Frontier GP30-01 3a general purpose plastic rectifier Datasheet

Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: (805) 522-9998
FAX: (805) 522-9989
E-mail: [email protected]
Web: http://www.frontierusa.com
3A GENERAL PURPOSE PLASTIC RECTIFIER
GP30-005 THRU GP30-10
FEATURES
z LOW COST
z UL 94V0 FLAME RETARDANT EPOXY MOLDING COMPOUND
z DIFFUSED JUNCTION
z HIGH SURGE CURRENT CAPABILITY
1.0(25.4)
MIN
.052(1.3)
.048(1.2)
.375(9.5)
.335(8.5)
MECHANICAL DATA
z CASE: TRANSFER MOLDED, DO201AD, DIMENSIONS
IN INCHES AND (MILLIMETERS)
z LEADS: SOLDERABLE PER MIL-STD-202, METHOD 208
z POLARITY: CATHODE INDICATED BY COLOR BAND
z WEIGHT: 1.2 GRAMS
.220(5.6)
.197(5.0)
1.0(25.4)
MIN
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED
SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20%
GP30
GP30
GP30
GP30
GP30
GP30
GP30
UNITS
RATINGS
SYMBOL
-005
-01
-02
-04
-06
-08
-10
MAXIMUM RECURRENT PEAK REVERSE VOLTAGE
VRRM
50
100
200
400
600
800
1000
V
MAXIMUM RMS VOLTAGE
VRMS
35
70
140
280
420
560
700
V
MAXIMUM DC BLOCKING VOLTAGE
VDC
50
100
200
400
600
800
1000
V
MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT
IO
3.0
A
0.375”(9.5mm) LEAD LENGTH AT TA=55°C
PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF
IFSM
200
A
SINE-WAVE SUPERIMPOSED ON RATED LOAD
TYPICAL JUNCTION CAPACITANCE (NOTE 1)
CJ
30
PF
TYPICAL THERMAL RESISTANCE (NOTE 2)
20
℃/W
R
θja
OPERATING TEMPERATURE RANGE
TOP
ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED)
GP30
CHARACTERISTICS
SYMBOL
-005
MAXIMUM FORWARD VOLTAGE AT IO DC
VF
IR
MAXIMUM REVERSE CURRENT AT 25℃
MAXIMUM REVERSE CURRENT AT 100℃
NOTE:
IR
℃
-55 TO + 175
GP30
-01
GP30
-02
GP30
-04
1.1
5
GP30
-06
GP30
-08
UNITS
V
μA
μA
50
1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS
2. BOTH LEADS ATTACHED TO HEAT SINK 63.5x63.5x1t(mm) COPPER PLATE AT LEAD LENGTH 5mm
GP30-005 THRU GP30-10
GP30
-10
Page: 1
RATINGS AND CHARACTERISTIC CURVE GP30-005 THRU GP30-10
Fig. 1-MAXIMUM CURRENT RATING
EFFECT OF COPPER AREA.
RESISTIVE/INDUCTIVE LOAD.
FORWARD SURGE CURRENT
AMPERES PK (HALF SINE-WAVE)
5cm
2.0
With 63.5mm□ x 1.0
CU
NO HEAT SINK
1.0
0
20 40
200
100
50
10
1
60 80 100 120 140 160 180 200
10
NO OF CYCLES AT 60 HZ
100
TA-AMBIENT TEMPERATURE (OC)
Fig. 4-TYPICAL JUNCTION CAPACITANCE
100
Cj-JUNCTION CAPACITANCE
Io-AVERAGE RECTIFIED
CURRENT (A)
Fig. 3-MAXIMUM CURRENT RATING
EFFECT OF COPPER AREA.
RESISTIVE/INDUCTIVE LOAD.
L=20mm
3.0
2.4
L=10mm
1.8
L=5mm
L
1.2
0.6
With 20mm□ ×1.0 CU
50
10
1
1
0
20 40
60 80 100 120 140 160 180 200
5
10
50 100
VR-REVERSE VOLTAGE (V)
TA-AMBIENT TEMPERATURE (OC)
Fig. 6-FORWARD PULSE CURRENT, PULSE
Fig. 5-TYPICAL FORWARD CHARACTERISTICS
100
10,000
IP-PULSE CURRENT (A)
IF-FORWARD CURRENT (A)
Io-AVERAGE RECTIFIED
CURRENT (A)
3.0
Fig. 2-MAXIMUM FORWARD SURGE
NUMBER OF CYCLES
30
10
3
1
0.3
1,000
100
10
0.1
0.6
0.8
1.0
1.2
1.4
1.6
VF-FORWARD VOLTAGE (V)
GP30-005 THRU GP30-10
1.8
2.0
.1uS
1uS
10uS
100uS
1mS
PULSE DURATION (SECONDS)
Page: 2
10mS
Similar pages