Constant Impedance New Product Announcement! Voltage Variable Attenuator 50Ω HVA-73+ 5500 to 7000 MHz Click here for data sheet The Big Deal • Termination insensitive • Low Insertion Loss: 1.6 dB • Large attenuation range: 27 dB CASE STYLE: CZ682 Pricing: $9.95 (QTY 1-9) Product Overview The Mini-Circuits HVA series, surface mount, constant impedance voltage variable attenuators provide excellent attenuation and linearity performance while maintaining constant RF impedance across the attenuation range. Built using Mini-Circuits proven shielded module construction technology, these models integrate dual pin diodes along with internal 90 degree hybrids. This termination insensitive approach allows more flexibility so designers can locate the attenuators anywhere in their lineup, including cascading VVAs for true attenuation addition without VSWR interaction degrading the usable attenuation range. Key Features Feature Advantages Constant Impedance (Termination insensitive) The HVA series VVA incorporates 90° hybrids to buffer internal circuits from source and load mismatch. This unique feature enables the HVA series to maintain performance independent of source and load impedance, and allows units to be cascaded with true additive attenuation. Excellent flatness Typical attenuation flatness less than 1 dB typ. across the full band from 0 to 25 dB attenuation is great for feed forward applications. Return Loss 17 dB typ return loss across frequency and control voltage ranges provides an excellent match under all operating conditions allowing straightforward cascading. High IP3 High +43 dBm IP3 typ. at min attenuation and +35 dBm typ. up to 1.0V allows flexibility to locate VVA in lineup where attenuation is required the most without degrading system linearity. Mini-Circuits ® ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site TM Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp. Page 1