DTIPU16 Series 15 Watt Single Output AC/DC Desktop Power Supply Rev A FEATURES ● Splash Proof ● Single Output ● 2 Year Warranty ● Energy Star Compliant ● B Type: Class II Insulation ● Optional Output Connectors ● A & C Types: Class I Insulation ● 3 Types of Inlet Connectors Available ● Wide Input Voltage 90~264VAC, 47~63Hz ● -20°C~+70°C Operating Temperature Range Approval not for B Type SPECIFICATIONS: DTIPU16 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT (Vin) Operating Voltage Range Input Frequency Input Current (Low Line) Input Current (High Line) Inrush Current (Low Line) Inrush Current (High Line) Safety Ground Leakage Current Start-Up Time OUTPUT (Vo) Output Voltage Range Load Regulation Line Regulation Output Power Range Output Current Range *Ripple & Noise (peak to peak) Transient Response Time Hold-Up Time PROTECTION Over Voltage Protection Over Current Protection GENERAL Efficiency Dielectric Withstanding Voltage For Primary to Secondary Dielectric Withstanding Voltage Primary to Ground (For A & C Types Only) Isolation Resistance No Load Power Consumption ENVIRONMENTAL Operating Temperature Storage Temperature Relative Humidity Temperature Coefficient MTBF PHYSICAL Weight TEST CONDITIONS Min Max Unit 12 26 0.5 1 264 63 0.4 0.26 15 30 0.75 2 VAC Hz A A A A mA s 90 47 Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25°C, Cool Start, Vin = 115VAC Io = Full Load, 25°C, Cool Start, Vin = 230VAC Io = Full Load, Vin = 240VAC Io = Full Load, Vin = 100VAC 0.3 See Rating Chart 3 10 0.5 1 15 See Rating Chart 0.5 1 4 Vin = 230VAC Io = Full Load Vin = 90 to 264VAC Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC 5 Nil Nil. Output protected to short circuit conditions Io = Full Load, Vin = 230VAC 72 85 % % W % ms ms % % % Primary to Secondary 4242 VDC Primary to Ground 2121 VDC Test Voltage = 500VDC No Load, Vin = 240VAC Derate linearly from 100% Load at 40°C to 50% load at 70°C All Outputs Operating temperature at 25°C, Calculated per MIL-HDBK-217F 50 0 -20 -40 5 -0.04 0.4 0.5 70 85 95 +0.04 100,000 hours MΩ W °C °C % %/°C Approximately 165 grams 3.58 x 1.50 x 1.42 inches 91.0 x 38.0 x 36.0 mm IEC-320-C14, IEC-320-C8, IEC-320-C6 2 years Dimensions (L x W x H) Input Inlet Warranty SAFETY CISPR (EMI Requirements for CISPR-22) FCC (EMI Requirements for FCC Part-15) Nom Vin = 220VAC Vin = 110VAC *Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 B B Class Class DTIPU16 Series 15 Watt Single Output AC/DC Desktop Power Supply Rev A MODEL SELECTION CHART Model Number *DTIPU16A-101 *DTIPU16A-102 *DTIPU16A-103 *DTIPU16A-104 *DTIPU16A-105 *DTIPU16A-106 *DTIPU16A-107 *DTIPU16A-108 *DTIPU16A-109 DTIPU16A-110 DTIPU16A-111 *DTIPU16B-101 *DTIPU16B-102 *DTIPU16B-103 DTIPU16B-104 DTIPU16B-105 DTIPU16B-106 DTIPU16B-107 DTIPU16B-108 DTIPU16B-109 DTIPU16B-110 DTIPU16B-111 *DTIPU16C-101 *DTIPU16C-102 *DTIPU16C-103 *DTIPU16C-104 *DTIPU16C-105 *DTIPU16C-106 *DTIPU16C-107 *DTIPU16C-108 *DTIPU16C-109 DTIPU16C-110 DTIPU16C-111 Preset Voltage 5 VDC 6 VDC 8 VDC 11 VDC 13 VDC 16 VDC 21 VDC 27 VDC 33 VDC 40 VDC 48 VDC 5 VDC 6 VDC 8 VDC 11 VDC 13 VDC 16 VDC 21 VDC 27 VDC 33 VDC 40 VDC 48 VDC 5 VDC 6 VDC 8 VDC 11 VDC 13 VDC 16 VDC 21 VDC 27 VDC 33 VDC 40 VDC 48 VDC Output Voltage Range 3 ~ 5 VDC 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 48 VDC 3 ~ 5 VDC 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 48 VDC 3 ~ 5 VDC 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 48 VDC Output Current 2.50A max 2.50 ~ 2.00A 2.00 ~ 1.50A 1.87 ~ 1.36A 1.36 ~ 1.15A 1.15 ~ 0.94A 0.94 ~ 0.72A 0.72 ~ 0.55A 0.55 ~ 0.45A 0.45 ~ 0.37A 0.37 ~ 0.31A 2.50A max 2.50 ~ 2.00A 2.00 ~ 1.50A 1.87 ~ 1.36A 1.36 ~ 1.15A 1.15 ~ 0.94A 0.94 ~ 0.72A 0.72 ~ 0.55A 0.55 ~ 0.45A 0.45 ~ 0.37A 0.37 ~ 0.31A 2.50A max 2.50 ~ 2.00A 2.00 ~ 1.50A 1.87 ~ 1.36A 1.36 ~ 1.15A 1.15 ~ 0.94A 0.94 ~ 0.72A 0.72 ~ 0.55A 0.55 ~ 0.45A 0.45 ~ 0.37A 0.37 ~ 0.31A Total Regulation 7% 5% 5% 5% 5% 5% 5% 5% 5% 3% 3% 7% 5% 5% 5% 5% 5% 5% 5% 5% 3% 3% 7% 5% 5% 5% 5% 5% 5% 5% 5% 3% 3% Maximum Output Power 12W 12W 12W 15W 15W 15W 15W 15W 15W 15W 15W 12W 12W 12W 15W 15W 15W 15W 15W 15W 15W 15W 12W 12W 12W 15W 15W 15W 15W 15W 15W 15W 15W AC Inlet Connector IEC-320-C14 IEC-320-C8 IEC-320-C6 NOTES 1. The DTIPU16 Series is designated as DTIPU16x-y where x represents the type of AC input inlet connector, which can either be A (IEC-320-C14), B (IEC-320-C8), or C (IEC-320-C6); y can be 101, 102, 103, 104, 105, 106, 107, 108, 109, 110 or 111 for output voltage. 2. The output voltage is specified as a range (Ex: 40 ~ 48VDC); the preset voltage will be set as standard models if nothing different is requested. Please contact factory for ordering details. 3. The “ * ” symbol means PSE approval. 4. A & C Types Only: Models with output voltages under 30VDC have been approved by TUV/PSE. 5. Optional output connectors are available. Please call the factory for more details. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Rev A MECHANICAL DRAWING Unit: inches [mm] Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DTIPU16 Series 15 Watt Single Output AC/DC Desktop Power Supply