Rohm LM393WDT Signature series comparator Datasheet

General-purpose Operational Amplifiers / Comparators
SIGNATURE SERIES
Comparators
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
●Description
The Universal Standard LM393 / LM339 / LM2903 /
LM2901 family monolithic ICs integrate two / four
independent comparator circuits on a single chip and
feature high gain, low power consumption, and an
operating voltage range between 2[V] and 36[V]
(single power supply).
No.11094ECT04
SIGNATURE
SERIES
Dual
LM393 family
LM393DT
LM393PT
LM393ST
LM393WDT
LM393WPT
Quad
LM2903 family
LM2903DT
LM2903PT
LM339 family
LM2901 family
LM339DT
LM339PT
LM2901DT
LM2901PT
●Features
1) Operating temperature range
Commercial Grade
LM339/393 family
: 0[℃] to + 70[℃]
Extended Industrial Grade
LM2903/2901 family : -40[℃] to +125[℃]
2) Open collector output stage
3) Single / dual power supply compatible
4) Low supply current
0.4[mA] typ.(LM2903/393 family)
1.1[mA] typ.(LM2901/339 family)
5) Low input-bias current: 25[nA] typ.
6) Low input offset current: 5[nA] typ.
7) Common-mode input voltage range includes ground
8) Differential input voltage is possible to apply the absolute maximum ratings±36[V].
9) Low output saturation voltage
10) TTL, MOS, CMOS compatible output
●Pin Assignment
OUTPUT 1
1
INVERTING
INPUT 1
2
NON-INVERTING
INPUT 1
3
Vcc―
4
SO package8
LM393DT
LM393WDT
LM2903DT
8
- +
+ -
TSSOP8
LM393PT
LM393WPT
LM2903PT
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
OUTPUT 2
1
14 OUTPUT 3
OUTPUT 1
2
13 OUTPUT 4
Vcc―
7
OUTPUT 2
6
INVERTING
INPUT 2
5
NON-INVERTING
INPUT 2
Vcc
-
12 Vcc-
3
-
+
-
+
INVERTING 4
INPUT 1
11 NON-INVERTING
INPUT 4
NON-INVERTING 5
INPUT 1
10 INVERTING
INPUT 4
INVERTING
6
INPUT 2
-
NON-INVERTING
7
INPUT 2
Mini SO8
LM393ST
SO package14
LM339DT
LM2901DT
1/17
+
-
9
NON-INVERTING
INPUT 3
8
INVERTING
INPUT 3
+
TSSOP14
LM339PT
LM2901PT
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
●Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Supply Voltage
Ratings
LM393 family
LM339 family
LM2903 family LM2901 family
Unit
Vcc+-Vcc-
+36
V
Vid
±36
V
Differential Input Voltage
Common-mode Input Voltage Range
Vicm
Operating Temperature Range
Topr
Storage Temperature Range
Maximum Junction Temperature
-0.3 to +36
0 to +70
V
-40 to +125
℃
Tstg
-65 to +150
℃
Tjmax
+150
℃
●Electric Characteristics
○LM393/339 family(Unless otherwise specified, Vcc+=+5[V])
Limits
Parameter
Temperature
Symbol
range
LM393 family
Min.
Input Offset Voltage (*1)
VIO
Input Offset Current (*1)
IIO
Input Bias Current (*1)
IIB
Large Signal Voltage Gain
AVD
Supply Current
(All Comparators)
ICC
Input Common-mode
Voltage Range
VICM
Differential InputVoltage
VID
Low level Output Voltage
VOL
High level Output Current
IOH
Output Sink Current
Isink
Small Single Response Time
tRE
Typ.
LM339 family
Max.
Min.
Unit
Typ.
Max.
25℃
-
1
7
-
1
7
full range
-
-
9
-
-
9
25℃
-
5
50
-
5
50
full range
-
-
150
-
-
150
25℃
-
25
250
-
25
250
full range
-
-
400
-
-
400
25℃
25
200
-
25
200
-
25℃
-
0.4
1
-
1.1
2
full range
-
1
2.5
-
1.3
2.5
25℃
-
-
Vcc+-1.5
-
-
Vcc+-1.5
+
full range
-
-
Vcc -2.0
-
-
Vcc+-2.0
25℃
-
-
Vcc+
-
-
Vcc+
25℃
-
250
400
-
250
400
full range
-
-
700
-
-
700
Fig.
No.
mV
Vcc+=5 to 30[V],VO=1.4[V],
Vicm=0 to -1.5[V]
2
nA
VO=1.4[V]
2
nA
VO=1.4[V]
2
Vcc+=15[V],VO=1 to 11[V],
RL=15[kΩ]
2
V/mV
mA
Vcc+=5V,no load
Vcc+=30[V],no load
3
V
-
2
V
-
-
mV
VID=-1[V],Isink=4[mA]
3
25℃
-
0.1
-
-
0.1
-
nA
full range
-
-
1
-
-
1
μA
Vcc+=30[V],VID=1[V]
VO=30[V]
3
25℃
6
16
-
6
16
-
mA
VID=-1[V],VO=1.5[V]
3
-
1.3
-
-
1.3
-
μs
RL=5.1[kΩ], Vcc+=5[V]
VIN=100[mVp-p],
Overdrive=5[mV]
3
-
300
-
-
300
-
ns
RL=5.1[kΩ], Vcc+=5[V]
VIN=TTL input, Vref=1.4[V]
3
25℃
Large Single Response Time
Conditions
tREL
(*1) Absolute value
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
2/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
○LM2903/2901 family(Unless otherwise specified, Vcc+=+5[V])
Limits
Parameter
Symbol
Input Offset Voltage (*2)
VIO
Input Offset Current (*2)
IIO
Input Bias Current (*2)
IIB
Large Signal Voltage Gain
AVD
Supply Current
(All Comparators)
ICC
Input Common-mode
Voltage Range
VICM
Differential Input Voltage
VID
Low Level Output Voltage
VOL
High Level Output Current
Isink
Output Sink Current
Temperature
range
LM2903 family
LM2901 family
Unit
Min.
Typ.
Max.
Min.
Typ.
Max.
25℃
-
2
7
-
1
7
full range
-
-
15
-
-
15
25℃
-
5
50
-
5
50
full range
-
-
150
-
-
150
25℃
-
25
250
-
25
250
full range
-
-
400
-
-
400
25℃
25
200
-
25
200
-
25℃
-
0.4
1
-
1.1
2
full range
-
1
2.5
-
1.3
2.5
25℃
-
-
Vcc+-1.5
-
-
Vcc+-1.5
+
full range
-
-
Vcc -2.0
-
-
Vcc+-2.0
25℃
-
-
Vcc+
-
-
Vcc+
25℃
-
250
400
-
250
400
full range
-
-
700
-
-
700
25℃
-
0.1
-
-
0.1
full range
-
-
1
-
IOL
25℃
6
16
-
Small Single Response Time
tRE
25℃
-
1.3
Large Single Response Time
tREL
25℃
-
-
Conditions
Fig.
No.
mV
Vcc+=5 to 30[V],VO=1.4[V]
Vicm=0 to -1.5[V]
2
nA
VO=1.4[V]
2
nA
VO=1.4[V]
2
Vcc+=15[V],VO=1 to 11[V],
RL=15[kΩ]
2
V/mV
mA
Vcc+=5V,no load
Vcc+=30[V],no load
3
V
-
2
V
-
-
mV
VID=-1[V], Isink=4[mA]
3
-
nA
-
1
μA
Vcc+=30[V],VID=1[V]
VO=30[V]
3
6
16
-
mA
VID=-1[V],VO=1.5[V]
3
-
-
1.3
-
μs
1.0
-
-
1.0
μs
RL=5.1[kΩ], Vcc+=5[V]
VIN=100[mVp-p],
Overdrive=5[mV]
TTL input Vref=1.4[V]
RL=5.1[kΩ]
Output voltage at 95%
3
3
(*2) Absolute value
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
3/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
●Reference Data LM393 family
LM393 family
LM393 family
1
LM393PT
400
LM393DT
200
0
25
0.4
70℃
0.2
0
70
50
0.6
75
100
125
10
20
30
SUPPLY VOLTAGE [V]
AMBIENT TEMPERATURE [℃] .
Fig.1
LM393 family
OUTPUT SATU RATION VOLT AGE [mV]
OUTPUT SATURATION VOLTAGE [mV]
25℃
200
0℃
0
0
10
20
30
SUPPLY VOLTAGE [V]
300
5V
200
36V
100
0
OUTPUT SINK CURR ENT [mA]
36V
20
2V
10
(IOL=4[mA])
20 30 40 50 60 70
AMBIEN T TEMPERATURE [℃]
1.0
0.8
0.6
0.4
0℃
0.2
0
2
25℃
0
-2
70℃
-4
-6
8
8
.
INPUT BIAS CURRENT [nA]
25℃
80
60
40
70℃
20
4
2V
2
5V
0
-2
36V
-4
-6
30
40
0
10
20
30
SUPPLY VOLTAGE [V]
Fig. 10
Input Bias Current – Supply Voltage
50
60
70
80
Fig. 9
Input Offset Voltage – Ambient Temperature
LM393 family
50
40
120
36V
100
80
5V
60
40
2V
30
20
0℃
10
0
25℃
-10
70℃
-20
-30
-40
0
40
40
AMBIENT TEMPERATURE [℃]
LM393 family
160
20
0
LM393 family
6
Fig. 8
120
10 12 14 16 18 20
-8
10
Input Offset Voltage – Supply Voltage
LM393 family
30
6
(VCC=5[V])
LM393 family
0℃
2
4
Fig. 6
140
20
70℃
Low Level Output Voltage
– Output Sink Current
4
0
140
10
25℃
1.2
SUPPLY VOLTAGE [V]
160
0
1.4
OUTPUT SINK CURRENT [mA]
6
80
Fig. 7
20
1.6
80
-8
Output Sink Current – Ambient
Temperature
INPUT BIAS CURRENT [nA]
20 30 40 50 60 70
AMBIENT TEMPERATURE [℃]
8
0
0℃
1.8
Fig. 5
5V
(VOUT=1.5[V])
LM393 family
Output Saturation Voltage
– Ambient Temperature
LM393 family
80
0.0
0
40
30
100
20 30 40 50 60 70
AMBIENT TEMPER ATURE [℃]
2.0
2V
INPUT OFFSET VOLTAGE [mV]
(IOL=4[mA])
40
10
10
Supply Current – Ambient Temperature
400
Fig.4
0
5V
0
LM393 family
Output Saturation Voltage
– Supply Voltage
10
2V
0.2
Fig. 3
500
70℃
100
0.4
Fig.2
500
300
0.6
40
Supply Current – Supply Voltage
Derating Curve
400
36V
0
0
LOW LEVEL OUTPUT VOLTAGE [V]
0
25℃
INPUT OFFSET VOLTAGE [mV]
600
0.8
SUPPLY CURRENT [mA]
SUPPLY CURRENT [mA]
0.8
INPUT OFFSET CURRENT [nA]
POWER DISSIPATION [mW] .
800
LM393ST
LM393 family
1
0℃
.
1000
-50
0
10
20 30 40 50 60 70
AMBIENT TEMPERATURE [℃]
80
0
10
20
30
SUPPLY VOLTAGE [V]
40
Fig. 11
Fig. 12
Input Bias Current – Ambient Temperature
Input Offset Current – Supply Voltage
(*)The data above is ability value of sample, it is not guaranteed. LM393family: 0[℃]~+70[℃]
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
4/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
20
10
5V
0
-10
2V
-20
-30
-40
-50
.
130
LM393 family
25℃
120
110
100
70℃
80
70
20 30 40 50 60 70
AMBIENT TEMPERATURE [℃]
80
0
10
20
30
SUPPLY VOLTAGE [V]
Fig. 13
COMMON MODE REJECTION RATIO[dB]
.
POWER SUPPLY REJECTION RAT IO [dB]
LM393 family
160
140
120
25℃
0℃
100
80
70℃
60
40
0
10
20
30
SUPPLY VOLTAGE [V]
120
36V
110
5V
100
90
80
2V
70
60
10
5mV overdrive
2
20mV overdrive
1
100mV overdrive
10
20 30 40 50 60 70
AMBIENT TEMPERATURE [°C]
Fig. 19
Response Time (Low to High)
– Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
70
60
0
10
20 30 40 50 60 70
AMBIENT TEMPERATURE [°C]
80
80
LM393 family
140
130
120
110
100
90
80
70
60
0
10
20 30 40 50 60 70
AMBIENT TEMPERAT URE [°C]
80
Fig. 18
Power Supply Rejection Ratio
– Ambient Temperature
.
4
3
5mV overdrive
2
20mV overdrive
100mV overdrive
1
0
0
0
80
LM393 family
5
RESPONSE TIME (HIGH to LOW) [μ s]
3
20 30 40 50 60 70
AMBIENT TEMPERATURE [°C]
Fig. 17
4
5V
2V
90
Fig. 15
Common Mode Rejection Ratio
– Ambient Temperature
LM393 family
100
Large Signal Voltage Gain
– Ambient Temperature
Fig. 16
5
110
Fig. 14
130
Common Mode Rejection Ratio
– Supply Voltage
36V
120
40
LM393 family
0
130
Large Signal Voltage Gain
– Supply Voltage
140
40
LM393 family
140
.
10
Input Offset Current – Ambient Temperature
. .
0℃
90
60
0
RESPONSE T IME (LOW to HIGH) [μs]
LARGE SIGNAL VOLT AGE GAIN [dB]
36V
30
140
POWER SUPPLY REJECTION RATIO [dB]
IN PUT OFFSET CU RRENT [nA]
40
.
LM393 family
50
LARGE SIGNAL VOLTAGE GAIN [dB]
●Reference Data LM393 family
80
0
10
20 30 40 50 60 70
AMBIENT TEMPERATURE [°C]
80
Fig. 20
Response Time (High to Low)
–Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
(*)The data above is ability value of sample, it is not guaranteed. LM393family: 0[℃]~+70[℃]
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
5/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
●Reference Data LM339 family
LM339 family
LM339 family
1
0℃
0.8
600
400
LM339DT
200
0
25
70
50
75
25℃
0.6
0.4
70℃
0.2
0
100
125
10
20
30
SUPPLY VOLTAGE [V]
AMBIENT TEMPERATURE [℃] .
Fig.21
Fig.22
Supply Current – Supply Voltage
LM339 family
200
0℃
100
0
0
10
20
30
SUPPLY VOLTAGE [V]
2V
300
5V
36V
100
0
10
Fig.24
2V
25℃
1.2
70℃
1.0
0.8
0.6
0.4
0℃
0.2
20 30 40 50 60 70
AMBIEN T TEMPERATURE [℃]
0℃
25℃
0
70℃
-4
-6
8
10 12 14 16 18 20
(VCC=5[V])
8
LM339 family
6
4
2V
2
5V
0
-2
36V
-4
-6
-8
0
80
6
Fig. 26
4
-2
4
Low Level Output Voltage
– Output Sink Current
6
2
2
OUTPUT SINK CURRENT [mA]
-8
10
1.4
0
10
20
30
40
0
10
20
30
40
50
60
70
80
AMBIENT TEMPERATURE [℃]
SUPPLY VOLTAGE [V]
Fig. 27
Fig. 28
Fig. 29
Output Sink Current – Ambient
Temperature
Input Offset Voltage – Supply Voltage
Input Offset Voltage – Ambient Temperature
(VOUT=1.5[V])
LM339 family
.
160
LM339 family
160
40
140
INPUT BIAS CURRENT [nA]
140
120
100
0℃
25℃
80
60
40
70℃
20
120
36V
100
80
5V
60
40
2V
20
0
10
20
30
40
SUPPLY VOLTAGE [V]
Fig. 30
Input Bias Current – Supply Voltage
30
20
0℃
10
0
25℃
-10
70℃
-20
-30
-40
0
0
LM339 family
50
INPUT OFFSET CURRENT [nA]
OUTPUT SINK CURR ENT [mA]
5V
0
1.6
80
LM339 family
8
0
INPUT BIAS CURRENT [nA]
20 30 40 50 60 70
AMBIENT TEMPERATURE [℃]
(IOL=4[mA])
LM339 family
36V
10
1.8
Fig. 25
30
20
LM339 family
Output Saturation Voltage
– Ambient Temperature
INPUT OFFSET VOLTAGE [mV]
(IOL=4[mA])
80
0.0
0
40
20 30 40 50 60 70
AMBIENT TEMPER ATURE [℃]
2.0
400
200
10
Supply Current – Ambient Temperature
LM339 family
Output Saturation Voltage
– Supply Voltage
40
0
LOW LEVEL OUTPUT VOLTAGE [V]
OUTPUT SATU RATION VOLT AGE [mV]
OUTPUT SATURATION VOLTAGE [mV]
25℃
300
2V
0.2
Fig. 23
500
70℃
400
0.4
40
Derating Curve
500
36V
5V
0.6
0
0
INPUT OFFSET VOLTAGE [mV]
0
0.8
SUPPLY CURRENT [mA]
LM339PT
SUPPLY CURRENT [mA]
POWER DISSIPATION [mW] .
800
LM339 family
1
.
1000
-50
0
10
20 30 40 50 60 70
AMBIENT TEMPERATURE [℃]
80
0
10
20
30
SUPPLY VOLTAGE [V]
40
Fig. 31
Fig. 32
Input Bias Current – Ambient Temperature
Input Offset Current – Supply Voltage
(*)The data above is ability value of sample, it is not guaranteed. LM339family: 0[℃]~+70[℃]
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
6/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
20
10
5V
0
-10
2V
-20
-30
-40
-50
.
130
LM339 family
25℃
120
110
100
80
70
20 30 40 50 60 70
AMBIENT TEMPERATURE [℃]
80
0
10
20
30
SUPPLY VOLTAGE [V]
Fig. 33
COMMON MODE REJECTION RATIO[dB]
.
POWER SUPPLY REJECTION RAT IO [dB]
LM339 family
160
140
120
25℃
0℃
100
80
70℃
60
40
0
10
20
30
SUPPLY VOLTAGE [V]
120
36V
110
5V
100
90
80
2V
70
60
10
5mV overdrive
2
20mV overdrive
1
100mV overdrive
20 30 40 50 60 70
AMBIENT TEMPERATURE [°C]
Fig. 39
Response Time (Low to High)
– Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
70
60
0
10
20 30 40 50 60 70
AMBIENT TEMPERATURE [°C]
80
80
LM339 family
140
130
120
110
100
90
80
70
60
0
10
20 30 40 50 60 70
AMBIENT TEMPERAT URE [°C]
80
Fig. 38
Power Supply Rejection Ratio
– Ambient Temperature
.
4
3
5mV overdrive
2
20mV overdrive
100mV overdrive
1
0
0
10
80
LM339 family
5
RESPONSE TIME (HIGH to LOW) [μ s]
3
0
20 30 40 50 60 70
AMBIENT TEMPERATURE [°C]
Fig. 37
4
5V
2V
90
Fig. 35
Common Mode Rejection Ratio
– Ambient Temperature
LM339 family
100
Large Signal Voltage Gain
– Ambient Temperature
Fig. 36
5
110
Fig. 34
130
Common Mode Rejection Ratio
– Supply Voltage
36V
120
40
LM339 family
0
130
Large Signal Voltage Gain
– Supply Voltage
140
40
LM339 family
140
.
10
Input Offset Current – Ambient Temperature
. .
0℃
70℃
90
60
0
RESPONSE T IME (LOW to HIGH) [μs]
LARGE SIGNAL VOLT AGE GAIN [dB]
36V
30
140
POWER SUPPLY REJECTION RATIO [dB]
IN PUT OFFSET CU RRENT [nA]
40
.
LM339 family
50
LARGE SIGNAL VOLTAGE GAIN [dB]
●Reference Data LM339 family
80
0
10
20 30 40 50 60 70
AMBIENT TEMPERATURE [°C]
80
Fig. 40
Response Time (High to Low)
–Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
(*)The data above is ability value of sample, it is not guaranteed. LM339family: 0[℃]~+70[℃]
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
7/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
●Reference Data LM2903 family
LM2903 family
800
1000
LM2903 family
LM2903 family
1.6
1.6
1.4
600
LM2903DT
400
400
200
200
SUPPLY CURRENT [mA]
SUPPLY CURRENT [mA]
LM2903PT
1.2
1.0
25℃
-40℃
0.8
0.6
0.4
0.2
105℃
0.0
00
2525
5050
75
75
100
100
125
125
AMBIENT TEMPERTURE [℃]
AMBIENT TEMPERATURE
.
10
20
30
Fig. 42
105℃
100
25℃
-40℃
0
30
150
2V
100
5V
50
36V
-25
0
25
50
75
0
105℃
0.6
0.4
-40℃
100
125
0
150
2
4
6
8
75
10
12
16
18
(IOL=4[mA])
(VCC=5[V])
LM2903 family
8
6
6
4
-40℃
2
0
25℃
-2
105℃
20
Fig. 46
Low Level Output Voltage
– Output Sink Current
8
125℃
-4
-6
100 125 150
14
OUTPUT SINK CURRENT [mA]
4
2V
2
0
5V
-2
36V
-4
-6
-8
-8
50
0.8
LM2903 family
INPUT OFFSET VOLTAGE [mV]
OUTPUT SINK CURRENT [mA]
10
25℃
125℃
1
Fig. 45
2V
25
1.2
Output Saturation Voltage
– Ambient Temperature
LM2903 family
0
1.4
0
-50
40
100 125 150
1.6
SUPPLY VOLTAGE [V]
20
75
0.2
40
36V
50
LM2903 family
0
(IOL=4[mA])
-25
25
1.8
Fig. 44
-50
0
2
Output Saturation Voltage
– Supply Voltage
5V
-25
Supply Current – Ambient Temperature
200
SUPPLY VOLTAGE [V]
30
-50
LM2903 family
MAXIMUM OUTPUT VOLTAGE [mV]
MAXIMUM OUTPUT VOLTAGE [mV]
125℃
20
2V
Fig. 43
LM2903 family
10
0.4
AMBIENT TEMPERATURE [℃]
Supply Current – Supply Voltage
200
0
5V
0.6
SUPPLY VOLTAGE [V]
[℃]
Fig. 41
50
36V
0.8
40
Derating Curve
150
1.0
0.0
0
150
150
OUTPUT VOLTAGE [V]
00
1.2
0.2
125℃
INPUT OFFSET VOLTAGE [mV]
POWER
DISSIPATION
POWER
DISSIPATION
Pd [mV]
[mW]
1.4
800
600
0
10
20
30
-50
40
-25
0
25
50
75
100 125 150
AMBIENT TEMPERATURE [℃]
SUPPLY VOLTAGE [V]
AMBIENT TEMPERATURE [℃]
Fig. 47
Fig. 48
Fig. 49
Output Sink Current – Ambient
Temperature
Input Offset Voltage – Supply Voltage
Input Offset Voltage – Ambient Temperature
(VOUT=1.5[V])
LM2903 family
LM2903 family
50
140
140
40
120
-40℃
100
25℃
80
60
40
105℃
20
120
100
36V
80
60
40
5V
20
125℃
INPUT OFFSET CURRENT[nA]
160
INPUT BIAS CURRENT [nA]
INPUT BIAS CURRENT [nA]
LM2903 family
160
0
5
10
15
20
25
30
35
SUPPLY VOLTAGE [V]
Fig. 50
Input Bias Current – Supply Voltage
20
-40℃
10
25℃
0
-10
105℃
125℃
-20
-30
-40
2V
0
0
30
-50
-50
-25
0
25
50
75
100 125 150
0
10
20
30
40
AMBIENT TEMPERATURE [℃]
SUPPLY VOLTAGE [V]
Input Bias Current – Ambient Temperature
Input Offset Current – Supply Voltage
Fig. 51
Fig. 52
(*)The data above is ability value of sample, it is not guaranteed. LM2903family:-40[℃]~+125[℃]
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
8/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
●Reference Data LM2903 family
LM2903 family
30
20
2V
10
0
-10
5V
-20
36V
-30
-40
-50
-50
-25
0
25
50
75
130
140
LARGE SINGAL VOLTAGE GAIN [dB]
40
LM2903 family
LM2903 family
140
LARGE SINGAL VOLTAGE GAIN [dB]
INPUT OFFSET CURRENT [nA]
50
105℃
125℃
120
110
100
25℃
-40℃
90
80
70
60
100 125 150
0
10
AMBIENT TEMPERATURE [℃]
20
30
130
36V
120
110
100
80
70
60
-50
40
5V
15V
90
-25
0
25
50
75
100 125 150
AMBIENT TEMPERATURE [℃]
SUPPLY VOLTAGE [V]
Fig. 54
Fig. 55
Large Signal Voltage Gain
– Supply Voltage
Large Signal Voltage Gain
– Ambient Temperature
125℃
105℃
100
80
25℃
-40℃
60
40
0
10
20
30
40
125
36V
100
75
5V
2V
50
25
0
-25
0
25
Fig. 56
50
75
160
140
120
100
80
60
25
50
75
3
2
125℃
0
-80
-60
-40
-20
Fig. 60
RESPONSE TIME (HIGH TO LOW)[μs]
3
125℃
105℃
-40℃
1
0
80
3
4
5
Input Offset Voltage – Input Voltage
(VCC=5V)
5
4
3
100mV
overdrive
20mV overdrive
5mV overdrive
2
1
0
-50
-25
0
25
50
75
100 125 150
AMBIENT TEMPERATURE [℃]
Response Time (Low to High)
– Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
LM2903 family
4
60
2
Fig. 61
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
5
40
0
OVER DRIVE VOLTAGE [V]
LM2903 family
RESPONSE TIME (HIGH TO LOW)[μs]
-40℃
25℃
1
-100
100 125 150
105℃
Response Time (Low to High)
– Over Drive Voltage
20
1
LM2903 family
4
Fig. 59
0
0
Fig. 58
Power Supply Rejection Ratio
– Ambient Temperature
25℃
-1
INPUT VOLTAGE [V]
5
AMBIENT TEMPERATURE [℃]
2
-4
100 125 150
LM2903 family
RESPONSE TIME (LOW TO HIGH)[μs]
POWER SUPPLY REJECTION RATIO [dB]
180
0
-2
Fig. 57
LM2903 family
-25
125℃
0
Common Mode Rejection Ratio
– Ambient Temperature
200
-50
-40℃
2
AMBIENT TEMPERATURE [℃]
SUPPLY VOLTAGE [V]
Common Mode Rejection Ratio
– Supply Voltage
105℃
25℃
4
-6
-50
RRESPONSE TIME (LOW TO HIGH)[μs]
120
6
150
INPUT OFFSET VOLTAGE [mV]
140
LM2903 family
LM2903 family
LM2903 family
160
COMMON MODE REJECTION RATIO [dB]
COMMON MODE REJECTION RATIO [dB]
Fig. 53
Input Offset Current – Ambient Temperature
100
OVER DRIVE VOLTAGE [V]
Fig. 62
Response Time (High to Low)
– Over Drive Voltage
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
5
4
100mV overdrive
3
20mV overdrive
5mV overdrive
2
1
0
-50
-25
0
25
50
75
100 125 150
AMBIENT TEMPERATURE [℃]
Fig. 63
Response Time (High to Low)
– Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
(*)The data above is ability value of sample, it is not guaranteed. LM2903family:-40[℃]~+125[℃]
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
9/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
●Reference Data LM2901 family
LM2901 family
1000
1000
LM2901 family
2.0
LM2901PT
600
600
400
400
LM2901DT
200
200
1.4
25℃
1.6
-40℃
1.4
1.2
1.0
0.8
0.6
125℃
0.4
25
50
25
75
50
100
75
125
100
125
AMBIENT TEMPERATURE [℃]
AMBIENT TEMPERATURE [℃]
150
0
150
10
20
LM2901 family
125℃
105℃
100
50
25℃
-40℃
10
20
30
LM2901 family
150
2V
100
5V
36V
50
1
0.8
105℃
0.6
0.4
-40℃
0
-25
0
25
50
75
100
125
0
150
2
4
6
8
0
-2
125℃
-4
-6
100 125 150
18
20
LM2901 family
8
6
4
2V
2
0
5V
-2
36V
-4
-6
-8
-8
75
16
(VCC=5[V])
2
105℃
14
Fig. 69
-40℃
25℃
12
Low Level Output Voltage
– Output Sink Current
6
4
10
OUTPUT SINK CURRENT [mA]
LM2901 family
8
0
25℃
125℃
1.2
0.2
-50
INPUT OFFSET VOLTAGE [mV]
10
50
1.4
(IOL=4[mA])
2V
25
1.6
Output Saturation Voltage
– Ambient Temperature
20
0
LM2901 family
SUPPLY VOLTAGE [V]
36V
100 125 150
2
Fig. 68
40
75
1.8
40
LM2901 family
50
Supply Current – Ambient Temperature
(IOL=4[mA])
-25
25
Fig. 66
Fig. 67
-50
0
Fig. 65
Output Saturation Voltage
– Supply Voltage
5V
-25
Supply Current – Supply Voltage
SUPPLY VOLTAGE [V]
30
2V
-50
INPUT OFFSET VOLTAGE [mV]
0
0.4
40
0
0
OUTPUT SINK CURRENT [mA]
30
200
MAXIMUM OUTPUT VOLTAGE [mV]
MAXIMUM OUTPUT VOLTAGE [mV]
150
5V
0.6
AMBIENT TEMPERATURE [℃]
Fig. 64
Derating Curve
200
36V
0.8
SUPPLY VOLTAGE [V]
OUTPUT VOLTAGE [V]
0
1.0
0.0
0.0
0
1.2
0.2
105℃
0.2
00
SUPPLY CURRENT [mA]
SUPPLY CURRENT [mA]
POWER DISSIPATION [mW]
POWER DISSIPATION Pd [mW]
1.8
800
800
LM2901 family
1.6
0
10
AMBIENT TEMPERATURE [℃]
20
30
-50
40
-25
0
25
50
75
100 125 150
AMBIENT TEMPERATURE [℃]
SUPPLY VOLTAGE [V]
Fig. 70
Fig. 71
Fig. 72
Output Sink Current – Ambient Temperature
Input Offset Voltage – Supply Voltage
Input Offset Voltage – Ambient Temperature
(VOUT=1.5[V])
LM2901 family
120
25℃
-40℃
100
80
60
40
105℃
20
125℃
140
120
100
36V
80
60
40
5V
20
2V
0
0
0
5
10
15
20
25
30
35
SUPPLY VOLTAGE [V]
50
INPUT OFFSET CURRENT[nA]
140
LM2901 family
LM2901 family
160
INPUT BIAS CURRENT [nA]
INPUT BIAS CURRENT [nA]
160
40
30
20
-40℃
10
25℃
0
-10
105℃
125℃
-20
-30
-40
-50
-50
-25
0
25
50
75
100 125 150
AMBIENT TEMPERATURE [℃]
0
10
20
30
40
SUPPLY VOLTAGE [V]
Fig. 73
Fig. 74
Fig. 75
Input Bias Current – Supply Voltage
Input Bias Current – Ambient Temperature
Input Offset Current – Supply Voltage
(*)The data above is ability value of sample, it is not guaranteed. LM2901family:-40[℃]~+125[℃]
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
10/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
●Reference Data LM2901 family
LM2901 family
30
20
2V
10
0
-10
36V
5V
-20
-30
-40
-50
-50
-25
0
25
50
75
130
125℃
105℃
120
110
100
25℃
-40℃
90
80
70
60
100 125 150
0
10
AMBIENT TEMPERATURE [℃]
20
30
Fig. 76
100
25℃
-40℃
60
40
20
30
40
125
36V
120
100
80
60
75
100
75
5V
2V
50
25
0
-25
0
25
50
75
-4
-1
-40℃
1
0
80
100
OVER DRIVE VOLTAGE [V]
Fig. 85
Response Time (High to Low)
– Over Drive Voltage
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
3
2
105℃
125℃
25℃
-40℃
1
0
-80
-60
4
5
-40
-20
0
5
4
3
5mV overdrive
100mV overdrive
20mV overdrive
2
1
0
-50
-25
0
25
50
75
100 125 150
AMBIENT TEMPERATURE [℃]
Fig. 84
Response Time (Low to High)
– Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
LM2901 family
RESPONSE TIME (HIGH TO LOW)[μs]
105℃
2
LM2901 family
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
125℃
1
(VCC=5V)
Fig. 83
60
0
Input Offset Voltage – Input Voltage
Response Time (Low to High)
– Over Drive Voltage
4
40
-2
OVER DRIVE VOLTAGE [V]
LM2901 family
20
125℃
0
Fig. 81
3
Fig. 82
0
-40℃
2
INPUT VOLTAGE [V]
4
AMBIENT TEMPERATURE [℃]
25℃
105℃
100 125 150
5
Power Supply Rejection Ratio
– Ambient Temperature
100 125 150
-6
-50
-100
100 125 150
5
75
4
RRESPONSE TIME (LOW TO HIGH)[μs]
140
50
LM2901 family
RESPONSE TIME (LOW TO HIGH)[μs]
POWER SUPPLY REJECTION RATIO [dB]
160
2
25
LM2901 family
AMBIENT TEMPERATURE [℃]
180
3
0
25℃
LM2901 family
50
-25
6
Fig. 80
25
-50
Fig. 78
Common Mode Rejection Ratio
– Ambient Temperature
0
60
Large Signal Voltage Gain
– Ambient Temperature
Fig. 79
-25
70
AMBIENT TEMPERATURE [℃]
Common Mode Rejection Ratio
– Supply Voltage
-50
80
150
SUPPLY VOLTAGE [V]
200
5V
15V
90
40
INPUT OFFSET VOLTAGE [mV]
125℃
10
100
LM2901 family
COMMON MODE REJECTION RATIO [dB]
COMMON MODE REJECTION RATIO [dB]
140
0
110
Large Signal Voltage Gain
– Supply Voltage
LM2901 family
80
36V
120
Fig. 77
160
105℃
130
SUPPLY VOLTAGE [V]
Input Offset Current – Ambient Temperature
120
LARGE SINGAL VOLTAGE GAIN [dB]
LARGE SINGAL VOLTAGE GAIN [dB]
INPUT OFFSET CURRENT [nA]
140
140
40
RESPONSE TIME (HIGH TO LOW)[μs]
LM2901 family
LM2901 family
50
5
4
100mV overdrive
3
20mV overdrive
5mV overdrive
2
1
0
-50
-25
0
25
50
75
100 125 150
AMBIENT TEMPERATURE [℃]
Fig. 86
Response Time (High to Low)
– Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
(*)The data above is ability value of sample, it is not guaranteed. BA2901: LM2901family:-40[℃]~+125[℃]
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
11/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
●Circuit Diagram
Vcc+
V0
Non-inverting
input
Inverting
input
Vcc-
Fig.87 Circuit Diagram (each Comparator)
●Measurement Circuit 1 NULL Method Measurement Condition
+
-
Vcc ,Vcc ,EK,Vicm unit:[V]
LM393/LM339 family
LM2903/LM2901 family
Calculation
Vcc+ Vcc- EK Vicm Vcc+ Vcc- EK Vicm
Parameter
VF
S1
S2
S3
Input Offset Voltage
VF1
ON
ON
ON 5 to 30
0
-1.4
0
5 to 30
0
-1.4
0
1
Input Offset Current
VF2
OFF OFF
ON
5
0
-1.4
0
5
0
-1.4
0
2
VF3
OFF
ON
5
0
-1.4
0
5
0
-1.4
0
VF4
ON
OFF
5
0
-1.4
0
5
0
-1.4
0
ON
ON
15
0
-1.4
0
15
0
-1.4
0
15
0
-11.4
0
15
0
-11.4
0
Input Bias Current
Large Signal Voltage Gain
VF5
VF6
ON
ON
3
4
-Calculation-
1.Input offset voltage (Vio)
0.1[μF]
VF1
Vio 
1+ Rf /Rs [V]
2. Input offset current (Iio)
S1
RK
EK
Vcc +
Iio  VF2 - VF1 [A]
Ri (1+ Rf / Rs)
3. Input bias current (Ib)
Rf
50[kΩ]
500[kΩ]
0.1[μF]
RS= 50[Ω]
Vicm
VF4 - VF3
[A]
Ib 
2× Ri (1+ Rf / Rs)
+15[V]
Ri= 10[kΩ]
Ri= 10[kΩ]
RK 500[kΩ]
DUT
S2
50[kΩ]
NULL
S3
RS= 50[Ω]
Vcc -
RL
1000[pF]
-15[V]
V VF
VRL
4.Large signal voltage gain (Av)
AV  20× Log 10× (1+ Rf /Rs) [dB]
VF6 - VF5
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
Fig.88 Measurement Circuit 1 (each Comparator)
12/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
●Measurement Circuit 2: Switch Condition
SW No.
Supply Current
―
SW
1
SW
2
SW
3
SW
4
SW
5
SW
6
SW
7
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
ON
OFF
Output Sink Current
VOL=1.5[V]
OFF
ON
Saturation Voltage
IOL=4[mA]
OFF
ON
ON
OFF
OFF
OFF
ON
Output Leakage Current
VOH=36[V]
OFF
ON
ON
OFF
OFF
OFF
ON
ON
OFF
ON
ON
OFF
ON
OFF
RL=5.1[kΩ]
Response Time
VRL=5[V]
Vcc + 5[V]
A
-
SW1
SW2
+
SW3
SW4
Vcc - 0[V]
SW5 SW6
SW7
RL
A
VIN-
VIN+
V
VRL
VOL/VOH
Fig.89 Measurement Circuit 2 (each Comparator)
Input waveform
VIN
Input waveform
VIN
over drive
+100[mV]
0[V]
0[V]
+100[mV]
over drive
VUOT
VUOT
Output waveform
Output waveform
5[V]
5[V]
2.5[V]
2.5[V]
0[V]
0[V]
Tre LH
Tre LH
Fig.90 Response Time
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
13/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
●Description of Electrical Characteristics
Described below are descriptions of the relevant electrical terms.
Please note that item names, symbols, and their meanings may differ from those on another manufacturer’s documents.
1. Absolute maximum ratings
The absolute maximum ratings are values that should never be exceeded, since doing so may result in deterioration of electrical
characteristics or damage to the part itself as well as peripheral components.
+
-
1.1 Power supply voltage (Vcc /Vcc )
Expresses the maximum voltage that can be supplied between the positive and negative power supply terminals without causing
deterioration of the electrical characteristics or destruction of the internal circuitry.
1.2 Differential input voltage (VID)
Indicates the maximum voltage that can be supplied between the non-inverting and inverting terminals without damaging the IC.
1.3 Input common-mode voltage range (VICM)
Signifies the maximum voltage that can be supplied to non-inverting and inverting terminals without causing deterioration of the
electrical characteristics or damage to the IC itself. Normal operation is not guaranteed within the input common-mode voltage range of
the maximum ratings – use within the input common-mode voltage range of the electric characteristics instead.
1.4 Operating temperature range and storage temperature range (Topr,Tstg)
The operating temperature range indicates the temperature range within which the IC can operate. The higher the ambient temperature,
the lower the power consumption of the IC. The storage temperature range denotes the range of temperatures the IC can be stored
under without causing excessive deterioration of the electrical characteristics.
1.5 Power dissipation (Pd)
Indicates the power that can be consumed by a particular mounted board at ambient temperature (25℃). For packaged products, Pd is
determined by the maximum junction temperature and the thermal resistance.
2. Electric characteristics
2.1 Input offset voltage (VIO)
Signifies the voltage difference between the non-inverting and inverting terminals. It can be thought of as the input voltage difference
required for setting the output voltage to 0V.
2.2 Input offset current (IIO)
Indicates the difference of the input bias current between the non-inverting and inverting terminals.
2.3 Input bias current (IIB)
Denotes the current that flows into or out of the input terminal, it is defined by the average of the input bias current at the non-inverting
terminal and the input bias current at the inverting terminal.
2.4 Input common-mode voltage range(VICM)
Indicates the input voltage range under which the IC operates normally.
2.5 Large signal differential voltage gain (AVD)
The amplifying rate (gain) of the output voltage against the voltage difference between the non-inverting and inverting terminals, it is
(normally) the amplifying rate (gain) with respect to DC voltage.
AVD = (output voltage fluctuation) / (input offset fluctuation)
2.6 Supply current (ICC)
Indicates the current of the IC itself that flows under specific conditions and during no-load steady state.
2.7 Low level output current (IOL)
Denotes the maximum current that can be output under specific output conditions.
2.8 Low level output voltage (VOL)
Signifies the voltage range that can be output under specific output conditions.
2.9 High level output current (IOH)
Indicates the current that flows into the IC under specific input and output conditions.
2.10 Response time (Tre)
The interval between the application of input and output conditions.
2.11 Common-mode rejection ratio (CMRR)
Denotes the ratio of fluctuation of the input offset voltage when the in-phase input voltage is changed (DC fluctuation).
CMRR = (change in input common-mode voltage) / (input offset fluctuation)
2.12 Power supply rejection ratio (PSRR)
Signifies the ratio of fluctuation of the input offset voltage when the supply voltage is changed (DC fluctuation).
PSRR = (change in power supply voltage) / (input offset fluctuation)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
14/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
SIGNATURE SERIES LM2903/2901/393/339 family
●Derating Curve
1000
600
POWER DISSIPATION Pd [mW]
POWER DISSIPATION Pd [mW]
800
LM393PT
LM2903PT
400
LM2903DT
LM393DT
200
0
LM339PT
800
600
LM2901PT
LM2901DT
400
LM339DT
200
0
0
25
50
75
100
125
150
0
AMBIENT TEMPERATURE [℃]
25
50
75
100
125
150
AMBIENT TEMPERATURE [℃]
LM393DT/PT/WDT/WPT
LM2903DT/PT
LM339DT/PT
LM2901DT/P
Power Dissipation
Package
Power Dissipation
Pd[W]
θja [℃/W]
Package
Pd[W]
θja [℃/W]
SO package8 (*8)
450
3.6
SO package14
610
4.9
TSSOP8 (*6)
500
4.0
TSSOP14
870
7.0
θja = (Tj-Ta)/Pd[℃/W]
θja = (Tj-Ta)/Pd[℃/W]
Fig.91 Derating Curve
●Precautions
1) Unused circuits
When there are unused circuits it is recommended that they be connected as in Fig.92,
setting the non-inverting input terminal to a potential within the in-phase input voltage
range (VICM).
2) Input terminal voltage
Applying Vcc + 36[V] to the input terminal is possible without causing deterioration
of the electrical characteristics or destruction, irrespective of the supply voltage.
However, this does not ensure normal circuit operation.
Please note that the circuit operates normally only when the input voltage is within
the common mode input voltage range of the electric characteristics.
3) Power supply (single / dual)
+
The op-amp operates when the specified voltage supplied is between Vcc
and Vcc . Therefore, the single supply op-amp can be used as a dual supply op-amp as well.
V cc +
-
+
V cc -
Fig.92 Disable circuit example
4) Power dissipation Pd
Using the unit in excess of the rated power dissipation may cause deterioration in the electrical characteristics due to a rise in chip
temperature, including reduced current capability. Therefore, please take into consideration the power dissipation (Pd) under actual
operating conditions and apply a sufficient margin in thermal design. Refer to the thermal derating curves for more information.
5) Short-circuit between pins and erroneous mounting
Incorrect mounting may damage the IC. In addition, the presence of foreign particles between the outputs, the output and the power
supply, or the output and Vcc may result in IC destruction.
6) Terminal short-circuits
+
When output and Vcc terminals are shorted, excessive output current may flow, resulting in undue heat generation and, subsequently,
destruction.
7) Operation in a strong electromagnetic field
Operation in a strong electromagnetic field may cause malfunctions.
8) Radiation
This IC is not designed to withstand radiation.
9) IC handing
Applying mechanical stress to the IC by deflecting or bending the board may cause fluctuations in the electrical characteristics due to
piezoelectric (piezo) effects.
10) Board inspection
Connecting a capacitor to a pin with low impedance may stress the IC. Therefore, discharging the capacitor after every process is
recommended. In addition, when attaching and detaching the jig during the inspection phase, ensure that the power is turned OFF
before inspection and removal. Furthermore, please take measures against ESD in the assembly process as well as during
transportation and storage.
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
15/17
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
●Ordering part number
L
M
3
3
9
W
Family name
LM393
LM339
LM2901
LM2903
D
ESD Tolerance
applicable
W : 2kV
None : Normal
T
Package type
D : S.O package
P : TSSOP
S : Mini SO
Packaging and forming specification
T: Embossed tape and reel
S.O package14
<Tape and Reel information>
8.65±0.1
(Max 9.0 include BURR)
0.65± 0.15
1
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
( reel on the left hand and you pull out the tape on the right hand
The direction is the 1pin of product is at the upper left when you hold
)
7
1PIN MARK
0.175 ± 0.075
S
+0.05
0.22 −0.03
1.375 ± 0.075
1.65MAX
0.515
1.05± 0.2
8
6.0 ± 0.2
3.9 ± 0.1
14
4° +6°
−4°
0.08 S
0.08 M
+0.05
0.42 −0.04
1.27
1pin
Reel
(Unit : mm)
Direction of feed
∗ Order quantity needs to be multiple of the minimum quantity.
TSSOP8
<Tape and Reel information>
3.0±0.1
(MAX 3.35 include BURR)
7
6
0.5 ± 0.15
3
2500pcs
Direction
of feed
( reel on the left hand and you pull out the tape on the right hand
4
1PIN MARK
The direction is the 1pin of product is at the upper left when you hold
)
1.0±0.2
2
Embossed carrier tape
Quantity
+0.05
0.145 −0.03
0.1 ± 0.05
S
1.0 ± 0.05
1.2MAX
1
0.525
Tape
5
6.4 ± 0.2
4.4 ± 0.1
8
4±4
0.08 S
+0.05
0.245 −0.04
0.08
M
1pin
0.65
Reel
(Unit : mm)
Direction of feed
∗ Order quantity needs to be multiple of the minimum quantity.
TSSOP14
<Tape and Reel information>
5.0±0.1
(Max 5.35 include BURR)
4 ±4
14
1
1.0±0.2
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
( reel on the left hand and you pull out the tape on the right hand
The direction is the 1pin of product is at the upper left when you hold
)
7
1PIN MARK
+0.05
0.145 −0.03
0.1±0.05
S
1.0±0.05
1.2MAX
0.55
0.5±0.15
6.4±0.2
4.4±0.1
8
0.08 S
0.65
+0.05
0.245 −0.04
0.08
1pin
M
(Unit : mm)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
Reel
16/17
Direction of feed
∗ Order quantity needs to be multiple of the minimum quantity.
2011.06 - Rev.C
LM393DT,LM393PT,LM393ST,LM393WDT,LM393WPT,
LM2903DT,LM2903PT,LM339DT,LM339PT,LM2901DT,LM2901PT
Technical Note
Mini SO8
<Tape and Reel information>
3.0±0.1
(MAX 3.35 include BURR)
6
5
0.45 ± 0.15
2
3
4
1PIN MARK
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
( reel on the left hand and you pull out the tape on the right hand
The direction is the 1pin of product is at the upper left when you hold
)
0.95 ± 0.2
1
+0.05
0.145 −0.03
0.525
0.1±0.05
S
0.85±0.05
1.1MAX
7
3.0 ± 0.1
4.9± 0.2
8
4±4
0.08 S
+0.05
0.32 −0.04
0.08
M
1pin
0.65
(Unit : mm)
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
Reel
17/17
Direction of feed
∗ Order quantity needs to be multiple of the minimum quantity.
2011.06 - Rev.C
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
R1120A
Similar pages