FS1A thru FS1M SURFACE MOUNT REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 1.0 Ampere FAST RECOVERY RECTIFIERS SMAE FEATURES H Cathode Band Plastic passivated Junction For surface mounted applications Low reverse leakage current Low forward voltage drop High current capability Plastic material has UL flammability classification 94V-0 J A E D MECHANICAL DATA Case : Molded plastic Polarity : Indicated by cathode band Weight : 0.002 ounces, 0.064 grams C B G DIMENSIONS INCHES MIN .081 .059 .002 -.030 .189 .159 .094 DIM A B C D E G H J MAX .089 .075 .010 .008 .052 .209 .167 .102 MM MIN 2.05 1.50 0.05 --0.76 4.80 4.05 2.40 MAX 2.25 1.90 0.25 .20 1.32 5.30 4.25 2.60 NOTE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current SYMBOL FS1A FS1B FS1D FS1G FS1J FS1K FS1M UNIT VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V @TL =90 C I(AV) 1.0 A Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load (JEDEC METHOD) IFSM 30 A VF 1.3 V IR 5.0 100 uA Typical Junction Capacitance (Note1) CJ 10 pF Typical Thermal Resistance (Note 2) R0JL 30 C/W Maximum Reverse Recovery Time (Note 3) TRR Maximum forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage Operating Temperature Range Storage Temperature Range @TJ =25 C @TJ =125 C 150 250 500 ns TJ -55 to +150 C TSTG -55 to +150 C NOTES : 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2. Thermal Resistance Junction to Lead. 3. Measured with :IF=0.5A, IR=1.0A, IRR=0.25A CTC0170 Ver. 1.0 1 of 2 FS1A thru FS1M FS1A thru FS1M 1.6 SINGLE PHASE HALF WAVE RESISTIVE OR INDUCTIVE P.C.B MOUNTED ON 0.315x0.315" (8.0x8.0mm) PADAREAS 1.4 1.2 1.0 .8 .6 .4 .2 0 CAPACITANCE, pF AVERAGE FORWARD RECTIFIED CURRENT AMPERES RATNG AND CHARACTERISTIC CURVES 20 40 60 80 100 120 140 160 O T J=25 C 10 1 180 1 10 LEAD TEMPERATURE , OC REVERSE VOLTAGE ,Vdc PEAK FORWARD SURGE CURRENT, AMPERES 30 25 8.3ms SINGLE HALF SINE WAVE JEDECIVETHOD 15 10 5 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz [+] 25Vdc (approx) (-) 1 Non Inductive PULSE WIDTH=300uS 1% DUTY CYCLE 1 O T J=25 C 0.1 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE,VOLTS t rr 10 Noninductive D.U.T 10 FIG.4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG . 3- PEAK FORWARD SURGE CURRENT 50 Noninductive INSTANTANEOUS FORWARD CURRENT, AMPERES FIG. 2- TYPICAL JUNCTION CAPACITANCE FIG . 1- FORWARD CURRENT DERATING CURVE 20 100 +0.5A PULSE GENERATOR NOTE2 0 -0.25 OSCILLOSCOPE NOTE 1 NOTE:1.Rise TIME=7ns max Input Impedance = 1 megohm. 22 pF 2.Rise Time = 10ns max Source Impedance = 50Ohms -1.0 SET TIME BASE FOR 50 ns/cm 1cm Fig. 5 - REVERSE FRCOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM CTC0170 Ver. 1.0 2 of 2 FS1A thru FS1M