DP06S/D Series 6W DC/DC CONVERTER, DIP-Package, Wide 2:1 Input Range FEATURES Efficiency up to 86% DIP Package with Industry Standard Pinout Wide 2:1 Input Range Operating Temperature Range –40°C to +85°C Isolation Voltage 1500VDC Short Circuit Protection CSA60950-1 Safety Approval 3 Years Product Warranty The DP06S/D series are miniature, DIP Package, isolated 6W DC/DC converters with 1,500VDC isolation. It offers short circuit protection and allows a wide operating temperature range of –40°C to +85°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. Model List Model Number DP06S1203A DP06S1205A DP06S1212A DP06D1212A DP06D1215A DP06S2403A DP06S2405A DP06S2412A DP06D2412A DP06D2415A Input Voltage (Range) Output Voltage VDC VDC 3.3 5 12 ±12 ±15 3.3 5 12 ±12 ±15 12 (9 ~ 18) 24 (18 ~ 36) Output Current Input Current Max. Min. @Max. Load @No Load Reflected Ripple Current mA 1200 1000 500 ±250 ±200 1200 1000 500 ±250 ±200 mA 60 50 25 ±12.5 ±10 60 50 25 ±12.5 ±10 mA(typ.) 429 514 595 595 595 209 251 291 291 291 mA(typ.) mA(typ.) 20 25 Max. capacitive Load uF @Max. Load 6800 1000* 6800 5 Efficiency (typ.) 15 1000* % 77 81 84 84 84 79 83 86 86 86 * For each output Input Characteristics Parameter Input Surge Voltage (1 sec. max.) Start-Up Voltage Under Voltage Shutdown Model 12V Input Models Min. -0.7 Typ. --- Max. 25 24V Input Models -0.7 --- 50 12V Input Models 4.5 6 8 24V Input Models 8 12 16 12V Input Models --- --- 8 24V Input Models --- --- 16 Unit VDC Reverse Polarity Input Current --- --- 1 A Short Circuit Input Power --- 1000 3000 mW --- --- 2500 mW Internal Power Dissipation Conducted EMI (with suffix E only) DS_DP06S/D_07182012 All Models Compliance to EN 55022,class A and FCC part 15,class A E-mail: [email protected] http://www.delta.com.tw/dcdc P1 Output Characteristics Parameter Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation Ripple & Noise (20MHz) Ripple & Noise (20MHz) Ripple & Noise (20MHz) Transient Recovery Time Transient Response Deviation Temperature Coefficient Over Load Protection Short Circuit Protection Conditions Dual Output, Balanced Loads Vin=Min. to Max. Io=20% to 100% Over Line, Load & Temp. 25% Load Step Change Foldback Min. --------------------120 Typ. ±0.5 ±0.5 ±0.1 ±0.3 50 ----150 ±2 ±0.01 150 Continuous Max. ±1.0 ±2.0 ±0.3 ±1.0 75 100 15 300 ±6 ±0.02 --- Unit % % % % mV P-P mV P-P mV rms uS % %/℃ % General Characteristics Parameter Conditions Min. Typ. Max. Unit 60 Seconds 1500 --- --- VDC I/O Isolation Resistance 500 VDC 1000 --- --- MΩ I/O Isolation Capacitance 100KHz, 1V --- 380 500 pF --- 300 --- KHz 1,000,000 --- --- Hours I/O Isolation Voltage (rated) Switching Frequency MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign Safety Approvals UL/cUL 60950-1 recognition(CSA certificate), IEC/EN 60950-1(CB-scheme) Recommended Input Fuse 12V Input Models 24V Input Models 1500mA Slow-Blow Type 700mA Slow-Blow Type Environmental Characteristics Parameter Operating Temperature Range (with Derating) Conditions Min. Max. Unit Ambient -40 +85 ℃ ℃ Case Temperature --- +90 Storage Temperature Range -50 +125 ℃ Humidity (non condensing) --- 95 % rel. H 260 ℃ Cooling Lead Temperature (1.5mm from case for 10Sec.) DS_DP06S/D_07182012 Free-Air convection --- E-mail: [email protected] http://www.delta.com.tw/dcdc P2 Output Power (%) Power Derating Curve Notes 1 2 3 4 5 6 7 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100% Ripple & Noise measurement bandwidth is 0-20MHz. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. All DC/DC converters should be externally fused at the front end for protection. To order the converter with input filter meeting EN55022, Class A , add suffix E (e.g. Dp06s1203E) to order code. Specifications subject to change without notice. Mechancial Drawing 3 9 11 Bottom View 23 22 16 15.24 [0.60] 2.54 [0.10] 31.8 [1.25] Pin Connections Pin Single Output 2 -Vin Dual Output -Vin 3 -Vin -Vin Common 9 No Pin 11 NC -Vout 14 +Vout +Vout 16 -Vout Common 22 +Vin +Vin 23 +Vin +Vin NC: No Connection 14 5.08 4.5 [0.20][0.18] 2.54 [0.10] 2 20.3 [0.80] 0.50 [0.02] 15.22 [0.60] 4.1 [0.16] 10.2 [0.40] Mechanical Dimensions ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ►Pin diameter ⇔ 0.5 ±0.05 (0.02±0.002) Physical Outline ase Size : 31.8x20.3x10.2mm (1.25x0.80x0.40 Inches) Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Weight : 16.9g DS_DP06S/D_07182012 E-mail: [email protected] http://www.delta.com.tw/dcdc P3 Part Numbering System D P 06 S 12 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D- Dual WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_DP06S/D_07182012 E-mail: [email protected] http://www.delta.com.tw/dcdc P4