“N” Package “C” Package “T” Package RoHS OPB350 Dot Dot DIMENSIONS ARE IN: 1 2 [ MILLIMETERS] INCHES 4 3 Shorting Bar Position 3 2 1 Load Resistance ~27 KW ~9.6 KW ~2.5 KW J1—Pin # 6 .093 0.125” ±0.02 J-1 OCB100-MC24 Pin # Function Color 1 Vcc Red 2 Logic Out A Orange 3 Logic Out B Blue 4 Calibrate Green 5 Analog Out White 6 Ground Black AWG = 26 Length = 24” [610mm] R17 R10 5.6 V J1 - Pin 1 Blue R2 3 5 2 1 VDD GP4/AN3 GP3/MCLR U2 GP2/AN2 GP5/T1CKI GP0/AN0 GP1/AN1 R6 C1 D4 0.1µf Green LM324 4 6 D5 U1 J1 - Pin 4 Green Optical Device 7 Vss 8 470 R11 C4 R1 R3 D2 D3 0.1µf J1 - Pin 5 J1 - Pin 3 R13 R12 R14 470 U3 LM324 D1 U1 Red J1 - Pin 2 J1 J2 R5 1 C2 R4 LM324 2 3 Q1 U1 R8 0.1µf R16 R15 R9 C3 0.1µf R7 1 Vcc 2 Logic Out A 3 Logic Out B 4 Calibrate Calibrate/Reset-Clear 5 Analog Out 6 Ground J1 - Pin 6 J1 = JST connector S6B-ZR(LF)(SN) A B Calibrate/Reset-Clear Typical V(SAT) vs. Temperature Normalized IC(ON) vs Temperature Typical VSAT vs Temperature 0.09 Normalized IC(ON) vs Temperature 1.2 Normalized @ T=20°C 0.08 1.0 0.06 Relative IC(ON) VSAT (Volts) 0.07 0.05 0.04 0.03 0.02 0.6 0.4 0.2 0.01 Normalized @ IF = 5mA, ICE = 100uA 0.0 0.00 -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) Rise & Fall Time vs Load Resistance VR2 = 1.0 250 Fall 200 150 100 50 Rise 0 2 3 4 5 6 7 -20 0 20 40 60 Test Circuit (Rise & Fall Time) 300 1 -40 Temperature (°C) Temperature (°C) Rise & Fall Time vs. Load Resistance Rise & Fall Time (usec) 0.8 8 9 Load Resistance ((,000 Load Resistance ,000Ohms) Ohms) 10 80 100