MPZ5024 THRU MPZ5040 50A, 20-24V, 28-32V, 38-42V AVALANCHE PRESS-FIT MOTOROLA DIODES MP CASE FEATURES .High current capability .Low forward voltage drop .Low leakage current .High surge current capability MECHANICAL DATA Case: Copper NP Terminals: Plated terminals, solderable per MIL-STD-202, method 208. .Weight: 6.8grams Dimension in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ Ambient temp. Unless otherwise specified.Single phase, half sine wave, 60HZ,resistive or inductive load. For capacitive load, derate current by 20% SYMBO L MPZ5024 MPZ5028 MPZ5040 UNITS VRRM 16 20 34 Volts VRWM 16 20 34 Volts VDC 16 20 34 Volts Breakdown voltage Min@ IBR=100mA/TA=25 ℃ VBRL 20 24 38 Volts Breakdown voltage Max@ IBR=100mA/TA=25 ℃ TL=125℃ Maximum Average Forward Rectified Current VBRH 24 32 42 Volts I(AV) 50 Amps Peak Forward Surge Current 8.3ms Single Sine-wave on Rated Load (JEDEC Method) IFSM 500 Amps Maximum Instantaneous Forward Voltage Drop at 35A DC TA=25℃ Maximum DC Reverse Current at Rated DC Blocking Voltage IF=10mA Forward Voltage Temperature Coefficient VF Maximum Current Peak Reverse Voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Operating AND Storage Temperature Range 1.0 Volts IR 0.2 uA VFTS 2 mV/℃ TSTG/ TJ -55 to +150 ℃ NOTE: 1.Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. www.shunyegroup.com.cn [email protected] RATING ANDCHARACTERISTIC CURVES MPZ5024 THRU MPZ5040 FIG. 1 –MAXIMUM AVERAGE FORWARD CURRENT DERATING FIG. 2 –MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG. 3 – PULSE WAVEFORM FIG.4 – TYPICA FORWARD CHARACTERISTICS FIG.5–PULSE RATING CURVE www.shunyegroup.com.cn [email protected]