SPECIFICATION CONTROL DRAWING Product Rev Product Name D-609-03 CMA Range* min max 300 1510 Max Weight Color I.D. O.D. Lbs./mpc Code A 1.27 (0.050) 2.03 (0.080) .30 Red 1.13 (0.045) 1.90 (0.075) D-609-04 A 779 2680 1.75 (0.069) 2.69 (0.106) .49 Blue 1.62 (0.064) 2.56 (0.101) D-609-05 A 1900 6755 2.59 (0.102) 3.89 (0.153) .99 Yellow 2.46 (0.097) 3.73 (0.147) * Not all wire combinations falling within the usable CMA range can be accommodated within the splicer barrel. MATERIAL 1. CRIMP SPLICER: Base Metal - Copper Alloy 101 or 102 per ASTM B 75. Plating: Tin per MIL-T-10727, Type I. APPLICATION 1. Parts shall be of seamless tubular construction. 2. Diameters shall be concentric within 0.127 (0.005) T.I.R. 3. Packing and packaging shall be in accordance with Section 5, Level C, of MIL-S-81824. Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. TITLE: UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Tyco Electronics reserves the right to amend ANGLES: N/A TOLERANCES: this drawing at any time. Users should 0.00 N/A evaluate the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A DRAWN BY: CAGE CODE: REPLACES: DCR NUMBER: M. FORONDA 06090 N/A CRIMP SPLICER, STUB Raychem D010058 If this document is printed it becomes uncontrolled. Check for the latest revision. DOCUMENT NO.: D-609-03/-04/-05 DATE: DOC ISSUE: 1 31-Jan.-01 PROD. REV.: SEE TABLE SCALE: None SIZE: A SHEET: 1 of 1 © 2004 Tyco Electronics Corporation. All rights reserved