J123F RoHS Compliant E197852 19.5 x 16.1 x 17.1 mm Features ures • • • • UL F class rated standard Small size and light weight Capable of handling 1000W lamp loads Designed to withstand high inrush loads (100A) Contact Data* Contact Arrangement 1A = SPST N.O. Contact Rating Contact Resistance < 50 milliohms initial 1C = SPDT Contact Material AgSnO2In2O3 20A @ 125VAC Maximum Switching Power 500W, 4500VA 16A @ 277VAC Maximum Switching Voltage 380VAC, 110VDC 10A @ 250VAC, General Purpose, 20k cycles 85°C Maximum Switching Current 20A TV-8, 120VAC 1hp @ 125/250 N.O. 1/2hp @ 125/250 N.C. Coil Data* Coil Voltage VDC Coil Resistance Ω +/- 10% .36W .45W Pick Up Voltage VDC (max) Release Voltage VDC (min) 75% of rated voltage 10% of rated voltage Rated Max 5 6.5 70 56 3.75 .05 6 7.8 100 80 4.50 .06 9 11.7 225 180 6.75 .09 12 15.6 400 320 9.00 1.2 24 31.2 1600 1280 18.00 2.4 48 62.4 6400 5120 36.00 4.8 Coil Power W Operate Time ms Releast Time ms .36 .45 10 5 General Data* Electrical Life @ rated load 100K cycles, average Mechanical Life 10M cycles, average Insulation Resistance 100M Ω min. @ 500VDC initial Dielectric Strength, Coil to Contact 2500V rms min. @ sea level initial Contact to Contact * Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. 1500V rms min. @ sea level initial Shock Resistance 100m/s2 for 11 ms Vibration Resistance 1.50mm double amplitude 10~40Hz Terminal (Copper Alloy) Strength 10N Operating Temperature -55oC to +125oC Storage Temperature -55oC to +155oC Solderability 260oC for 5 s Weight 10g www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 1 Specifications and availability subject to change without notice. J123 Ordering Information 1. Series J123F 1C 12VDC .36 J123F 2. Contact Arrangement 1A = SPST N.O. 1C = SPDT 3. Coil Voltage 5VDC 6VDC 9VDC 12VDC 24VDC 48VDC 4. Coil Power .36 = .36W .45 = .45W 5. Sealing Option Blank = Sealed (standard) Dimensions Units = mm Schematics & PC Layouts Bottom Views 1A page 2 1C www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 Specifications and availability subject to change without notice.