ＩＮＫ0002AＸ SERIES . High speed switching Silicon N-channel MOSFET OUTLINE DRAWING DESCRIPTION INK0002AT2 (PRELIMINARY) 2.1 0.3 ② 0.425 ③ 0.15 ① 1.25 0～0.1 0.5 0.9 ③ 0.65 1.2 0.8 2.0 1.3 ② 0.2 0.25 0.4 ① 0.4 FEATURE 0.425 0.65 0.8 0.2 ・Input impedance is high, and not necessary to consider a drive electric current. ・Vth is low, and drive by low voltage is possible. Vth=0.6～1.2V ・Low on Resistance. Ron=1.1Ω(TYP) ・High speed switching. ・Small package for easy mounting. INK0002AM1 0.7 INK0002AX is a Silicon N-channel MOSFET. This product is most suitable for low voltage use such as portable machinery , because of low voltage drive and low on resistance. Unit：mm APPLICATION high speed switching , Analog switching JEITA, JEDEC：－ ISAHAYA：T-USM JEITA：SC-70 JEDEC：－ TERMINAL CONNECTOR ①：GATE ②：SOURCE ③：DRAIN TERMINAL CONNECTOR ①：GATE ②：SOURCE ③：DRAIN INK0002AU1 INK0002AC1 1.6 EQUIVALENT CIRCUIT 0.4 0.8 2.5 0.4 0.5 1.5 0.5 ② 0.4 0.95 ③ ① 0.95 2.9 1.90 ② 0.3 0.5 ① 1.6 1.0 G 0.5 D ③ JEITA：SC-75A JEDEC：－ TERMINAL CONNECTOR ①：GATE ②：SOURCE ③：DRAIN ISAHAYA ELECTRONICS CORPORATION 0.16 0～0.1 0.8 1.1 0.15 0～0.1 0.55 0.7 S JEITA：SC-59 JEDEC：Similar to TO-236 T TERMINAL CONNECTOR ①：GATE ②：SOURCE ③：DRAIN ＩＮＫ0002AＸ SERIES High speed switching Silicon N-channel MOSFET MAXIMUM RATING（Ｔａ＝２５℃） SYMBOL PARAMETER ＶDSS ＶGSS Ｉ D Drain-source voltage Gate-source voltage Drain current Total power dissipation （Ta=25℃） Channel temperature Range of Storage temperature ＰＤ Ｔch Ｔｓｔｇ RATING INK0002AU1 INK0002AM1 30 ±8 200 INK0002AT2 125（※） 150 +125 -55～+125 ELECTRICAL CHARACTERISTICS（Ｔａ＝２５℃） 200 mW ℃ ℃ ※package mounted on 9mm×19mm×1mm glass-epoxy substrate. PARAMETER V(BR)DSS IGSS IDSS Vth | Yfs | Drain-source breakdown voltage I D=100μA, V Gate-source leak current V GS Zero gate voltage drain current V DS Gate threshold voltage I D=250μA, V Forward transfer admittance Static drain-source on-state resistance Input capacitance V V DS GS =0V,f=1MHz Output capacitance V DS=10V, V GS=0V,f=1MHz Switching time V V Ciss Coss tON tOFF V V mA +150 -55～+150 SYMBOL RDS(ON) UNIT INK0002AC1 TEST CONDITION =0V GS MIN 30 LIMIT TYP - MAX - - - ±0.5 μA =±5V, VDS=0V =30V ,VGS=0V UNIT V - - 50 μA 0.6 - 1.2 V - 300 - mS - 1.1 - Ω - 33 - pF - 6.8 - pF DD - 12 - GS - 80 - DS= V GS =10V, I D=0.1A DS I D=100mA, V =10V, V =4.0V GS =5V , I D =10mA =0～5V ns Switching time test condition test circuit OUT 5V 90% IN 5V RL 50Ω 0 10μs VDD=5V D.U.≦1% Common source Ta=25℃ input waveform 10% 0V VDD VDD 10% output waveform 90% VDS(ON） tf tr ton ISAHAYA ELECTRONICS CORPORATION toff Marketing division, Marketing planning department 6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan Keep safety first in your circuit designs! ·ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (1) placement of substitutive, auxiliary, (2) use of non-farmable material or (3) prevention against any malfunction or mishap. Notes regarding these materials ·These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to the customer’s application; they don't convey any license under any intellectual property rights, or any other rights, belonging ISAHAYA or third party. ·ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights , originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials. ·All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing product listed herein. ·ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact ISAHAYA electronics corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes , such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. ·The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials. ·If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. ·Please contact ISAHAYA Electronics Corporation or authorized ISAHAYA products distributor for further details on these materials or the products contained therein. Apr.2007 TYPICAL CHARACTERISTICS ID -VDS Ta=25℃ 100 1.6V 1 1.5V 1.0V 1.4V 0.8 Drain current ID (mA) 80 Drain current ID (mA) ID -VDS(Low voltage region) Ta=25℃ 1.3V 60 40 1.2V 20 0.95V 0.6 0.4 0.9V 0.2 1.1V 0.85V VGS=1.0V VGS=0.8V 0 0 0 2 4 6 8 0 10 0.1 0.2 0.3 4 5 1000 100 Ta=25℃ VDS=10V Ta=25℃ VGS=0V Drain current ID (mA) Drain reverse current IDR (mA) 0.5 ID -VGS IDR -VDS 10 100 10 1 1 -0 -0.5 -1 -1.5 0 -2 1 2 3 Gate-Source voltage VGS (V) Drain-Source voltage VDS (V) |Yfs| - ID VDS(ON) -ID 1000 1000 Ta=25℃ VDS=10V Ta=25℃ VGS=4V Drain-Source ON voltage VDS(ON) (mV) Forward transfer admittance |Yfs| (mS) 0.4 Drain-Source voltage VDS (V) Drain-Source voltage VDS (V) 100 10 100 10 1 1 1 10 100 1 1000 10 100 Drain current ID (mA) Drain current ID (mA) t - ID C - VDS 10000 100 Ta=25℃ toff Ciss tｆ Capacitance C (pF) Switching time t (ns) 1000 100 ton 10 10 Coss Ta=25℃ VGS=0V tr 1 1 0.1 1 10 Drain current ID (mA) 100 0.1 1 10 Drain-Source voltage VDS (V) ISAHAYA ELECTRONICS CORPORATION 100