Spec Sheet HIGH FREQUENCY PRODUCTS SAW Filter FAR-F6KY-2G1400-B4UY Features Item Summary W-CDMA / LTE / CDMA , Rx, 504 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping Embossed 3000 , 15000pcs Products characteristics table External Dimensions -30 to +85℃ L 1.4mm +0.1:-0.1 Band(3GPP) B1 / B4 W 1mm +0.1:-0.1 Band(3GPP2) BC6 T 0.5mm max Use WCDMA / CDMA / LTE Transmitting / Receiving Rx Filter Insertion Loss 1.8dB Attenuation 64dB RoHS Compliance Yes Halogen Free Yes Soldering Method Reflow Temperature Range 2015.06.03 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System W-CDMA I (2G) Rx Date Part Number FAR-F6KY-2G1400-B4UY Version 2.2b April 2, 2012 Final Table 1 Electrical Specification Specification Condition Parameter Ver. 2.2b (MHz) Unit Min. Typ. Max. Insertion Loss 2110 - 2170 - 1.8 2.2(*) dB Amplitude ripple 2110 - 2170 - 0.6 1.5 dB Input VSWR 2110 - 2170 - 1.8 2.0 - Output VSWR 2110 - 2170 - 1.8 2.0 - 10 - 1920 40 50 - dB 810 - 830 50 61 - dB 898 - 925 50 61 - dB 824 - 849 50 61 - dB 1920 - 1980 50 64 - dB 2200 - 2500 20 30 - dB 2500 - 6000 35 40 - dB Amplitude balance (|S21/S31|) 2110 - 2170 -1 1 dB Phase balance ((S21-S31)+180) 2110 - 2170 -10 -7~+5 10 deg. - - 15 dBm Attenuation Input Power -0.7~ +0.5 Operating temperature range -30 ~ +85 Input Impedance (Unbalanced) 50 ohm 100 ohm Output Impedance (Balanced / differential) Device size 1.4typ. x 1.0typ. x 0.5max. o Remarks C mm (*) Specification of insertion loss includes loss that comes from the test board. Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System W-CDMA I (2G) Rx Date Part Number FAR-F6KY-2G1400-B4UY Version 2.2b April 2, 2012 Final Dimensions Device size: 1.4mmtyp. x 1.0mmtyp. x 0.5mmmax. index Unit : mm Pin No. Symbol Function 1 2 3 4 5 IN GND OUT OUT GND Unbalanced pin Ground Balanced pin Balanced pin Ground Evaluation Circuit 3 Balanced 1 Output (100ohms) Unbalanced Input (50ohms) 2,5 4 1 ~ 5 : Pin No. GND Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System W-CDMA I (2G) Rx Date Part Number FAR-F6KY-2G1400-B4UY Version 2.2b Fig.1 Pass-band Characteristic Fig.2 In-band Characteristic April 2, 2012 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System W-CDMA I (2G) Rx Date Part Number FAR-F6KY-2G1400-B4UY Version 2.2b Fig.3 VSWR (INPUT) Fig.4 VSWR (OUTPUT) April 2, 2012 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System W-CDMA I (2G) Rx Date Part Number FAR-F6KY-2G1400-B4UY Version 2.2b Fig.5 Wide-band Characteristic April 2, 2012 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System W-CDMA I (2G) Rx Date Part Number FAR-F6KY-2G1400-B4UY Version 2.2b Fig.6 Impedance (S11) Fig.7 Impedance (S22) April 2, 2012 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System W-CDMA I (2G) Rx Date Part Number FAR-F6KY-2G1400-B4UY Version 2.2b Fig.8 Amplitude balance Fig.9 Phase balance April 2, 2012 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System W-CDMA I (2G) Rx Date Part Number FAR-F6KY-2G1400-B4UY Version 2.2b April 2, 2012 Final Notice All of the contents specified herein are subject to change without notice due to technical improvements, etc. Please contact TAIYO YUDEN Co., Ltd. for further details of product specifications. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. This product is for general electronics equipment such as Audio-Visual equipment, household electronics, office supplies, information services and telecommunications; therefore, in case this product is used for any medical equipment, space equipment, nuclear equipment or disaster prevention equipment, please contact TAIYO YUDEN in advance. In case this product is used for general electronics equipment or circuits which require high safety and high reliability, thoroughly evaluate on safety and add a protection circuit if necessary.