Wireless Charging Coils CTTX1065360SF www.ctparts.com SPECIFICATIONS Inductance Part Coil 1 & 3 Number (µH ±10%) CTTX1065360SF-12R5K 12.5 Test Freq. (Hz) 100K/1V DCR Typ. (mΩ) 60 DCR Max. (mΩ) 80 Irms Max. (A)Winding 6.5 Single Power (W) 5-10 Test Freq. (Hz) 100K/1V DCR Typ. (mΩ) 60 DCR Max. (mΩ) 80 Irms Max. (A)Winding 6.5 Single Power (W) 5-10 Inductance Part Coil 2 Number (µH ±10%) CTTX1065360SF-12R5K 11.5 PHYSICAL DIMENSIONS A C I D Not Shown at Actual Size J B CHARACTERISTICS Coil Description: Wireless power charging transmitter coil Applications: Used in wireless charging systems designed for a wide range of portable consumer electronic products such as mobile phones, tablets, cameras, MP3 players, battery chargers, scanners, gaming industry, etc. Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C (packaging) Irms: Based on temp. rise up to 40°C Max. Miscellaneous: RoHS Compliant; Compliant to Qi standard A6 design Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. Coil 1 Coil 2 Coil 3 Ferrite Sheet E H 3 1 4 5 6 F 2 Silicon Tube G Note: P1, 4 & 5: Red silicon tube P2, 3 & 6: Black silicon tube Schematic SIZE: mm A B C D E F Ref. G Ref. H I Max. J 106.0±0.5 53.0±0.5 49.2±4.0 24.6±2.0 20.0±2.0 1.0 5.0 5.0±1.0 6.0 2.5±0.5 Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2017 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 10.25.17