GBJ50005 THRU GBJ5010 SINGLE PHASE 50.0 AMP GLASS PASSIVATED BRIDGE RECTIFIER Features GBJ · Glass passivated die construction · Low forward voltage drop · High current capability · High surge current capability .189(4.8) .173(4.4) 1.193(30.3) 1.169(29.7) · Plastic material-UL flammability 94V-0 .215(5.2) .196(4.8) .800(20.3) + Mechanical Data · Case: Molded plastic, GBJ · Terminals: Plated Leads Solderable per · · · · MIL-STD-202, Method 208 Polarity: As Marked on Case Mounting Position: Any Marking: Type Number Lead Free: For RoHS / Lead Free Version .150(3.8) .134(3.4) ~ .106(2.7) .096(2.3) ~ .787(19.7) .441(11.2) .425(10.8) - .706(18.0) .626(16.0) .165(4.2) .150(3.8) .090(2.3) .078(2.0) .043(1.1) .035(0.9) .433(11) .354(9.0) .110(2.8) .094(2.4) .184(3.4) .122(3.1) .023(0.6) .303(7.7) .287(7.3) .303(7.7) .287(7.3) dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER SYMBOL Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM RMS Reverse Voltage VRMS GBJ GBJ 50005 5001 GBJ GBJ 5002 5004 GBJ GBJ 5006 5008 GBJ 5010 UNITS 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V VDC Average Rectified Output Current (with heatsink ) (without heatsink) (Note 1)@TC =100℃ IO 50.0 3.5 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 450 A Forward Voltage per element VFM 1.1 V IR 5.0 500 uA CJ 75 pF Between junction and ambient, Without heatsink RθJA 22 Between junction and case, With heatsink RθJC 0.8 TJ,TSTG -55to+150 Peak Reverse Current At Rated DC Blocking Voltage @IF=25A @TA =25 ℃ @TA =125 ℃ Typical Junction Capacitance per leg Operating and Storage Temperature Range ℃/W ℃ NOTES: 1.Device mounted on 300mm*300mm*1.6mm cu plate heatsink. version:01 1of2 www.dyelec.com AVERAGE FORWARD RECTIFIED CURRENT (A) GBJ50005 THRU GBJ5010 60.0 with heatsink 45.0 30.0 Single Phase Half Wave 60Hz 15.0 without heatsink 0 150 100 50 200 I (AV), 0 IF, INSTANTANEOUS FORWARD CURRENT (A) Fig. 1 Output Current Derating Curve 400 350 300 250 200 150 TA = 25°C Single Half Sine-Wave Pulse Width = 8.3ms (JEDEC Method) 50 0 10 1 TA = 25 C ° Pulse Width = 300 µs 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Fig. 4 Typical Junction Capacitance INSTANTANEOUS REVERSE CURRENT, MICROAMPERES IFSM, PEAK FORWARD SURGE CURRENT (A) Fig. 3 Maximum Peak Forward Surge Current (per leg) 100 100 VF, INSTANTANEOUS FORWARD VOLTAGE (V) TC ,CASE TEMPERATURE( ° C) 450 Fig. 2 Typical Forward Characteristics (per leg) 10 1.0 T A=25°C 0.1 0.01 10 1 100 NUMBER OF CYCLES AT 60 Hz 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE FIG.5 TYPICAL REVERSE CHRACTERISTICS INVSTANTANEOUS REVERSE CURRENT (µA) 100 Tj=150℃ 10 1.0 Tj=25℃ 0.1 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK INVERSE VOLTGE (V) version:01 2of2 www.dyelec.com