Artesyn DCH3-050US-0002 Universal ac input Datasheet

POWER
DCH3 Series
3 Watts
Data Sheet
Total Power: 3 Watts
Input Voltage: 100 - 254 Vac
# of Outputs: Single
Special Features
ƒƒ USB Switching wallmount
power supply
ƒƒ Universal AC input
ƒƒ Available in multiple DC plug
configurations
ƒƒ Regulated output
ƒƒ Overload and short circuit protection
ƒƒ Constant voltage, constant current
ƒƒ Energy Star Efficiency Level IV
ƒƒ Built in EMI filter (CISPR 22 Class B)
ƒƒ Available in various output
connectors
ƒƒ Mini USB 2.0 dc output plug
- 0001
ƒƒ Micro USB 2.0 dc output plug
- 0002
ƒƒ Cable less version
- USB-A receptacle-0004
DCH3-050US-0001
DCH3-050US-0002
DCH3-050US-0004
Electrical Specifications
Input
Input range:
100 - 254 Vac (wide range)
Frequency:
EMI/RFI:
47 - 63 Hz
Safety ground
leakage current:
10 μA @ 50/60 Hz, 230 Vac input
FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B
&EMC89/336/EEC
Output
Voltage (Vo):
5 V (4.75 - 5.25 V)
Maximum Power (Po):
3W
Hold-up time:
25 ms. typical at full load @ 115 Vac
Overvoltage protection:
Single fault 10.5 V max. Latching type
Safety
Overload protection:
ƒƒ cUL 60950/6500
ƒƒ CSA 60950
Output short circuit protection auto recover
Overload protected > 800 mA
Output:
DC cable with Mini USB 2.0 -0001 suffix and Micro USB 2.0 -0002,
Cableless USB-A-0004 suffix
Connector Pinout:
Pin 1: +V
Pin 5: ground
Environmental Specifications
Operating temperature:
0° to 45 °C ambient
Storage temperature:
-20 °C to +70 °C
Electromagnetic susceptibility:
Designed to meet EN55082-1
Humidity:
Operating; non-condensing 20% to 90% RH
Vibration:
Per IEC 60068-2-6
DCH3 Series Data Sheet
Ordering Information
Model Number
Maximum
Power
Output
Voltage
Minimum
Load
Maximum Load
Ripple
P/P (PARD)1
Connector
DCH3-050US-0001
3W
5V
0
0.55 A
200 mV
Mini USB 2.0
DCH3-050US-0002
3W
5V
0
0.55 A
200 mV
Micro USB 2.0
DCH3-050US-0004
3W
5V
0
0.55 A
200 mV
USB-A
1. Peak-to-peak with 20 mHz bandwidth & 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage & load ranges.
2. Output should not be grounded for EMI purpose.
Mechanical Drawing
DCH3 Series Data Sheet
Pin Assignments
Notes:
1. Specifications subject to change without notice.
2. All dimensions in inches (mm), tolerance is ± .02”.
3. Warranty: 2 years
4. Weight: 0.144 lb./0.066kg.
WORLDWIDE OFFICES
Americas
Europe (UK)
Asia (HK)
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn
Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of
this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn
Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other
names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners.
© 2014 Artesyn Embedded Technologies, Inc.
www.artesyn.com
For more information: www.artesyn.com/power
For support: [email protected]
DCH3 Series-DS 06.19.14
Similar pages