MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Overvoltage-proof design, 105C @No sparks against DC over-voltage @Endurance with ripple current : 105C 2000 hours @Non solvent-proof type @Pb-free design ?SPECIFICATIONS Items Characteristics Category Temperature Range -25 to +105C Rated Voltage Range Capacitance Tolerance Leakage Current 200 & 400Vdc P20% (M) I=0.04CV+100 Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) 200V 400V Rated voltage (Vdc) 0.20 0.24 tanE (Max.) 200V 400V Rated voltage (Vdc) 4 6 Z(-25C)/Z(+20C) Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) (at 20C, 120Hz) (at 20C after 1 minute) (at 20C, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated ripple current is applied for 2000 hours at 105C. Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C without voltage applied. Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [500% of the initial specified value Endurance Shelf Life ?DIMENSIONS [mm] F0.8 7.5P0.5 @Terminal Code : E FD+0.5max. Sleeve (PET) L+1.5max. 15min. 4min. Gas escape end seal Vent ?PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KLG AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47MF:470,100MF:101) Lead forming·taping code Terminal code Voltage code (ex. 200V:201,400V:401) Series code Category Please refer to "A guide to global code (radial lead type)" (1/2) CAT. No. E1001E MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Overvoltage-proof design, 105C ?STANDARD RATINGS WV (Vdc) Cap (mF) Case size fDbL(mm) tane Rated ripple current (mArms/ 105c,120Hz) Part No. 200 82 100 100 120 120 130 150 150 150 180 180 220 220 270 330 16 B 20 16 B 25 18 B 20 16 B 31.5 18 B 25 18 B 20 16 B 31.5 18 B 20 18 B 25 16 B 40 18 B 31.5 18 B 35.5 18 B 40 18 B 45 18 B 45 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 230 425 250 500 475 285 560 315 530 645 630 725 735 830 920 EKLG201ESS820ML20S EKLG201ESS101ML25S EKLG201ESS101MM20S EKLG201ESS121MLN3S EKLG201ESS121MM25S EKLG201ESS131MM20S EKLG201ESS151MLN3S EKLG201ESS151MM20S EKLG201ESS151MM25S EKLG201ESS181ML40S EKLG201ESS181MMN3S EKLG201ESS221MMP1S EKLG201ESS221MM40S EKLG201ESS271MM45S EKLG201ESS331MM45S WV (Vdc) Cap (mF) Case size fDbL(mm) tane Rated ripple current (mArms/ 105c,120Hz) Part No. 400 22 22 33 33 39 39 47 47 56 56 68 82 100 16 B 20 16 B 25 16 B 25 18 B 20 16 B 31.5 18 B 25 16 B 31.5 18 B 25 16 B 40 18 B 31.5 18 B 35.5 18 B 40 18 B 40 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 145 200 220 225 245 250 275 280 350 315 350 395 450 EKLG401ESS220ML20S EKLG401ESS220ML25S EKLG401ESS330ML25S EKLG401ESS330MM20S EKLG401ESS390MLN3S EKLG401ESS390MM25S EKLG401ESS470MLN3S EKLG401ESS470MM25S EKLG401ESS560ML40S EKLG401ESS560MMN3S EKLG401ESS680MMP1S EKLG401ESS820MM40S EKLG401ESS101MM40S SS : Lead forming / Taping code ?DC OVERVOLTAGE TEST CONDITIONS The vent will be operated and the capacitor shall become an open circuit without burning materials when the following excess DC voltage is applied. @Test DC voltage @Test circuit Rated voltage Current limit Test DC voltage 200Vdc 4A 300/375Vdc 400Vdc 2A 500/600Vdc + AC input SW CX - Constant DC voltage/current power supply ?RATED RIPPLE CURRENT MULTIPLIERS @Frequency Multipliers Frequency (Hz) 50 22 to 47mF 0.75 56 to 220mF 0.80 120 1.00 1.00 300 1.25 1.15 1k 1.50 1.30 10k 1.75 1.40 50k 1.80 1.50 100k 1.85 1.60 (2/2) CAT. No. E1001E