GS06U 5 ~ 6W AC-DC Single Output Wall-mounted type series Features : Universal AC input / Full range No load power consumption <0.3W ErP step2 compliant Meet EISA 2007 (Energy Independence and Security Act) 2 pole USA plug Class power (without earth pin) Protections: Short circuit / Overload / Over voltage Pass LPS Fully enclosed plastic case Approvals: UL / CUL / CB / FCC / CE 2 years warranty SPECIFICATION ORDER NO. SAFETY MODEL NO. GS06U-11P1J GS06U-2P1J GS06U-3P1J GS06U-4P1J GS06U-5P1J GS06U-6P1J GS06U-8P1J GPSU06U-1 GPSU06U-1-1 GPSU06U-2 GPSU06U-3 GPSU06U-4 GPSU06U-5 GPSU06U-6 GPSU06U-8 7.5V 9V 12V 15V 18V 24V 48V RATED CURRENT 1.00A 0.8A 0.66A 0.5A 0.4A 0.33A 0.25A 0.125A CURRENT RANGE 0 ~ 1.00A 0 ~ 0.8A 0 ~ 0.66A 0 ~ 0.5A 0 ~ 0.4A 0 ~ 0.33A 0 ~ 0.25A 0 ~ 0.125A RATED POWER 5W 6W 6W 6W 6W 6W 6W 6W 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 180mVp-p 200mVp-p 5 ~ 6V 6 ~ 8V 8 ~ 11V 11 ~ 13V 13 ~ 16V 16 ~ 21V 21 ~ 27V 33 ~ 48V Fixed VOLTAGE TOLERANCE Note.4 5.0% DC VOLTAGE OUTPUT GS06U-1P1J Note.2 5V RIPPLE & NOISE (max.) Note.3 50mVp-p VOLTAGE ADJ. RANGE 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% LINE REGULATION Note.5 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION Note.6 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% SETUP, RISE, HOLD UP TIME 1000ms, 50ms, 12ms at full load 90 ~ 264VAC 127 ~ 370VDC VOLTAGE RANGE 47 ~ 63Hz FREQUENCY RANGE INPUT EFFICIENCY (Typ.) Note.7 68% AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note. 8) EMC EMISSION EMC IMMUNITY MTBF OTHERS CONNECTOR NOTE 74% 75% 77% 78% 78% 82% 84% 0.2A / 100VAC 50A / 230VAC 0.25mA / 240VAC >105% rated output voltage power for 5V ; >110% rated output power for 7.5 ~ 48V Protection type : Hiccup mode, recovers automatically after fault condition is removed >120% rated output voltage Protection type : Clamp by zener diode 0 ~ +40 (Refer to "Derating Curve") 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA22.2 approved I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022, EN61000-3-2,3, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A DIMENSION PACKING PLUG 500Khrs min. MIL-HDBK-217F(25 ) 32*66*42.5mm (L*W*H) 100g ; 110pcs / 12Kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, turning fork type center positive for stock ; Other type available by customer requested CABLE Standard type 20Awg UL1185 6ft for stock ; Other type available by customer requested 1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load 7.Efficiency is measured at 115VAC. 8.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. File Name:GS06U-SPEC 2011-06-14 GS06U 5 ~ 6W AC-DC Single Output Wall-mounted type Mechanical Specification series Unit:mm 12.7 Plug Assignment NAME PLATE Standard plug: P1J 18.2 6.3 P1J 24.2 1.5 P/N OUTPUT CENTER + UL1185 20AWG 1830 50mm 17.1 0.5 48 1 42.5 1 ID 2.1 x OD 5.5 66 1 11 C"+" 32 1 Static Characteristics Derating Curve 100 LOAD (%) LOAD (%) 100 70 0 10 20 30 Ta ( 40 ) 50 80 60 0 50 60 70 80 90 100 260 INPUT VOLTAGE File Name:GS06U-SPEC 2011-06-14