AD4C113 1 Form A/1 Form B Solid State Relay DESCRIPTION The AD4C113 is composed of two isolated relays; one normally open and one normally closed. Each relay has a bi-directional, singlepole, single-throw contact. Completely independent of its counterpart, each consists of an LED driver that activates an integrated circuit, which in turn drives a pair of DMOS transistors. These transistors are protected with free-wheeling diodes that can handle up to 1.5A of inrush current, making the relay ideal for switching lamps and highly inductive loads. FEATURES APPLICATIONS • 1 Form A / 1 Form B integrated in 1 package • Reed relay replacement • Low input control power consumption (2.5mA TYP) • Meter reading systems • 120mA maximum continuous load current • Medical equipment • 35 ohms maximum on-resistance (Form A) • Battery monitoring • 35 ohms maximum on-resistance (Form B) • Multiplexers • High Input - Output Isolation • Long life/high reliability OPTIONS/SUFFIXES* • -S Surface Mount Option • -TR Tape and Reel Option NOTE: Suffixes listed above are not included in marking on device for part number identification. SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS* PARAMETER UNIT MIN Storage Temperature °C -55 125 Operating Temperature °C -40 85 Continuous Input Current mA 40 Transient Input Current mA 400 Reverse Input Control Voltage V Output Power Dissipation TYP MAX 6 mW 800 *The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to Absolute Ratings may cause permanent damage to the device and may adversely affect reliability. APPROVALS • © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 • BABT CERTIFICATE #607836: BS EN 60950, BS EN 41003, BS EN 60065 CSA CERTIFICATE #LR111581-1 • UL FILE #E90096 Page 1 of 6 AD4C113 rev 1.40 (10/25/2004) AD4C113 1 Form A/1 Form B Solid State Relay ELECTRICAL CHARACTERISTICS - 25°C PARAMETER UNIT MIN TYP MAX 1.2 1.5 TEST CONDITIONS INPUT SPECIFICATIONS LED Forward Voltage V LED Reverse Voltage 6 12 V Turn-On Current (Form A) mA 2.5 Turn-On Current (Form B) mA 0.5 Turn-Off Current (Form A) mA 0.5 Turn-Off Current (Form B) mA 5 If = 10mA Ir = 10uA 5 Io = 120mA Io = 120mA 2.5 OUTPUT SPECS (NORMALLY OPEN) Blocking Voltage V 400 Continuous Load Current mA On-Resistance Ω 25 Leakage Current Io = 1uA 120 If = 5mA 35 µA 0.2 1 Vo = 400V Output Capacitance pF 25 35 Vo = 25V, f = 1.0MHz Offset Voltage mV 0.2 If = 5mA Turn-On Time ms 1 5 If = 5mA, Io = 120mA Turn-Off Time ms 1 5 If = 5mA, Io = 120mA OUTPUT SPECS (NORMALLY CLOSED) Blocking Voltage Continuous Load Current 400 V Io = 1uA, If = 5mA mA On-Resistance Ω 25 Leakage Current µA 0.2 Output Capacitance pF 15 120 If = 0mA 35 Io = 120mA 1 Vo = 400V, If = 5mA 20 Vo = 25V, f = 1.0MHz Offset Voltage 0.2 mV Turn-On Time ms 1 5 If = 0mA, Io = 120mA Turn-Off Time ms 1 5 If = 0mA, Io = 120mA COUPLED SPECIFICATIONS Isolation Voltage V 2500 T = 1 minute V 3750 T = 1 minute Isolation Resistance GΩ 100 Coupled Capacitance pF Contact Transient Ratio V/ -H Suffix © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 2 µs 2000 Page 2 of 6 7000 dV = 50V AD4C113 rev 1.40 (10/25/2004) AD4C113 1 Form A/1 Form B Solid State Relay PERFORMANCE DATA AD4C113 - Normally Open AD4C113 - Normally Open Typical Turn-On Time Distribution N = 100, Ambient Temperature = 25°C Typical Turn-Off Time Distribution N = 100, Ambient Temperature = 25°C 50 Device Count 30 20 10 0 40 30 20 10 0 0 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.04 0.08 0.12 0.16 0.2 0.24 0.28 Turn-Off Tim e (m s) Turn-On Tim e (m s) AD4C113 - Normally Open AD4C113 - Normally Open Typical On-Resistance Distribution N = 100, Ambient Temperature = 25°C Typical Leakage Current Distribution N = 100, Ambient Temperature = 25°C 80 Device Count 40 30 20 10 0 15.5 16 16.5 17 17.5 18 18.5 60 40 20 0 19 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 On-Resistance (ohm s) AD4C113 - Normally Open Maximum Load Current vs. Temperature Blocking Voltage (V) © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 0 80 380 400 420 440 460 480 500 520 60 0 50 40 10 100 -2 0 30 20 150 -4 0 40 Load Current (mA) AD4C113 - Normally Open Typical Blocking Voltage Distribution N = 100, Ambient Temperature = 25°C 50 Device Count Leakage Current (uA) 20 Device Count 50 0 Device Count 40 Tem perature (C) Page 3 of 6 AD4C113 rev 1.40 (10/25/2004) AD4C113 1 Form A/1 Form B Solid State Relay AD4C113 - Normally Closed AD4C113 - Normally Closed Typical Turn-On Time Distribution N = 100, Ambient Temperature = 25°C Typical Turn-Off Time Distribution N = 100, Ambient Temperature = 25°C 50 Device Count 30 20 10 0 30 20 10 0 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 Turn-On Tim e (m s) Turn-Off Tim e (m s) AD4C113 - Normally Closed AD4C113 - Normally Closed Typical On-Resistance Distribution N = 100, Ambient Temperature = 25°C Typical Leakage Current Distribution N = 100, Ambient Temperature = 25°C 80 Device Count 50 0 22 23 24 25 26 27 28 40 20 0 29 0.1 0.12 0.14 0.16 0.18 0.2 0.22 0.24 On-Resistance (ohm s) Leakage Current (uA) AD4C113 - Normally Closed AD4C113 - Normally Closed Blocking Voltage (V) © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 100 50 0 -2 0 380 400 420 440 460 480 500 520 150 -4 0 60 50 40 30 20 10 0 Typical Load Current vs. Temperature Load Current (mA) Device Count Typical Blocking Voltage Distribution N = 100, Ambient Temperature = 25°C 80 10 60 60 30 20 40 40 20 Device Count 40 0 Device Count 40 Tem perature (C) Page 4 of 6 AD4C113 rev 1.40 (10/25/2004) AD4C113 1 Form A/1 Form B Solid State Relay MECHANICAL DIMENSIONS 8 PIN DUAL IN-LINE PACKAGE 8 PIN SURFACE MOUNT DEVICE END VIEW END VIEW TOP VIEW TOP VIEW BOTTOM VIEW/ BOARD PATTERN BOTTOM VIEW/ BOARD PATTERN © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 5 of 6 AD4C113 rev 1.40 (10/25/2004) AD4C113 1 Form A/1 Form B Solid State Relay DISCLAIMER Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notice. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other warranty, expressed or implied, including merchantability and fitness for particular use. LIFE SUPPORT POLICY SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness. © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 6 of 6 AD4C113 rev 1.40 (10/25/2004)