OPA731 Series 20 Watt Light Flood on Anotherm Linear Heat Spreader OPA731 Series • • • • • OPA731_ (120° Beam Angle) 20, 1 watt LEDs per square substrate Mono-color per strip (Blue, Green, Red, Yellow, White) Two component beam angle options (120° or 40°) Universal connector (Tyco 2-292173-2 mates with 173977-2) RoHS Compliant Product Photo Here OPA731_D (40° Beam Angle) The OPA731 Series are designed for areas where lighting intensity and reliability are essential. The light beam angles of 40° and 120° are ideal for illuminating small and medium size areas while requiring minimal space. A patented substrate is used to ensure the best heat dissipation of any light assembly in the industry. For custom colors and design contact your OPTEK representative. Electrical / Optical Characteristics: TA=25°C, IF=1.4A Color Dominant Wavelength 700 Yellow 587 nm 18.0 180 Blue 470 nm OPA731G 18.0 960 Green 530 nm OPA731R 12.5 520 Red 625 nm OPA731W 18.0 960 White 6,500°K OPA731YD 12.5 700 Yellow 587 nm OPA731BD 18.0 180 Blue 470 nm OPA731GD 18.0 960 Green 530 nm OPA731RD 12.5 520 Red 625 nm OPA731WD 18.0 960 White 6,500°K Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA731Y 12.5 OPA731B Beam Angle 120° 40° + Voltage Ground OPA731_ OPA731_D See OVSP_BCR4 for component specifications See OVSP_4CR44 for component specifications DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 04/06 Page 1 of 1