.100" LATCH HEADER .100" X .100" [2.54 X 2.54] CENTERLINE Adam Technologies, Inc. MHR SERIES INTRODUCTION: Adam Tech MHR Series .100" Latch Headers are dual row, PCB mounted, shrouded headers with latches for use with dual row IDC female socket connectors. In addition to providing a shock and vibration proof connection the locking latches also act as ejectors to remove the mating socket. Our low profile, space saving design has a center slot for the socket’s polarization bump. Adam Tech’s Latch Headers are available in Straight PCB Mount, Right Angle PCB and SMT Mounting. Plating options include choice of Gold, Tin or Selective Gold FEATURES: Integral Latches provide Shock and Vibration Proof connection Slot for IDC socket Polarization bump Straight PCB, Right Angle PCB and SMT versions Gold, Tin or Selective Gold plating Elevated option available Hi-Temp insulator available MATING SOCKETS: .100" X .100" Dual row IDC sockets SPECIFICATIONS: Material: Insulator: PBT, glass reinforeced, rated UL94V-0 Insulator Color: Black (Gray optional) Contacts: Brass Plating: U = Gold flash (30u” optional) over nickel underplate overall SG = Gold flash (30u” optional) over nickel on contact area, Tin over copper underplate on tails. T = Tin over copper underplate overall Electrical: Operating voltage: 250V AC max. Current rating: 3 Amps max Contact resistance: 20 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute Mechanical: Mating durability: 500 Cycles min. Temperature Rating: Operating temperature: -55°C to +105°C MHR 40 V SERIES INDICATOR MHR = .100" Shrouded Header with Latches POSITIONS 10, 14, 16, 20, 24, 26, 30, 34, 40, 50, 60, 64 MOUNTING ANGLE V = Straight Mount H = Right Angle Mount PACKAGING: Anti-ESD plastic trays SAFETY AGENCY APPROVALS: UL Recognized File No. E224053 CSA Certified File No. LR1578596 This series is availabe in an elevated version similar to our BHRE Series as shown on pgs. 260-261 Pb UL ® 262 ORDERING INFORMATION ® ® RoHS V E DCOMPLIANT 2002 / 95 / EC U A L LATCHING FEATURES S = Short latches (for sockets w/o strain relief) L = Long latches (for sockets w/strain relief) N = No latches PIN LENGTHS A = Standard length solder tail B = Special length, customer specified CONTACT PLATING U = Gold plated SG = Gold plating in contact area, Tin plated solder tails T = Tin plated OPTIONS: Add designator(s) to end of part number GY = Gray color insulator HT = High-temp insulator for high-temp soldering processes 909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM RoHS COMPLIANT