Diodes AH1801 Micropower, ultra-sensitive hall effect Datasheet

AH1801
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
General Description
Features
•
•
•
•
•
•
•
•
•
•
•
Micropower operation
Operation with North or South Pole
2.5V to 5.5V battery operation
Inverted Output-on without Magnet present
Chopper stabilized
• Superior temperature stability
• Extremely Low Switch-Point Drift
• Insensitive to Physical Stress
Good RF noise immunity
-40°C to 85°C operating temperature
Low profile 3 pin SC59 (commonly known as SOT23 in
Asia) and DFN2020-3, DFN2020-6 package
ESD (HBM) > 5KV for DFN2020-3 and DFN2020-6
> 6KV for SC59
SC59, DFN2020-3 and DFN2020-6: Available in
“Green” Molding Compound (No Br, Sb)
Lead Free Finish / RoHS Compliant (Note 1)
AH1801 is a Micropower, Ultra-sensitive Hall Effect Switch, which
is with two Hall effect plates and a output driver, mainly designed
for battery–operation, hand-held equipment (such as Cellular and
Cordless Phone, PDA). The total operation power is down to
24uW in the 3V supply.
Either north or south pole of sufficient strength will turn the output
off. The output will be turned on under no magnetic field.
While the magnetic flux density (B) is larger than operate point
(Bop), the output will be turned off, the output is held until B is
lower than release point (Brp), then turned on.
Applications
•
•
•
Cellular phone
PDA
Cordless phone
Ordering Information
AH1801 - XX G - 7
Device
AH1801-WG-7
AH1801-FJG-7
AH1801-SNG-7
Notes:
Package
Green
Packing
W : SC59
FJ : DFN2020-3
SN : DFN2020-6
G : Green
7 : Tape & Reel
Package
Code
W
FJ
SN
Packaging
(Note 2)
SC59
DFN2020-3
DFN2020-6
7” Tape and Reel
Quantity
Part Number Suffix
3000/Tape & Reel
-7
3000/Tape & Reel
-7
3000/Tape & Reel
-7
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html.
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AH1801 Rev. 7
1 of 10
www.diodes.com
FEBRUARY 2009
© Diodes Incorporated
AH1801
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Pin Assignment
(1) SC59
(2) DFN2020-3
( Top View )
( Top View )
3. GND
2. Output
GND 3.
1. Vdd
1. Vdd
3. Output
(3) DFN2020-6
( Top View )
Notes:
6. NC
5. GND
1. Vdd
2. NC
4. NC
3. Output
3. NC is “No Connection”, which is recommended to be tied to ground.
Pin Descriptions
Pin Name
Vdd
GND
Output
NC
AH1801 Rev. 7
P/I/O
P/I
P/I
O
Description
Power Supply Input
Ground
Output Pin
No Connected
2 of 10
www.diodes.com
FEBRUARY 2009
© Diodes Incorporated
AH1801
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Block Diagram
Vdd
1
Power
switch
Offset
Cancelling
Hall Plate
Output
Latch
Amp
3
Logical
GND
2
Offset
Cancelling
Hall Plate
Amp
Latch
Typical Circuit
2.5~5.5V
RL
C
AH1801
Output
GND
Notes:
4. C is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF~100nF.
RL is the pull-up resistor, the recommended resistance is 10KΩ~100KΩ.
AH1801 Rev. 7
3 of 10
www.diodes.com
FEBRUARY 2009
© Diodes Incorporated
AH1801
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Absolute Maximum Ratings
Symbol
Vdd
B
Ts
Characteristics
Supply voltage
Magnetic flux density
Storage Temperature Range
PD
TJ
(at TA = 25°C)
Values
7
Unlimited
-65 to +150
SC59
DFN2020-3
DFN2020-6
Package Power Dissipation
Maximum Junction Temp
Recommended Operating Conditions
Symbol
Vdd
TA
Parameter
AH1801 Rev. 7
°C
230
mW
150
°C
Rating
Unit
2.5~5.5
-40 to +85
V
°C
(TA = 25°C)
Conditions
Supply Voltage
Operating Temperature Range
Unit
V
Operating
Operating
4 of 10
www.diodes.com
FEBRUARY 2009
© Diodes Incorporated
AH1801
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Electrical Characteristics
Symbol
Vout
Ioff
Characteristic
Output On Voltage
Output Leakage Current
Idd(en)
Idd(dis)
Supply Current
Idd(avg)
Tawake
Tperiod
D.C.
Notes:
(TA = +25°C, Vdd = 3V; unless otherwise specified)
Awake Time
Period
Duty Cycle
Conditions
Iout = 1mA
Vout = 5.5V, Output off
Chip enable, TA = 25°C, Vdd = 3V
Chip enable, TA = -40~85°C,
Vdd = 2.5~5.5V
Chip disable, TA = 25°C, Vdd = 3V
Chip disable, TA = -40~85°C,
Vdd = 2.5~5.5V
Average supply current,
TA = 25°C, Vdd = 3V
Average supply current,
TA = -40~85°C, Vdd = 2.5~5.5V
(Note 5)
(Note 5)
Min
Typ
Max
Unit
-
0.1
<0.1
3
0.3
1
6
V
µA
mA
-
3
9
mA
-
5
10
µA
-
5
18
µA
-
8
16
µA
-
8
27
µA
-
75
75
0.1
150
150
-
µs
ms
%
5. When power is initially on, the operating Vdd (2.5V to 5.5V) must be applied to be guaranteed for the output sampling. The output state is
valid after the second operating phase (typical 150ms).
Tperiod
Tawake
Idd(en)
Sample and output
latched
Idd (dis)
0
AH1801 Rev. 7
5 of 10
www.diodes.com
FEBRUARY 2009
© Diodes Incorporated
AH1801
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Magnetic Characteristics
Symbol
Characteristic
Bops(south pole to brand side)
Bopn(north pole to brand side)
Brps(south pole to brand side)
Brpn(north pole to brand side)
Bhy( Bopx − Brpx )
Notes:
(TA = 25°C, Vdd = 3V)
Operate Point
Release Point
Min
Typ
(1mT=10 Gauss)
Max
Unit
-60
10
-
40
-40
30
-30
60
-10
-
10
-
Hysteresis
Gauss
6. Typical data is at TA=25 °C, Vdd=3V, and for design information only.
7. Operate point and release point will vary with supply voltage and operating temperature.
Output ( Voltage )
( off-state )
Turn off
Turn Turn
on on
Turn off
( on-state )
-B
Brps Bops
Bopn Brpn
+B
Magnetic
Performance Characteristics
(1) SC59 / DFN2020-3 /DFN2020-6
TA (°C)
25
50
60
70
80
85
90
100
110
120
130
140
150
PD (mW)
230
184
166
147
129
120
110
92
74
55
37
18
0
P D (m W )
P o w e r D is s ip a tio n C u rv e
300
200
100
0
0
25
50
75
85
100
125
150
T A (。 C )
AH1801 Rev. 7
6 of 10
www.diodes.com
FEBRUARY 2009
© Diodes Incorporated
AH1801
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Marking Information
(1) SC59
( Top View )
XX Y W X
Part Number
AH1801
XX : Identification code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Green
Package
SC59
Identification Code
KB
(2) DFN2020-3
( Top View )
Pin 1 indicator
XX : Identification Code
Y : Year : 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Green
XX
YWX
Part Number
AH1801
Package Identification Code
DFN2020-3
K1
(3) DFN2020-6
( Top View )
Pin 1 indicator
XX : Identification Code
Y : Year : 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Green
XX
YWX
Part Number
AH1801
AH1801 Rev. 7
Package Identification Code
DFN2020-6
KB
7 of 10
www.diodes.com
FEBRUARY 2009
© Diodes Incorporated
AH1801
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Package Information
(All Dimensions in mm)
(1) SC59 (commonly known as SOT23 in Asia)
TOP VIEW
1.50/
1.70
0.35/0.50
2.70/
3.00
1.90
2.90/3.10
1.00/
1.30
0.013/0.10
0.10/0.20
0.95
0.35/0.55
0°/8°
0.13Max.
0.57/0.63
Typ 0.60
(2) DFN2020-3
0.10 C
Seating plane
C
0.35/0.45
Sensor location
R0
.2
C
L
0.25 B
0.10M C A B
0.2/0.3
1.1/1.3
0.325(Ref.)
A
Bottom View
2x
0.25 A
1.95/2.075
0.138(Ref.)
2x-
C
L
0.5Typ
0.8/1.0
1.95/2.075
B
0/0.05
0.08 C
AH1801 Rev. 7
8 of 10
www.diodes.com
FEBRUARY 2009
© Diodes Incorporated
AH1801
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Package Information
(Continued)
0.43mon.
0.57/0.63
(3) DFN2020-6
Marking
0.05 C
0/0.05
0.15max.
0.15 C
0.08 C
2x
Pin#1 ID
1.95/2.075
A
Sensor location
0.30/0.40
1.45/1.65
R0
2x-
Seating plane
C
0.76/0.96
1.95/2.075
B
(Active area depth)
.1
0.15 C
0.65nom.
0.2/0.3
0.05 M C A B
Bottom View
AH1801 Rev. 7
9 of 10
www.diodes.com
FEBRUARY 2009
© Diodes Incorporated
AH1801
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Taping Orientation
(1) DFN2020-3 and DFN2020-6
Notes:
8. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf.
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
AH1801 Rev. 7
10 of 10
www.diodes.com
FEBRUARY 2009
© Diodes Incorporated
Similar pages