SHEET 1 OF 1 7.1 [.28 in] 5.3 [.21 in] 10.70 [.421 in] R6.00 [.236 in] SHOWN WITH PROVIDED HEX NUT RECOMMENDED PANEL CUTOUT 4.0 [.16 in] POS.1 26.5 [1.04 in] 21.5 [.85 in] 90.0 1 11.60 [.457 in] POS.2 3 4 2 15.00 [.59 in] M12 X 1.0 THREAD 10.15 FLATS [.400 in] NOTE: 1. DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X = 0.4 X.XX = 0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT RATINGS: 1A @ 125VAC, 0.5A @250VAC 5. CONTACT RESISTANCE: 10m MAX. 6. INSULATION RESISTANCE: 200M MIN. 7. DIELECTRIC STRENGTH: 1,000VAC FOR 1 MINUTE 8. DENOTES CRITICAL PARAMETER 9. MATERIALS: HOUSING: ZINC ALLOY CAST CYLINDER: ZINC ALLOY W/ CHROME PLATING TERMINAL AND CONTACTS: SILVER PLATED KEY: TUBULAR - ZINC ALLOY WITH CHROME PLATING 10. PANEL THICKNESS: 10MM MAX. 11. KEYCODE: 801 (QTY. 2) A 22214 REV PCR NO NEW RELEASE DESCRIPTION 10.45 FLATS [.411 in] LEGEND = KEY PULL POSSIBLE IN THESE POSITIONS POS. 1 = DETENT POSITIONS POS. 2 SWITCH FUNCTION CONNECTED TERMINAL # POS.1 POS.2 ON ON 1-2 3-4 CIRCUIT: SPDT (90 INDEXING) CONTACT CONFIGURATION 3/22/16 MJR DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE KO103C-801 SCALE DATE 2:1 DR 3/22/2016 REV DWG MJR K100411 A