SMD Power Inductor C2DEP1010 Description • Ferrite core 2 in 1 construction. • Magnetically shielded. • L W H:13.3 11.0 x10.2 mm Max. • Product weight: 5.2g(Ref.) • Moisture Sensitivity Level: 1 • RoHS compliance. • Halogen Free available. RoHS × × Halogen Free Environmental Data • Operating temperature range: -40 ~+105 (including coil’s self temperature rise) • Storage temperature range: -40 +105 • Solder reflow temperature: 260 peak. ℃ ℃～ ℃ Dimension - [mm] 10.2 Max. 9.0 ℃ ℃ Packaging • Carrier tape and reel packaging • 13.0”diameter reel • 250pcs per reel 6.4 10.5 2.0 12.8 × 1.9 Applications • Ideally used in LPF of digital amplifiers. Land pattern and Schematics - [mm] 14.0 8.0 2 . 6 . 4 8 Electrical Characteristics Part Name Stamp C2DEP1010NP-100MC-120 100 C2DEP1010NP-120MC-120 120 C2DEP1010NP-150MC-120 150 C2DEP1010NP-180MC-120 180 C2DEP1010NP-220MC-120 220 Inductance( (1-2);(4-3) μH) ※1 μH±20% 12μH±20% 15μH±20% 18μH±20% 22μH±20% 10 Ω ℃ ※ D.C.R. (m ) [MAX.](at 20 ) (1-2);(4-3) 2 Saturation Current (A) (at 20 ) 3 Temperature rise Current (A) 4 14.0 (11.0) 6.2(7.3) 6.6(7.6) 18.0 (15.0) 6.0(7.0) 5.7(6.5) 20.0 (16.0) 5.4(6.1) 5.4(6.2) 25.0 (21.0) 4.8(5.8) 5.0(5.6) 27.0 (22.0) 4.3(5.1) 4.9(5.5) ℃※ ※ ※1 Inductance tested at 100kHz. ※2 ( ) are typical Value. ※3 This indicates the value of current when the inductance decreases to 75% of the nominal value. ※4 Temperature rise current: the value of DC current when the temperature rise is △T=40℃(Ta=20℃). Page 1 of 2 Revised: 1-Jun-11 SMD Power Inductor C2DEP1010 Saturation Current & Temperature Rise Graph L (20 ℃) △T μH)1. C2DEP1010NP-100MC-120△T (℃) L( 60 18 60 18 60 10 50 15 50 15 50 8 40 12 40 12 40 6 30 9 30 9 30 4 20 6 20 6 20 2 10 3 10 3 10 0 0 0 0 0 0 L( 12 μH)2. C2DEP1010NP-120MC-120△T (℃) 0.0 1.5 3.0 4.5 6.0 7.5 9.0 24 0.0 1.5 3.0 4.5 6.0 7.5 9.0 DC (A) μH)4. C2DEP1010NP-180MC-120△T (℃) L( DC (A) μH)5. C2DEP1010NP-220MC-120△T (℃) 60 24 60 20 50 20 50 16 40 16 40 12 30 12 30 8 20 8 20 4 10 4 10 0 0 0 0 0 1 2 3 4 5 μH)3. C2DEP1010NP-150MC-120△T (℃) 0.0 1.5 3.0 4.5 6.0 7.5 9.0 DC (A) L( L( 6 0 1 2 DC (A) 3 4 5 6 DC (A) Solder Reflow Condition T (℃) 300 250 Heat Endurance 260℃ 230℃ 200 0 60 120 180 240 245℃ PEAK 230 150 60 100 Temperature Chart 200 10 150 50 0 T (℃) 300 250 170 100 300 T (s) 40s ±10 ℃,60~120s ℃ 50 0 0 60 120 180 240 300 T (s) Please refer to the sales offices on our website - http://www.sumida.com Hong Kong Shanghai Shenzhen Taipei Tel.+852-2880-6688 FAX.+852-2565-9600 [email protected] Tel.+86-021-5836-3299 FAX.+86-021-5836-3266 [email protected] Tel.+86-755-8291-0228 FAX.+86-755-8291-0338 [email protected] Tel.+886-2-8751-2737 FAX.+886-2-8751-2738 [email protected] Tokyo Seoul Singapore San Jose Tel.+81-3-5202-7112 FAX.+81-3-5202-7105 [email protected] Tel.+82-2-6237-0777 FAX.+82-2-6237-0778 [email protected] Tel.+65-6296-3388 FAX.+65-6296-3390 [email protected] Tel.+1-408-3219660 FAX.+1-408-321-9308 [email protected] Chicago Obernzell Neumarkt Tel.+1-847-545-6700 FAX. +1-847-545-6720 [email protected] Tel.+49-8591-937-0 FAX. +49-8591-937-103 [email protected] Tel.+49-9181-4509-110 FAX. +49-9181-4509-310 [email protected] Page 2 of 2 Revised: 1-Jun-11