PROTEC MMAD130 Ultra low capacitance multi-line steering diode array Datasheet

05136
MMAD Series
Only One Name Means ProTek’Tion™
ultra low capacitance multi-line steering diode array
Description
The MMAD Series are low distortion steering diodes. These devices are intended for use in high frequency analog
or digital data I/O ports for protection against Electrostatic Discharge (ESD) and Electrical Fast Transients (EFT). The
MMAD Series is connected between rail-to-rail voltage bus or rail-to-ground for clamping and diverting overvoltage
transients for the protection of sensitive network interface circuits.
This series provides low capacitance, which insures signal integrity up to 900MHz, while complete isolation between
adjacent diodes keeps cross-talk to a minimum. The MMAD Series is available in a SO-14 package and meets the IEC
61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements.
SO-14 package
Features
applications
• Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
• Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns
• Compatible with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 1(LineGnd) & Level 2(Line-Line)
• 500 Milliwatt Continuous Power Dissipation
• Monolithic Design
• ESD Protection > 25 kilovolts
• Protects up to 7 to 10 I/O Lines
• Working Voltage > 50 Volts
• Low Leakage Current < 0.1µA
• Ultra Low Capacitance: 5pF per Diode
• RoHS Compliant
• REACH Compliant
•
•
•
•
High Frequency Data Lines
RS-232 & RS-422 Interface Networks
Ethernet 10/100 Base T
Computer I/O Ports
Mechanical characteristics
• Molded JEDEC SO-14 Package
• Approximate Weight: 0.15 grams
• Lead-Free Pure-Tin Plating (Annealed)
• Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• 16mm Tape and Reel Per EIA Standard 481
• Flammability Rating UL 94V-0
CIRCUIT DIAGRAM
+
I/O PORT
GND OR (-)
Does Not Apply to the MMAD1109
05136.R12 9/12
Page 1
www.protekdevices.com
05136
MMAD Series
Only One Name Means ProTek’Tion™
pin identification and configuration
MMAD1106
MMAD1103
1
14
2
2
3
5
8
7
9
11
14
MMAD1107
2
3
14
11 12
9
4
5
2
7
6
7
8
9
11
12
8 Diode Common Cathode Array
NC Pins 1, 4, 6, 10 & 13
8 Lines of Protection
05136.R12 9/12
12
7
8
11
10 13 14
9
12
MMAD1109
14
5
11
Dual 10 Diode Array
10 Lines of Protection
MMAD1105
3
9
MMAD130
1
10
Dual 8 Diode Array
NC Pins 6 & 13
8 Lines of Protection
2
8
7
16 Diode Array
NC Pins 4, 6, 10 & 13
8 Lines of Protection
3
8
5
4
5
12
8 Diode Common Anode Array
NC Pins 1, 4, 6, 10 & 13
8 Lines of Protection
1
3
7
6
5
4
8
9
10 11
3
2
1
12 13
14
7 Lines of Protection
Page 2
www.protekdevices.com
05136
MMAD Series
Only One Name Means ProTek’Tion™
typical device characteristics
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
Continuous Power Dissipation
SYMBOL
VALUE
UNITS
PPK
500
Milliwatts
Continuous Forward Current (Single Diode)
IP
400
mA
Repetitive Peak Forward Current @ tp = 5µs, F = 50kHz
IFRM
700
mA
Operating Temperature
TA
-55 to 150
°C
TSTG
-55 to 150
°C
Storage Temperature
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
REPETITIVE
PEAK
REVERSE
VOLTAGE
maximum
forward
peak pulse
current
maximum
forward
voltage
MAXIMUM
reverse
leakage
current
maximum
CAPACITANCE
(Per Diode)
@ 10µA
V RRM
VOLTS
@ 8/20µs
I FM
amps
@ 100mA
VF
volts
VRRm @ 40v
Ir
µA
@4V, 1MHz
Cj
pF
MMAD1103
50
12
1.2
0.1
5
MMAD1105
50
12
1.2
0.1
5
MMAD1106
50
12
1.2
0.1
5
MMAD1107
50
12
1.2
0.1
5
MMAD1109
50
12
1.2
0.1
5
MMAD130
50
12
1.2
0.1
5
figure 1
pulse wave form
IPP - Peak Pulse Current - % of IPP
120
100
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
Peak Value IPP
80
e-t
60
40
td = t/(IPP/2)
20
0
05136.R12 9/12
tf
0
5
10
15
t - Time - µs
Page 3
20
25
30
www.protekdevices.com
05136
MMAD Series
Only One Name Means ProTek’Tion™
SO-14 package information
outline dimensions
dim
millimeters
-A-
inches
min
max
min
max
A
8.55
8.75
0.337
0.344
B
3.80
4.00
0.150
0.157
C
1.35
1.75
0.054
0.068
D
0.35
0.49
0.014
0.019
F
0.40
1.25
0.016
0.049
G
1.27 BSC
0.25
0.007
0.009
K
0.10
0.25
0.004
0.008
P
5.80
6.20
0.229
0.244
0.50
0.010
0.019
NOTES
1.
2.
3.
4.
5.
6.
1
+ 0.010” (0.25mm) M B M
P
7 PL
7
D
G
0.18
0.25
8
-B-
0.05 BSC
J
R
14
C
R X 45°
0° - 10°
-T-
+ 0.010” (0.25mm) M T B S A S
J
K
F
14 PL
-T- = Seating plane and datum surface.
Dimensions “A” and “B” are datum.
Dimensions “A” and “B” do not include mold protrusion.
Maximum mold protrusion is 0.015” (0.380mm) per side.
Dimensioning and tolerances per ANSI Y14.5M, 1982.
Dimensions are exclusive of mold flash and metal burrs.
A
pad layout dimensions
dim
millimeters
B
inches
min
max
min
max
A
1.14
1.40
0.045
0.055
B
0.64
0.89
0.025
0.035
C
6.22
-
0.245
-
D
3.94
4.17
0.155
0.165
E
1.02
1.27
0.040
0.050
NOTES
C
D
E
1. Controlling dimension: inches.
05136.R12 9/12
Page 4
www.protekdevices.com
05136
MMAD Series
Only One Name Means ProTek’Tion™
TAPE AND REEL
P0
D
t
10 Pitches Cumulative
Tolerance on tape ± 0.2
P2
E
F
W
K0
B0
A0
P
User Direction of Feed
specifications
Reel Dia.
Tape
Width
178mm (7”)
16mm
A0
B0
K0
D
E
F
W
P0
P2
P
tmax
6.50 ± 0.10 9.5 ± 0.10 2.10 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 16.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10
0.25
Notes
1.
2.
3.
4.
5.
6.
Dimensions are in millimeters.
Surface mount product is taped and reeled in accordance with EIA-481.
Suffix - T7 = 7” Reel - 1,000 pieces per 16mm tape.
Suffix - T13 = 13” Reel - 2,500 pieces per 16mm tape.
Bulk product shipped in tubes of 55 pieces per tube.
Marking on Part - part number, date code, logo and pin one defined by dot on top of package.
Package outline per document number 06006.R3 10/09
ORDERING INFORMATION
base PART NUMBER
(xx = Voltage)
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE qty
MMADxxxx
-LF
-T7
1,000
7”
55
MMADxxxx
-LF
-T13
2,500
13”
55
This device is only available in a Lead-Free configuration.
05136.R12 9/12
Page 5
www.protekdevices.com
05136
MMAD Series
Only One Name Means ProTek’Tion™
company information
COMPANY PROFILE
In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products.
These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses
(NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog
switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: & Marketing: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By E-mail:
Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
ProTek Devices (Asia Pacific) Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05136.R12 9/12
Page 6
www.protekdevices.com
Similar pages