BYX82, BYX83, BYX84, BYX85, BYX86 www.vishay.com Vishay Semiconductors Standard Avalanche Sinterglass Diode FEATURES • Glass passivated junction • Hermetically sealed package • Low reverse current • High surge current loading • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 949539 APPLICATIONS MECHANICAL DATA • Rectification, general purpose Case: SOD-57 Terminals: plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: color band denotes cathode end Mounting position: any Weight: approx. 369 mg ORDERING INFORMATION (Example) DEVICE NAME ORDERING CODE TAPED UNITS MINIMUM ORDER QUANTITY BYX86 BYX86TR 5000 per 10" tape and reel 25 000 BYX86 BYX86TAP 5000 per ammopack 25 000 PARTS TABLE PART TYPE DIFFERENTIATION PACKAGE BYX82 VR = 200 V; IF(AV) = 2 A SOD-57 BYX83 VR = 400 V; IF(AV) = 2 A SOD-57 BYX84 VR = 600 V; IF(AV) = 2 A SOD-57 BYX85 VR = 800 V; IF(AV) = 2 A SOD-57 BYX86 VR = 1000 V; IF(AV) = 2 A SOD-57 ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Reverse voltage = repetitive peak reverse voltage Peak forward surge current TEST CONDITION See electrical characteristics tp = 10 ms, half sine wave Repetitive peak forward current Average forward current i2t-rating Junction and storage temperature range Rev. 1.7, 11-Sep-12 Tamb 45 °C PART SYMBOL VALUE UNIT BYX82 VR = VRRM 200 V BYX83 VR = VRRM 400 V BYX84 VR = VRRM 600 V BYX85 VR = VRRM 800 V BYX86 VR = VRRM 1000 V A IFSM 50 IFRM 10 A IF(AV) 2 A i2 t 8 A2s Tj = Tstg - 55 to + 175 °C Document Number: 86052 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYX82, BYX83, BYX84, BYX85, BYX86 www.vishay.com Vishay Semiconductors MAXIMUM THERMAL RESISTANCE (Tamb = 25 °C, unless otherwise specified) PARAMETER Junction ambient TEST CONDITION SYMBOL VALUE UNIT Lead length l = 10 mm, TL = constant RthJA 45 K/W On PC board with spacing 25 mm RthJA 100 K/W ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. IF = 1 A VF - 0.9 1 V VR = VRRM IR - 0.1 1 μA VR = VRRM, Tj = 100 °C IR - 10 25 μA VR = 4 V, f = 1 MHz CD - 20 - pF IF = 0.5 A, IR = 1 A, iR = 0.25 A trr - 2 4 μs IF = IR = 1 A, dI/dt = 5 A/μs Qrr - 3 6 μC Forward voltage Reverse current Diode capacitance Reverse recovery time Reverse recovery charge UNIT 10 120 l l 100 IF – Forward Current (A ) RthJA –Therm. Resist. Junction/ Ambient ( K/W) TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 80 TL= constant 60 40 Tj = 25°C 0.1 20 Scattering Limits 0.01 0 0 5 10 15 20 25 30 l – Lead Length ( mm ) 94 9572 0 RthJA ≤ 100 K/W V RRM 160 VR 120 80 40 0 94 9579 BYX 82 BYX 84 BYX 83 BYX 85 BYX 86 1600 0 400 800 1200 Reverse / Repetitive Peak Reverse Voltage ( V ) Fig. 2 - Junction Temperature vs. Reverse/Repetitive Peak Reverse Voltage Rev. 1.7, 11-Sep-12 1.8 2.4 3.0 30 CD – Diode Capacitance ( pF ) 200 RthJA ≤ 35 K/W 1.2 Fig. 3 - Forward Current vs. Forward Voltage 240 RthJA ≤ 57 K/W 0.6 V F – Forward Voltage ( V ) 94 9573 Fig. 1 - Max. Thermal Resistance vs. Lead Length Tj – Junction Temperature ( °C ) Tj = 175°C 1 24 18 12 6 f = 1 MHz Tj = 25°C 0 0.1 94 9574 1 10 100 V R – Reverse Voltage ( V ) Fig. 4 - Typ. Diode Capacitance vs. Reverse Voltage Document Number: 86052 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYX82, BYX83, BYX84, BYX85, BYX86 Zthp–Thermal Resistance for PulseCond.(K/W) www.vishay.com Vishay Semiconductors 1000 V RRM ≤ 200 V RthJA ≤ 100 K/W 100 tp/T = 0.5 10 tp/T = 0.2 tp/T = 0.1 tp/T = 0.05 Tamb = 25°C Tamb =100 °C Tamb = 45 °C Tamb = 125 °C 0.02 Tamb = 70°C Tamb = 150 °C 0.01 Single Pulse 1 10–3 10–2 10–1 100 10 0 101 tp – Pulse Length ( s ) 94 9575 101 102 I FRM – Repetitive Peak Forward Current ( A ) Zthp– Thermal Resistance for PulseCond.(K/W) Fig. 5 - Thermal Response 1000 V RRM ≤ 1000 V t ≤ 10 μs RthJA ≤ 100 K/W 100 tp/T = 0.5 Tamb = 45°C tp/T = 0.2 tp/T = 0.1 tp/T = 0.05 10 Tamb = 25°C Tamb = 60°C Tamb = 70°C 0.02 Tamb =100°C 0.01 1 10–3 Single Pulse 10–2 10–1 100 101 10–1 tp – Pulse Length ( s ) 94 9578 100 101 I FRM – Repetitive Peak Forward Current ( A ) Zthp– Thermal Resistance for Pulse Cond.(K/W) Fig. 6 - Thermal Response 1000 V RRM ≤ 200 V RthJA ≤ 57 K/W 100 Tamb = 25°C tp/T = 0.5 10 1 10–4 94 9577 tp/T = 0.2 tp/T = 0.1 tp/T = 0.05 tp/T = 0.02 tp/T = 0.01 10–3 Tamb = 70°C Tamb = 100°C Tamb = 125°C Tamb = 150°C Tamb = 45°C Single Pulse 10–2 10–1 100 tp – Pulse Length ( s ) 100 101 I FRM – Repetitive Peak Forward Current ( A ) Fig. 7 - Thermal Response Rev. 1.7, 11-Sep-12 Document Number: 86052 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYX82, BYX83, BYX84, BYX85, BYX86 Zthp–Thermal Resistance for Pulse Cond.(K/W) www.vishay.com Vishay Semiconductors 1000 V RRM ≤ 1000 V t ≤ 10 μs RthJA ≤ 57 K/W 100 tp/T = 0.5 10 Tamb = 25 °C tp/T = 0.2 tp/T = 0.1 tp/T = 0.05 100°C Tamb = 45 °C 70°C tp/T = 0.02 tp/T = 0.01 1 10–4 10–3 Single Pulse 10–2 Tamb = 125°C 10–1 100 tp – Pulse Length ( s ) 94 9576 100 101 I FRM – Repetitive Peak Forward Current ( A ) Fig. 8 - Thermal Response 3.6 (0.142) max. 0.82 (0.032) max. PACKAGE DIMENSIONS in millimeters (inches): SOD-57 26 (1.024) min. 4 (0.157) max. 26 (1.024) min. 20543 Rev. 1.7, 11-Sep-12 Document Number: 86052 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BYX82TR BYX83TR BYX84TR BYX85TR BYX86TR BYX82TAP BYX83TAP BYX84TAP BYX85TAP BYX86TAP