A TOGNUM GROUP BRAND DIESEL GENERATOR SET TYPE ADG28D 28 kVA/Prime/50Hz (31 kVA/LTP/50Hz) Optional equipment shown. Standard equipment may vary. BENEFITS // Most compact design // Air cooled engine – trouble-free // Lowest maintenance cost // High user-friendlyness cooling system SYSTEM RATINGS➀ Prime (LTP)➁ ADG28D ADG28D ADG28D Voltage (L-L) Phase PF Hz kWe kVA AMPS Generator model Temp rise Load acceptance 380V 3 0.8 50 22.4 (24.8) 28 (31) 43 ACG-0032-4-400 125°C (150°C) 100% 400V 3 0.8 50 22.4 (24.8) 28 (31) 40 ACG-0032-4-400 125°C (150°C) 100% 415V 3 0.8 50 22.4 (24.8) 28 (31) 39 ACG-0032-4-400 125°C (150°C) 100% ➀ Power available up to 25°C/100 m ➁ Technical data for prime power 2 / // / 50 Hz 28 kVA CERTIFICATIONS AND STANDARDS // Engine-generator set is designed and manufactured in facilities certified to standards ISO 9001:2008 // Performance Assurance Certification (PAC) - Engine-generator set tested to ISO 8528-5 for transient response - Verified product design, quality and performance integrity - All generator sets are type and factory tested // Power rating - Permissible average power output during 24 hours of operation is approved up to 75% for prime power rating - Permissible average power output during 24 hours of operation is approved up to 100% for limited time power rating. Operating hours are limited to 500 hours per year. STANDARD EQUIPMENT➀ // Engine // Generator Air cleaners Oil pump Oil drain extension & S/O valve Full pre-filter with water seperator Full flow oil filters Exhaust manifold – dry Blower fan & fan drive Electric starting motor – 12V Governor – mechanical SAE flywheel Flexible fuel connectors NEMA MG1, IEEE and ANSI standards compliance for temperature rise and motor starting VDE 0530, IEC 34.1, BS5000, CSA C22.2-100, AS1359 Self-ventilated Superior voltage waveform No load to full load regulation 125°C prime temperature rise (insulation class H) 1 bearing, sealed Full amortisseur windings 125% rotor balancing 3-phase voltage sensing Automatic voltage regulator ± 0,5% ➀ Represents standard product only. Consult Factory/MTU Onsite Energy distributor for additional configurations. 3 / // / 50 Hz 28 kVA STANDARD FEATURES➀ // The generator set complies to G2 // Engine-generator set tested to ISO // Self-exited 8528-5 for transient response // MTU Onsite Energy is a single source // Global product support // 2 year standard warranty // F3L 912 diesel engine — 4-cycle // Engine-generator resilient mounted supplier generator - Brushless, rotating field generator - 300% short circuit capability - 2/3 pitch windings // Cooling system 50°C - Integral set-mounted - Engine driven fan APPLICATION DATA // Engine // Fuel Manufacturer Model➁ Type Arrangement Displacement Bore: cm Stroke: cm Compression ratio Rated RPM (speed) Engine governor Gross power: kWm➁ Aspiration // Lubrication Deutz F3L 912 4-cycle 3/in-line 3.236 l 10.2 13.2 19 :1 1,500 Mechanical 28 kW Natural aspiration Consumption and Fuel Tank Capacity At 100% load At 75% load At 50% load At 25% load Capacity of base frame fuel tank (open set) Capacity of base frame fuel tank (sound proof) // Cooling System Max. ambient temperature: °C Fan power consumption: kW Cooling air flow: m3/h Air pressure loss: mbar Oil capacity (sump) min./max. Lube oil consumption (in % of fuel cons.) Oil pressure min. (warning) Oil pressure min. (shut-down) Max. oil temperature 9l 0.5 1.5 bar 1.5 bar 130 °C System Recommended fuel // Heat PRIME➁ 50 0.5 1565 10 System // Combustion // Fuel PRIME➁ 6.5 l/h (215 g/kWh) 5.0 l/h (218 g/kWh) 3.6 l/h (238 g/kWh) 2.5 l/h (320 g/kWh) 155 l 155 l Rejection Engine radiation and convection: kW Heat rejection of generator: kW 3/ Combustion air volume: m h Max. air intake restriction: mbar Air cleaner type // Exhaust see MTU fluids & lubrication spec. Air PRIME➁ 108 20 Dry, replaceable element with safety catridge System Max. exhaust gas temperature: °C Max. exhaust back pressure: mbar Exhaust gas flow: m3/h PRIME➁ approx. 23 approx. 4.1 ➀ Represents standard product only. Consult Factory/MTU Onsite Energy distributor for additional configurations. ➁ Technical data for prime power PRIME➁ 510 30 273 4 / // / 50 Hz 28 kVA WEIGHTS AND DIMENSIONS 1110 1737 1767 Drawing above for illustration purposes only, based on standard sound proof 400 volt engine-generator set. Do not use for installation design. See website for unit specific template drawings. System Sound Proof Unit (SPU) Dimensions (L x W x H) 1767 x 1110 x 1737mm Weight (dry/less tank) approx. 1035 kg NOISE EMISSION (SOUND PROOF) Sound power LWA: dB(A) Sound power LPA@1m: dB(A) Sound power LPA@7m: dB(A) 91 74 62 RATING DEFINITIONS AND CONDITIONS power ratings apply to installations where utility power is unavailable or unreliable. At varying load, the number of generator set operating hours is unlimited. A 10% overload capacity is available for one hour in twelve. Ratings are in accordance with ISO 8528-1, ISO 3046-1, BS 5514, AS 2789, and DIN 6271. // Limited time power ratings apply to installations served by a reliable utility source. The standby rating is applicable to constant or varying loads for the duration of a power outage. No overload capability for this rating. Ratings are in accordance with ISO 8528-1, ISO 3046-1, BS 5514, AS 2789 and DIN 6271. // Deration factor: Altitude: Consult your local MTU Onsite Energy distributor for altitude derations. Temperature: Consult your local MTU Onsite Energy distributor for temperature derations. Materials and specifications subject to change without notice. // A Tognum Group Company: MTU Onsite Energy Systems GmbH / 94099 Ruhstorf / Germany / Phone + 49 8531 97 82-0 / Fax + 49 8531 97 82-1510 / [email protected] /www.mtuonsiteenergy.com Subject to change. | 3236431 | Edition 01/13 | VMC 2013-07. // Prime