Detector Switches/ESE58 09HL Detector Switches Type: ESE58 ■ Features ■ Recommended Applications ● Thin body: 0.9 mm. ● Circuit type: Normally-open and normally-closed ● Detection of media in portable electronic equipment (Mobile phones/Digital still cameras/DVCs, etc.) types are available. ● Lineup with variations in right-left operations. ■ Explanation of Part Numbers 1 2 3 4 5 E S E 5 8 6 8 9 Design No Product Code 6th L R 7 Type Left-side operation type Right-side operation type ■ Specifications Rating 50 µA 3 Vdc to 10 mA 5 Vdc (Resistive load) Contact Resistance 500 m액 max. (Initial) Insulation Resistance 100 M액 min. (100 Vdc) Dielectric Withstanding Voltage 100 Vac for 1 minute Operating Force 300 mN max. Mounting Height 0.9 mm Poles and Throws 1-pole 1-throw With boss : 1.4 mm (1.5 mm) Without boss : 2.1 mm (1.5 mm) Full Travel (Pushing distance) Operating Life 50000 cycles min. Temperature Range –10 °C to +60 °C Heat Resistance +70 °C for 96 hours Low Temperature Resistance –25 °C for 96 hours Humidity Resistance +40 °C 90 % to 95 % RH for 96 hours Minimum Quantity/Packing Unit 5000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 30000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES29 – 00 Sep. 2010 Detector Switches/ESE58 ■ Dimensions in mm (not to scale) 0.2 0.3 2.9 2.0 2.55±0.2 On position 2.8 4.5 PWB mounting hole for reference (Pitch tolerance: ±0.05) 0.2 0.9±0.1 0.45 0.8 0.9 0.6 1.6 2.9 2.6±0.2 2.0 Operation point (1) 3.0 3.5 Off position 0.45 0.3 (0.64) 0.9 0.4 0.77 0.38 0.44 Off position 0.24 Pivot center .14 .45 2–φ 0.7 0.5 R0 R2 2.8 4.5 PWB mounting hole for reference (Pitch tolerance: ±0.05) φ0.6±0.05 1.6±0.1 0.4 C0 .1 Nomal open type ESE58R11 J-bent terminals 1-pole 1-throw 0.2 0.5 with Boss ESE58R11B 0.9±0.1 Nomal closed type ESE58L61 J-bent terminals 1-pole 1-throw without Boss ESE58L61A No. 3 1.6 φ0.6±0.05 1.6±0.1 0.4 C0 .1 with Boss ESE58L61B Operation point 0.25 3.0 (1) 0.7 (0.64) 3.5 No. 2 0.77 0.38 0.48 On position 0.24 Pivot center .45 0.8 .14 R0 R2 2–φ 0.7 0.5 without Boss ESE58L11A Full stroke position 1.5 with Boss ESE58L11B Nomal open type ESE58L11 J-bent terminals 1-pole 1-throw Full stroke position 1.5 No. 1 0.4 C0 .1 0.8 0.3 2.9 2.55±0.2 0.9±0.1 On position 2.0 Operation point Full stroke position 1.5 3.5 1.6 2–φ 0.7 0.77 0.38 .45 R2 (1) 0.25 3.0 0.7 On position 0.48 0.24 Pivot center (0.64) R0 .1 4 without Boss ESE58R11A 2.8 4.5 PWB mounting hole for reference (Pitch tolerance: ±0.05) φ0.6±0.05 1.6±0.1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES30 – 00 Sep. 2010 Detector Switches/ESE58 ■ Dimensions in mm (not to scale) 0.2 0.4 C0 .1 0.9±0.1 0.6 0.45 0.8 0.9 2.9 2.0 Operation point Full stroke position 1.5 3.0 0.9 0.4 3.5 1.6 2–φ 0.7 0.77 0.38 5 .4 R2 0.45 0.3 (1) Off position 0.44 0.24 Pivot center (0.64) R0 .1 4 0.5 without Boss ESE58R61A 2.6±0.2 with Boss ESE58R61B Nomal closed type ESE58R61 J-bent terminals 1-pole 1-throw Off position No. 4 2.8 4.5 PWB mounting hole for reference (Pitch tolerance: ±0.05) φ0.6±0.05 1.6±0.1 ■ Circuit Diagram Normal open type 1-pole 1-throw (N . O) Type ESE58L Type ESE58R Common Terminal C Common Terminal 1 Normal closed type 1-pole 1-throw (N . C) Type ESE58L C 1 1 C Terminal Type ESE58R Common Terminal C 1 Common ■ Packaging Specifications Standard Reel Dimensions in mm (not to scale) Taping Reel φ380.0±2.0 Embossed Carrier Taping 16.4 P=8.0±0.1 4.0±0.1 2.0±0.1 Pilot holes Drawing direction TOP Leading portion 400 mm min. 7.5±0.1 1.75±0.1 13.5 16.0±0.3 .1 +0 0 .5 φ1 END Carrier tape Non-packed portion (160 mm min.) Packed portion Non-packed portion (100 mm min.) Cover tape Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES31 – 00 Sep. 2010