Online data sheet OD85-20T1 OD Max DISPLACEMENT MEASUREMENT SENSORS OD85-20T1 | OD Max DISPLACEMENT MEASUREMENT SENSORS A B C D E F H I J K L M N O P Q R S T Ordering information Type Part no. OD85-20T1 6028958 Other models and accessories www.sick.com/OD_Max Detailed technical data Features System part Sensor head Performance Measuring range 65 mm ... 105 mm, 6 % ... 90 % remission Resolution 5 µm 1) Repeatability 15 µm 1) Linearity ± 40 µm 1) Response time 0.5 ms 2) Measuring frequency 10 kHz Light source Laser, red Laser class 2 (EN 60825-1) 3) Typ. light spot size (distance) 70 µm x 290 µm (85 mm) Note Requires AOD-x 1) 2) 3) Measurement on 90 % remission (ceramic, white), for OD25-x measurement on mirror; averaging set to: 256; constant ambient conditions. Automatic sensitivity adjustment ≤ 2 ms. Wavelength: 650 nm, max. output: 1 mW. Mechanics/electronics Warm-up time ≤ 5 min Housing material Aluminum housing with glass lens Connection type 0.5 m cable with connector 1) 2) Indication LEDs, 1.4'' color display on evaluation unit Weight 250 g 3) 1) 2) 3) Can be extended to up to 10 m with extension cable. Sensor must be connected to controller unit. Includes 0.5 m cable. Ambient data Enclosure rating IP 67 Protection class III Ambient temperature Operation: –10 °C ... +45 °C Storage: –20 °C ... +60 °C Relative air humidity (non-condensing) 35 % ... 85 % 2 DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11 Subject to change without notice OD85-20T1 | OD Max DISPLACEMENT MEASUREMENT SENSORS Temperature drift ± 0.01 % FS/K (FS = Full Scale = Measuring range of sensor) Typ. Ambient light immunity Artificial light: ≤ 3,000 lx Sunlight: ≤ 10,000 lx Vibration resistance 10 Hz ... 55 Hz (amplitude 1.5 mm, x-, y-, z-axis 2 hours each) Shock resistance 50 G (x, y, z axis 3 times each) General notes Note on use OD Max sensor head OD25-x is only to be used with AODG-P/N1; All other types (OD350-x, OD85-x, OD30-x) are to be used with AOD-P/N1 Dimensional drawing (Dimensions in mm (inch)) OD30-05T1 OD85-20T1 76.5 (3.01) 25.6 1.5 (0.06) (1.01) 4.2 (0.17) 78 (3.07) 4.2 (0.17) 2 42.3 (1.67) 75 (2.95) 3 19.1 5 (0.75) 1 M4 (0.20) ① Cable Ø 5 mm, 0.5 m with connector, 10-pin ② Optical axis receiver ③ Optical axis sender Connection type Sensor head hirose connector 10-pin 2016-03-17 13:18:11 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 3 OD85-20T1 | OD Max DISPLACEMENT MEASUREMENT SENSORS A B C D E F Connection diagram 7 9 10 8 6 5 4 3 2 1 AOD AOD AOD AOD AOD AOD AOD AOD AOD AOD Adjustment possible ODxx-xxxx DisplacementSensor DISTANCE 4 LASER ON 5 ④ Distance indicator ⑤ Status indicator laser (laser on) Light spot size OD85-20T1 70 x 290 µm 120 x 500 µm 120 x 500 µm Sensor H I J K L M N O P Q R S T 65 85 105 (2.56) (3.35) (4.13) Distance All dimensions in mm (inch) 4 DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11 Subject to change without notice OD85-20T1 | OD Max DISPLACEMENT MEASUREMENT SENSORS Linearity OD85-20T1 Linearity [% FS] 0.6 0.5 0.4 0.3 0.2 2 4 3 0.1 0 1 –0.1 –0.2 –0.3 –0.4 –0.5 –0.6 65 70 75 80 85 90 95 100 105 (2.56) (2.76) (2.95) (3.15) (3.35) (3.54) (3.74) (3.94) (4.13) Distance in mm (inch) ① ② ③ ④ White ceramic Gray ceramic Aluminum Black rubber Recommended accessories Other models and accessories www.sick.com/OD_Max Brief description Type Part no. TERM.-AOD/AODG 6033129 Head A: female connector, M12, 10-pin, straight Head B: male connector, M12, 10-pin, straight Cable: unshielded, 2 m DSL-1210-G02M 6028943 Head A: female connector, M12, 10-pin, straight Head B: male connector, M12, 10-pin, straight Cable: unshielded, 5 m DSL-1210-G05M 6028944 Head A: female connector, M12, 10-pin, straight Head B: male connector, M12, 10-pin, straight Cable: unshielded, 10 m DSL-1210-G10M 6033614 Adapters and distributors Plug connectors and cables 2016-03-17 13:18:11 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 5 Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com