AND211YA Standard Bright LED Lamps Unit: mm Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 1.9(.075) Weight: 0.30 g 3.9(.154) AND211YA 1.0 Max 7(.276) Special Shape 1.9mm x 3.9mm Rectangular • Low power requirement • Special shape • All plastic molded lens • GaAsP – Yellow • RoHS Compliant 27(1.063) Min 0.5(0.2) Cathode 1.5(.06)Typ Features Optical Characteristics (T = 25°C) Color Part Number 2.54(0.1) AND211YA LED Lens Yellow Yellow Axial Luminous Test Intensity Condition (mcd) (IF–mA) Min. Typ. Lens Desc. Diffused 2.0 4.0 10 Viewing Angle 2θ1/2 (deg) 110 Absolute Maximum Ratings (TA = 25°C) Characteristics Symbol Rating Unit Forward Current IF 30 mA Reverse Voltage VR 5 V Power Dissipation PD 105 mW Operating Temperature TOpr -40 to +85 °C Storage Temperature Range TStg -40 to +85 °C Electro-Optical Characteristics (TA = 25°C) Characteristics Symbol AND211YA (Yellow) Test Condition Unit Typ. Max. Forward Voltage VF IF = 20mA 2.1 2.5 V Reverse Current IR VR = 5V – 10 µA Peak Emission Wavelength λp IF = 20mA 590 – nm Spectral Line Half Width λ IF = 20mA 35 – nm Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07 AND211YA Standard Bright LED Lamps IF vs. VF IV vs. TC 50 TA = 25°C 30 Forward Current IF (mA) Relative Luminous Intensity IV 3 2 1 0.5 20 10 5 3 2 0.4 0.3 -20 0 20 40 60 Case Temperature TC (°C) 1 1.7 80 1.8 1.9 2.0 2.1 Forward Voltage VF (V) 2.3 IV vs. IF IV vs.TA 5 40 Relative Luminous Intensity IV Allowable Forward Current IF (mA) 2.2 30 20 10 0 0 20 40 60 80 100 2 1 0.5 0.2 0.1 1 Ambient Temperature TA (°C) 20 2 5 10 Forward Current IF (mA) 50 Relative Luminous Intensity vs. Wavelength 1.0 Relative Luminous Intensity TA = 25° 0.8 0.6 0.4 0.2 0 520 540 560 580 600 Wavelength (nm) 620 640 660 680 700 720 740 760 780 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 800 7/18/07