Fox F536L Hcmos 5x3.2mm 3.3v smd oscillator Datasheet

HCMOS 5x3.2mm 3.3V SMD Oscillator
Model: F530L SERIES
RoHS Compliant / Pb Free
Rev. 5/7/2009
Page 1 of 2
http://www.foxonline.com/need_a_sample.htm
FEATURES
OPTIONS
• 3.3V Operation
• Standby Function
• Tape and Reel (1,000 pcs. STD)
• 5.0V (F550L) Version Available
• PART NUMBER SELECTION Learn More - Internet Required
Part Number
474-Frequency-xxxxx
475-Frequency-xxxxx
476-Frequency-xxxxx
550-Frequency-xxxxx
492-Frequency-xxxxx
636-Frequency-xxxxx
546-Frequency-xxxxx
Model
Number
F530L
F530LR
F535L
F535LR
F536L
F536LR
F538L
Frequency
Operating
Stability1 Temperature (ºC)
±100PPM
-10 ~ +70
±100PPM
-40 ~ +85
±50PPM
-10 ~ +70
±50PPM
-40 ~ +85
±25PPM
-10 ~ +70
±25PPM*
-40 ~ +85
±20PPM*
-10 ~ +70
5.0 ± 0.2
Frequency
Range (MHz)
1.544 ~ 155.520
1.544 ~ 155.520
1.544 ~ 155.520
1.544 ~ 155.520
1.544 ~ 155.520
1.544 ~ 155.520
1.544 ~ 77.760
#4
#3
Top
View
Dot denotes
pin 1
3.2 ± 0.2
#2
#1
• ELECTRICAL CHARACTERISTICS
1.3 Max
MAX (unless otherwise noted)
PARAMETERS
Frequency Range (FO)
Storage Temperature Range (TSTG)
Supply Voltage
(VDD)
Input Current
(IDD)
1.544 ~ 32.000 MHz
32.000+ ~ 50.000 MHz
50.000+ ~ 67.000 MHz
67.000+ ~ 155.520 MHz
Output Symmetry (50% VDD)
Rise Time (10% ~ 90% VDD) (TR)
Fall Time (90% ~ 10% VDD) (TF)
Output Voltage
(VOL)
(VOH)
Output Current
(IOL)
(IOH)
Output Load
(HCMOS)
Standby Current
Start-up Time
(TS)
Output Disable Time 2
Output Enable Time 2
Reflow Soldering Temp
Moisture Sensitivity Level (MSL)
Termination Finish
1.544 ~ 155.520 MHz
-55ºC ~ +125ºC
3.3V ± 10%
2.54±0.1
#1
#2
#4
#3
Bottom
View
15mA
20mA
25mA
40mA
40% ~ 60%
7nS
7nS
10% VDD
90% VDD Min
2mA Min
-2mA Min
15pF
10µA
10mS
150nS
10mS
260ºC / 10 Seconds
1
Au
1.0
1.2
Recommended
Solder Pad Layout
2.54
1.29
2.25
1.24
1
Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging,
shock, and vibration. *Excludes Shock/Vibration
2
An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open.
Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 4) and GND (Pin 2) to
minimize power supply line noise.
Drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may
vary. All specifications subject to change without notice.
Pin Connections
#1 E/D
#2 GND
#3 Output
#4 V DD
• Enable / Disable Function
INH (Pin 1)
OUTPUT (Pin 3)
OPEN 2
ACTIVE
'1' Level VIH ≥ 70% VDD
ACTIVE
'0' Level VIL ≤ 30% VDD
High Z
FOXElectronics
5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 http://www.foxonline.com
EMEA Tel/Fax: +44 .1767.312632 | Asia Hong Kong Tel: +852.2854.4285 Fax +852.2854.4282 | Japan Tel: +81.3.3374/2079 Fax: +81.3.3374.5221
© 2009 FOX ELECTRONICS | ISO9001:2000 Certified
HCMOS 5x3.2mm 3.3V SMD Oscillator
Model: F530L SERIES
RoHS Compliant / Pb Free
Page 2 of 2
Rev. 5/7/2009
http://www.foxonline.com/need_a_sample.htm
• TAPE SPECIFICATIONS (millimeters)
MODEL
A
F530L Series ∅1.5
FOXElectronics
• REEL SPECIFICATIONS (millimeters)
G
I
J
K
L M
H
B
C D
E
F STD Reel QTY MODEL
F530L Series 2.0 ∅13 ∅21 ∅62 ∅180 13.5 2.0
4.0 8.0 5.5 12.0 1.5
1,000
5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 http://www.foxonline.com
EMEA Tel/Fax: +44 .1767.312632 | Asia Hong Kong Tel: +852.2854.4285 Fax +852.2854.4282 | Japan Tel: +81.3.3374/2079 Fax: +81.3.3374.5221
© 2009 FOX ELECTRONICS | ISO9001:2000 Certified
35
Similar pages