BAS81, BAS82, BAS83 www.vishay.com Vishay Semiconductors Small Signal Schottky Diodes FEATURES • Integrated discharge protection ring against static • Low capacitance • Low leakage current • Low forward voltage drop • Very low switching time • AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA APPLICATIONS Case: MiniMELF SOD-80 • HF-detector Weight: approx. 31 mg • Protection circuit Cathode band color: black • Diode for low currents with a low supply voltage Packaging codes/options: • Small battery charger GS18/10K per 13" reel (8 mm tape), 10K/box • Power supplies GS08/2.5K per 7" reel (8 mm tape), 12.5K/box • DC/DC converter for notebooks PARTS TABLE PART TYPE DIFFERENTATION ORDERING CODE INTERNAL CONSTRUCTION REMARKS BAS81 VR = 40 V BAS81-GS18 or BAS81-GS08 Single diode Tape and reel BAS82 VR = 50 V BAS82-GS18 or BAS82-GS08 Single diode Tape and reel BAS83 VR = 60 V BAS83-GS18 or BAS83-GS08 Single diode Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Reverse voltage Peak forward surge current PART SYMBOL VALUE UNIT BAS81 VR 40 V BAS82 VR 50 V BAS83 VR 60 V IFSM 500 mA IFRM 150 mA IF 30 mA tp = 1 s Repetitive peak forward current Forward continuous current THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Thermal resistance junction to ambient air Junction temperature Storage temperature range Rev. 1.9, 16-May-12 TEST CONDITION SYMBOL VALUE UNIT On PC board 50 mm x 50 mm x 1.6 mm RthJA 320 K/W Tj 125 °C Tstg - 65 to + 150 °C Document Number: 85509 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS81, BAS82, BAS83 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION MIN. TYP. MAX. UNIT IF = 0.1 mA VF 330 mV IF = 1 mA VF 410 mV IF = 15 mA VF 1000 mV VR = VRmax. IR 200 nA VR = 1 V, f = 1 MHz CD 1.6 pF Forward voltage Reserve current Diode capacitance SYMBOL TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PR - Reverse Power Dissipation (mW) 14 1000 VR = 60 V I F - Forward Current (mA) 12 RthJA = 540 K/W 10 8 6 Limit at PPRR - Limit at100 100%%VRVR 4 PR - Limit at 80 % VR 100 Tj = 125 °C 10 Tj = 25 °C 1 0.1 2 0.01 0 25 50 75 100 125 Tj - Junction Temperature (°C) 15794 0 150 1 1.5 2.0 V F - Forward Voltage (V) 15796 Fig. 3 - Forward Current vs. Forward Voltage Fig. 1 - Max. Reverse Power Dissipation vs. Junction Temperature 1000 2.0 CD - Diode Capacitance (pF) V R = V RRM I R - Reverse Current (µA) 0.5 100 10 1 f = 1 MHz 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.1 25 15795 0 50 75 100 125 Tj - Junction Temperature (°C) Fig. 2 - Reverse Current vs. Junction Temperature Rev. 1.9, 16-May-12 0.1 150 15797 1 10 100 VR - Reverse Voltage (V) Fig. 4 - Diode Capacitance vs. Reverse Voltage Document Number: 85509 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS81, BAS82, BAS83 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): MiniMELF SOD-80 1.6 (0.063) 1.4 (0.055) Cathode indification * 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) * The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 1.25 (0.49) min. 2 (0.079) min. 2.5 (0.098) max. 5 (0.197) ref. Document no.:6.560-5005.01-4 Rev. 8 - Date: 07.June.2006 96 12070 Rev. 1.9, 16-May-12 Document Number: 85509 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BAS81-GS18 BAS82-GS08 BAS82-GS18 BAS83-GS08 BAS83-GS18 BAS81-GS08