 4
SC/PC = 5
SC/SPC = 6
SC/APC = 7
ST = 8
LC = 9
MU = A
* The tolerance of fiber length is +/-0.1m. 1 meter is standard.
The lead-time for special fiber length will be longer.
R03.20081118
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules
Similar pages