-100mA/-50V Digital transistors(with built-in resistors) DTA043EM / DTA043EEB / DTA043EUB Dimensions (Unit : mm) Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors. (See equivalent circuit) 2) The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. 3) Only the on/off conditions need to be set for operation, making the device design easy. VMT3 Abbreviated symbol : 37 EMT3F (3) (1) Structure PNP epitaxial planar silicon transistor (Resistor built-in type) (2) Abbreviated symbol : 37 UMT3F 0.53 0.9 (1) 0.65 0.65 1.3 0.53 0.425 Applications Inverter, Interface, Driver 2.0 (3) 1.25 2.1 0.425 0.32 (2) 0.13 Abbreviated symbol : 37 Packaging specifications Package Packaging Type Type Code Basic ordering unit (pieces) DTA043EM DTA043EEB DTA043EUB Equivalent circuit VMT3 Taping T2L EMT3F Taping TL UMT3F Taping TL 8000 3000 3000 ○ - ○ - ○ OUT OUT R R11 ININ RR22 GND(+) GND(+) OUT OUT ININ GND(+) GND(+) R1=R2=4.7k Absolute maximum (Ta=25℃) Parameter Symbol Supply voltage VCC Input voltage VIN Collector current *1 Output current Power dissipation *2 Junction temperature Range of storage temperature M Limits(DTA043E□) EB UB -50 -30 10 -100 -100 IC(max) IO PD Tj Tstg 150 200 150 -55 to +150 Unit V V V mA mA mW ℃ ℃ *1 Characteristics of built-in transistor *2 Each terminal mounted on a reference land www.rohm.com ©2011 ROHM Co., Ltd. All rights reserved. 1/2 2011.08 - Rev.A Data Sheet DTA043EM / DTA043EEB / DTA043EUB Electrical characteristics (Ta=25℃) Parameter Symbol Input voltage Output voltage Min. Typ. VI(off) - - -0.5 V VCC=-5V / IO=-100uA VI(on) -2.2 - - V VO=-0.3V / IO=-5mA VO(on) - -0.07 -0.15 V IO=-5mA / II=-0.5mA II - - -1.8 mA VI=-5V VCC=-50V / VI=0V Input current Max. Test Conditions Unit IO(off) - - -500 nA DC current gain GI 20 - - - VO=-10V / IO=-5mA Transition frequency * fT - 250 - MHz VCE=-10V /IE=5mA f=100MHz Input resistance R1 3.29 4.7 6.11 kΩ Resistance ratio R2/R1 0.8 1.0 1.2 - Output current * Characteristics of built-in transistor Electrical characteristics curves -10 -100 VCC=-5V OUTPUT CURRENT : IO (mA) INPUT VOLTAGE : VI(on) (V) VO=-0.3V Ta=-40ºC Ta=25ºC Ta=75ºC Ta=125ºC -10 -1 -0.1 -0.1 -1 Ta=125ºC Ta=75ºC Ta=25ºC Ta=-40ºC -0.1 -0.01 -0.001 -1 -10 -100 0 -0.5 -1.5 -2 -2.5 -3 INPUT VOLTAGE : V I(off) (V) Fig.1 Input Voltage vs. Output Current Fig.2 Input Voltage vs. Output Current (ON characteristics) (OFF characteristics) -1 1000 100 OUTPUT VOLTAGE : VO(on) (V) VO=-10V DC CURRENT GAIN : GI -1 OUTPUT CURRENT : IO (mA) Ta=125ºC Ta=75ºC Ta=25ºC Ta=-40ºC 10 1 -0.1 -1 -10 -0.1 Ta=125ºC Ta=75ºC Ta=25ºC Ta=-40ºC -0.01 -0.001 -0.1 -100 -1 -10 -100 OUTPUT CURRNET : IO (mA) OUTPUT CURRENT : IO (mA) Fig.3 DC Current Gain vs. Output Current www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. IO/II=10 Fig.4 Output Voltage vs. Output Current 2/2 2011.08 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. R1120A