UNISONIC TECHNOLOGIES CO., LTD LD2117/A LINEAR INTEGRATED CIRCUIT LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS DESCRIPTION 1 SOT-223 The UTC LD2117/A is a low dropout, 3-terminal positive voltage regulator designed to provide output current up to 800mA/1A, There are adjustable versions (VREF=1.25V) and various fixed versions. FEATURES * Low dropout voltage * Suitable for SCSI-2 active termination if VOUT set to 2.85V * Output current up to 0.8A for 2117 and 1.0A for 2117A * Built-in current limit and over temperature protection * Available in ±1%(at 25°C) and 2% in all temperature range * Ultra low current consumption (0.35mA typ.) * Ultra low Adjustment Current (7μA typ.) * Ultra low minimum Load (0.3mA typ.) * Stable with low ESR ceramic output capacitor (MLCC) ORDERING INFORMATION Lead Free Ordering Number Halogen Free LD2117cL-xx-AA3-d-R Note: Pin Assignment: I: VIN LD2117cG-xx-AA3-d-R O: VOUT Package SOT-223 d Pin Assignment A: AOI B: OAI C: AIO D: IAO Packing Tape Reel A: ADJ www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd 1 of 12 QW-R102-042.D LD2117/A MARKING INFORMATION PACKAGE SOT-223 LINEAR INTEGRATED CIRCUIT VOLTAGE CODE 12 :1.2V 15 :1.5V 18 :1.8V 30 :3.0V 33 :3.3V 36 :3.6V 50 :5.0V AD :ADJ MARKING Current Code Voltage Code L: Lead Free G: Halogen Free Pin Code LD2117 XX 1 Date Code 2 3 BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 12 QW-R102-042.D LD2117/A LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATING (TA=25°C) PARAMETER SYMBOL RATINGS UNIT DC Input Voltage VIN 18 V Power Dissipation PD Internally limited W Junction Temperature TJ +150 °C Storage temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING RATINGS PARAMETER Input Voltage Operating Junction Temperature RATINGS 15 0 ~ +125 UNIT V °C SYMBOL θJA θJC RATINGS 165 15 UNIT °C/W °C/W THERMAL DATA PARAMETER Junction to Ambient Junction to Case SYMBOL VIN TJ ELECTRICAL CHARACTERISTICS (TA=25°C, refer to the test circuits, TJ=0 ~ 125°C, CO=10μF unless otherwise specified) For LD2117/A-1.2 PARAMETER SYMBOL TEST CONDITIONS MIN Output Voltage VOUT VIN=3.2V, IOUT=10mA, TJ=25°C 1.188 VIN=2.7 ~ 8V Output Voltage VOUT LD2117 : IOUT=10~800mA 1.188 LD2117A : IOUT=10~1000mA Line Regulation ΔVOUT VIN=2.7 ~ 8V, IOUT=10mA VIN=2.7V Load Regulation ΔVOUT LD2117 : IOUT=10~800mA LD2117A : IOUT=10~1000mA Temperature stability ΔVOUT Long Term Stability ΔVOUT 1000 hrs, TJ=125°C Operating Input Voltage VIN IOUT=100mA Quiescent Current IQ VIN≤10V LD2117 800 Current Limit ILIMIT VIN=6.2V, TJ=25°C LD2117A 1000 Output Noise Voltage eN B=10Hz ~ 10KHz, TJ=25°C IOUT=40mA, f=120Hz, TJ=25°C, 75 Supply Voltage Rejection SVR VIN=4.2V, VRIPPLE=1VPP IOUT=100mA IOUT=500mA Dropout Voltage VD IOUT=800mA IOUT=1A Thermal Regulation TA=25°C, 30ms Pulse Thermal Shutdown OTP UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP 1.200 MAX 1.212 UNIT V 1.200 1.212 V 1 6 mV 1 10 mV 15 0.5 % % V mA 0.5 0.3 0.35 mA μV 100 dB 1.05 1.15 1.18 1.22 0.01 150 1.15 1.25 1.28 1.35 0.10 V %/W °C 3 of 12 QW-R102-042.D LD2117/A LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) For LD2117/A-1.5 PARAMETER Output Voltage Output Voltage Line Regulation Load Regulation Temperature stability Long Term Stability Operating Input Voltage Quiescent Current Current Limit Output Noise Voltage Supply Voltage Rejection Dropout Voltage Thermal Regulation Thermal Shutdown For LD2117/A-1.8 PARAMETER Output Voltage Output Voltage Line Regulation Load Regulation Temperature stability Long Term Stability Operating Input Voltage Quiescent Current Current Limit Output Noise Voltage Supply Voltage Rejection Dropout Voltage Thermal Regulation Thermal Shutdown SYMBOL TEST CONDITIONS VOUT VIN=3.5V, IOUT=10mA, TJ=25°C VIN=3 ~ 8V VOUT LD2117 : IOUT=0~800mA LD2117A : IOUT=0~1000mA ΔVOUT VIN=3 ~ 8V, IOUT=0mA VIN=3V ΔVOUT LD2117 : IOUT=0~800mA LD2117A : IOUT=0~1000mA ΔVOUT ΔVOUT 1000 hrs, TJ=125°C VIN IOUT=100mA IQ VIN≤10V LD2117 ILIMIT VIN=6.5V, TJ=25°C LD2117A eN B=10Hz ~ 10KHz, TJ=25°C IOUT=40mA, f=120Hz, TJ=25°C, SVR VIN=4.5V, VRIPPLE=1VPP IOUT=100mA IOUT=500mA VD IOUT=800mA IOUT=1A TA=25°C, 30ms Pulse OTP SYMBOL TEST CONDITIONS VOUT VIN=3.8V, IOUT=10mA, TJ=25°C VIN=3.3 ~ 8V VOUT LD2117 : IOUT=0~800mA LD2117A : IOUT=0~1000mA ΔVOUT VIN=3.3 ~ 8V, IOUT=0mA VIN=3.3V ΔVOUT LD2117 : IOUT=0~800mA LD2117A : IOUT=0~1000mA ΔVOUT ΔVOUT 1000 hrs, TJ=125°C VIN IOUT=100mA IQ VIN≤10V LD2117 ILIMIT VIN=6.8V, TJ=25°C LD2117A eN B=10Hz ~ 10KHz, TJ=25°C IOUT=40mA, f=120Hz, TJ=25°C, SVR VIN=5.5V, VRIPPLE=1VPP IOUT=100mA IOUT=500mA VD IOUT=800mA IOUT=1A TA=25°C, 30ms Pulse OTP UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.485 TYP 1.500 MAX 1.515 UNIT V 1.485 1.500 1.515 V 1 6 mV 1 10 mV 15 0.5 % % V mA 0.5 0.3 0.35 800 1000 mA μV 100 75 dB 1.05 1.15 1.18 1.22 0.01 150 1.15 1.25 1.28 1.35 0.10 MIN 1.782 TYP 1.800 MAX 1.818 UNIT V 1.782 1.800 1.818 V 1 6 mV 1 10 mV 15 0.5 % % V mA 0.5 0.3 0.35 800 1000 V %/W °C mA μV 100 75 dB 1.05 1.15 1.18 1.22 0.01 150 1.15 1.25 1.28 1.35 0.10 V %/W °C 4 of 12 QW-R102-042.D LD2117/A LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) For LD2117/A-3.0 PARAMETER Output Voltage Output Voltage Line Regulation Load Regulation Temperature stability Long Term Stability Operating Input Voltage Quiescent Current Current Limit Output Noise Voltage Supply Voltage Rejection Dropout Voltage Thermal Regulation Thermal Shutdown For LD2117/A-3.3 PARAMETER Output Voltage Output Voltage Line Regulation Load Regulation Temperature stability Long Term Stability Operating Input Voltage Quiescent Current Current Limit Output Noise Voltage Supply Voltage Rejection Dropout Voltage Thermal Regulation Thermal Shutdown SYMBOL TEST CONDITIONS VOUT VIN=5V, IOUT=10mA, TJ=25°C VIN=4.5 ~ 10V VOUT LD2117 : IOUT=0~800mA LD2117A : IOUT=0~1000mA ΔVOUT VIN=4.5 ~ 12V, IOUT=0mA VIN=4.5V ΔVOUT LD2117 : IOUT=0~800mA LD2117A : IOUT=0~1000mA ΔVOUT ΔVOUT 1000 hrs, TJ=125°C VIN IOUT=100mA IQ VIN≤15V LD2117 ILIMIT VIN=8V, TJ=25°C LD2117A eN B=10Hz ~ 10KHz, TJ=25°C IOUT=40mA, f=120Hz, TJ=25°C, SVR VIN=6V, VRIPPLE=1VPP IOUT=100mA IOUT=500mA VD IOUT=800mA IOUT=1A TA=25°C, 30ms Pulse OTP SYMBOL TEST CONDITIONS VOUT VIN=5.3V, IOUT=10mA, TJ=25°C VIN=4.75 ~ 10V VOUT LD2117 : IOUT=0~800mA LD2117A : IOUT=0~1000mA ΔVOUT VIN=4.75 ~ 15V, IOUT=0mA VIN=4.75V ΔVOUT LD2117 : IOUT=0~800mA LD2117A : IOUT=0~1000mA ΔVOUT ΔVOUT 1000 hrs, TJ=125°C VIN IOUT=100mA IQ VIN≤15V LD2117 ILIMIT VIN=8.3V, TJ=25°C LD2117A eN B=10Hz ~ 10KHz, TJ=25°C IOUT=40mA, f=120Hz, TJ=25°C, SVR VIN=6.3V, VRIPPLE=1VPP IOUT=100mA IOUT=500mA VD IOUT=800mA IOUT=1A TA=25°C, 30ms Pulse OTP UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN. 2.970 TYP. 3.000 MAX. 3.030 UNIT V 2.970 3.000 3.030 V 1 6 mV 1 10 mV 15 0.5 % % V mA 0.5 0.3 0.35 800 1000 mA μV 100 75 dB 1.05 1.15 1.18 1.22 0.01 150 1.15 1.25 1.28 1.35 0.10 MIN. 3.267 TYP. 3.300 MAX. 3.333 UNIT V 3.267 3.300 3.333 V 1 6 mV 1 10 mV 15 0.5 % % V mA 0.5 0.3 0.35 800 1000 V %/W °C mA μV 100 75 dB 1.05 1.15 1.18 1.22 0.01 150 1.15 1.25 1.28 1.35 0.10 V %/W °C 5 of 12 QW-R102-042.D LD2117/A LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) For LD2117/A-3.6 PARAMETER Output Voltage Output Voltage Line Regulation Load Regulation Temperature stability Long Term Stability Operating Input Voltage Quiescent Current Current Limit Output Noise Voltage Supply Voltage Rejection Dropout Voltage Thermal Regulation Thermal Shutdown For LD2117/A-5.0 PARAMETER Output Voltage Output Voltage Line Regulation Load Regulation Temperature stability Long Term Stability Operating Input Voltage Quiescent Current Current Limit Output Noise Voltage Supply Voltage Rejection Dropout Voltage Thermal Regulation Thermal Shutdown SYMBOL TEST CONDITIONS VOUT VIN=5.6V, IOUT=10mA, TJ=25°C VIN=5 ~ 10V VOUT LD2117 : IOUT=0~800mA LD2117A : IOUT=0~1000mA ΔVOUT VIN=5 ~ 15V, IOUT=0mA VIN=5V ΔVOUT LD2117 : IOUT=0~800mA LD2117A : IOUT=0~1000mA ΔVOUT ΔVOUT 1000 hrs, TJ=125°C VIN IOUT=100mA IQ VIN≤15V LD2117 ILIMIT VIN=8.6V, TJ=25°C LD2117A eN B=10Hz to 10KHz, TJ=25°C IOUT=40mA, f=120Hz, TJ=25°C, SVR VIN=6.6V, VRIPPLE=1VPP IOUT=100mA IOUT=500mA VD IOUT=800mA IOUT=1A TA=25°C, 30ms Pulse OTP SYMBOL TEST CONDITIONS VOUT VIN=7V, IOUT=10mA, TJ=25°C VIN=6.5 ~ 15V VOUT LD2117 : IOUT=0~800mA LD2117A : IOUT=0~1.0A ΔVOUT VIN=6.5 ~ 15V, IOUT=0mA VIN=6.5V ΔVOUT LD2117 : IOUT=0~800mA LD2117A : IOUT=0~1000mA ΔVOUT ΔVOUT 1000 hrs, TJ=125°C VIN IOUT=100mA IQ VIN≤15V LD2117 ILIMIT VIN=10V, TJ=25°C LD2117A eN B=10Hz to 10KHz, TJ=25°C IOUT=40mA, f=120Hz, TJ=25°C, SVR VIN=8V, VRIPPLE=1VPP IOUT=100mA IOUT=500mA VD IOUT=800mA IOUT=1A TA=25°C, 30ms Pulse OTP UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN. 3.564 TYP. 3.600 MAX. 3.636 UNIT V 3.564 3.600 3.636 V 1 6 mV 1 10 mV 15 0.5 % % V mA 0.5 0.3 0.35 800 1000 mA μV 100 75 dB 1.05 1.15 1.18 1.22 0.01 150 1.15 1.25 1.28 1.35 0.10 MIN. 4.950 TYP. 5.000 MAX. 5.050 UNIT V 4.950 5.000 5.050 V 1 6 mV 1 15 mV 15 0.5 % % V mA 0.5 0.3 0.35 800 1000 V %/W °C mA μV 100 75 dB 1.05 1.15 1.18 1.22 0.01 150 1.15 1.25 1.28 1.35 0.10 V %/W °C 6 of 12 QW-R102-042.D LD2117/A LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) For LD2117/A-ADJ PARAMETER Reference Voltage SYMBOL TEST CONDITIONS VREF VIN-VOUT=2V, IOUT=10mA, TJ=25°C VIN-VOUT=1.4~10V Reference Voltage VREF LD2117A : IOUT=10~1000mA Line Regulation ΔVOUT VIN-VOUT=1.5 ~ 13.75V, IOUT=10mA VIN-VOUT=3V Load Regulation ΔVOUT LD2117 : IOUT=10~800mA LD2117A : IOUT=10~1000mA Temperature stability ΔVOUT Long Term Stability ΔVOUT 1000 hrs, TJ=125°C Operating Input Voltage VIN Adjustment Pin Current IADJ VIN≤15V VIN-VOUT=1.4~10V, Adjustment Pin Current Change ΔIADJ LD2117A : IOUT=10 ~ 1000mA Minimum Load Current IO(MIN) VIN=15V LD2117 Current Limit ILIMIT VIN-VOUT=5V, TJ=25°C LD2117A Output Noise (%VO) eN B=10Hz ~ 10KHz, TJ=25°C IOUT=40mA, f=120Hz, TJ=25°C, Supply Voltage Rejection SVR VIN-VOUT=3V, VRIPPLE=1VPP IOUT=100mA IOUT=500mA Dropout Voltage VD IOUT=800mA IOUT=1A Thermal Regulation TA=25°C, 30ms Pulse Thermal Shutdown OTP UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.125 TYP 1.25 MAX 1.375 UNIT V 1.125 1.25 1.375 V 0.035 0.2 % 0.1 0.4 % 7 15 10 % % V μA 0.3 2 μA 0.3 1 mA 0.50 0.3 800 1000 mA 0.003 % 75 dB 1.05 1.15 1.18 1.22 0.01 150 1.15 1.25 1.28 1.35 0.10 V %/W °C 7 of 12 QW-R102-042.D LD2117/A LINEAR INTEGRATED CIRCUIT APPLICATION NOTE of LD2117/A ADJUSTABLE The LD2117/A adjustable has a reference voltage of between the OUT and ADJ pins. IADJ is 7μA typ. (10μA max.) and ΔIADJ is 0.3μA typ. (2µA max.). R1 is normally fixed to 1.2kΩ. From figure 4 we obtain: VOUT=VREF+R2(IADJ+IR1)=VREF + R2(IADJ+VREF/R1)=VREF(1+R2/R1) + R2 × IADJ. Usually R2 value is in the range of few KΩ, so the R2 X IADJ product could be neglected; then the above expression becomes: VOUT=VREF(1+R2/R1) For better load regulation, realize a good Kelvin connection of R1 and R2 is important. Particularly R1 connection must be realized very close to OUT and ADJ pin, while R2 ground connection must be placed as near as possible to the negative Load pin. Ripple rejection can be improved by introducing a 10μF electrolytic capacitor placed in parallel to the R2 resistor (See Fig. 5) The UTC LD2117/A also supports MLCC. See Fig.6 for adjustable output and Fig.7 for fixed Output UTC LD2117/A VIN IN + OUT ADJ 10µF VOUT + 10µF R1 1.2kΩ VREF R2 Fig.4 Adjustable Output Voltage Application Circuit Fig.5 Adjustable Output Voltage Application with improved Ripple Rejection. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 8 of 12 QW-R102-042.D LD2117/A LINEAR INTEGRATED CIRCUIT APPLICATION NOTE of LD2117/A ADJUSTABLE(Cont.) Fig.6 Adjustable Output Voltage Application Circuit for MLCC UTC LD2117/A VIN GND 10μF VOUT VOUT VIN 10μF Fig.7 Fixed Output Voltage Application Circuit for MLCC UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 9 of 12 QW-R102-042.D LD2117/A LINEAR INTEGRATED CIRCUIT TYPICAL CHARACTERISTICS Input Voltage Change (V) Load Current (mA) Output Voltage Deviation (mV) Output Voltage Deviation (mV) Dropout Voltage (VIN-VOUT) TJ=25°C 1.2 1.1 1.0 TJ=125°C 0.9 0.8 80 CADJ =22µF IOUT=0.1A 70 CO=10µF 60 50 40 0.7 0.2 0.4 0.6 0.8 Output Current, IOUT (A) 30 10 1.0 100 1K 10K Frequency (Hz) 100K 1M Short Circuit Current (A) 0 Adjust Pin Current (µA) 0.6 Ripple Rejection 90 Ripple Rejection (dB) Dropout Voltage, VD (V) 1.3 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 10 of 12 QW-R102-042.D LD2117/A LINEAR INTEGRATED CIRCUIT TYPICAL CHARACTERISTICS(Cont.) Load Regulation 0.5 ΔILOAD=1A 0.7 0.6 0.5 0.4 0.3 0.4 0.35 0.3 0.25 0.2 0.2 0.1 -50 -25 0 25 50 75 Temperature (°C) 0.15 -50 -25 100 125 Output Voltage vs. Temperautre 5.15 1.25 5.1 1.225 VOUT=1.2V 1.2 1.175 1.15 0 25 50 75 Temperature (°C) 100 125 Output Voltage vs. Temperautre 1.275 Output Voltage (V) Output Voltage (V) Input Current vs. Temperature 0.5 Input Current (mA) Output Voltage Deveiation (%) 0.8 1.125 5.05 VOUT=5V 5.0 4.95 4.9 4.85 0 4.8 -50 -25 25 50 75 100 125150 Temperature (°C) 0 25 50 75 100 125150 Temperature (°C) Power (W) Reference Voltage (V) 1.1 -50 -25 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 11 of 12 QW-R102-042.D LD2117/A LINEAR INTEGRATED CIRCUIT UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 12 of 12 QW-R102-042.D