MP2015A 24V, 150mA, Low Quiescent Current Linear Regulator The Future of Analog IC Technology DESCRIPTION FEATURES The MP2015A is a low power linear regulator that supplies power to systems with high voltage batteries. It includes a wide 2.5V to 24V input range, low dropout voltage and low quiescent supply current. The low quiescent current and low dropout voltage allow operations at extremely low power levels. Therefore, the MP2015A is an ideal for the low power microcontrollers and the battery-powered equipments. The MP2015A provides wide variety of fixed output voltage options (if request): 1.8V, 1.9V, 2.3V, 2.5V, 3.0V, 3.3V, 3.45V, 5.0V; and also provides the output adjustable option (from 1.215V to 15V). The regulator output current is internally limited and the device is protected against over-load and over-temperature conditions. The MP2015A also includes thermal shutdown and current limiting fault protection, and is available in QFN-6 (2mmx2mm), QFN 8(3mmx3mm), and TSOT23-4 packages. 2.5V to 24V Input Range 3.3µA Quiescent Supply Current Stable With low-value output ceramic capacitor (> 0.47μF) 150mA specified current for QFN-6 and QFN-8 Packages 100mA specified current for TSOT23-4 Packages 700mV Dropout at 150mA Load Available in Fixed 3.3V Output and Adjustable Output (1.215V to 15V) versions Output ±2% Accuracy for QFN-6 and QFN-8 Packages Output ±4% Accuracy TSOT23-4 Packages Specified current limit Thermal Shutdown and Short-Circuit Protection Available in TSOT23-4, QFN-6 (2mmx2mm), or QFN-8 (3mmx3mm) Packages APPLICATIONS Portable/Battery-Powered Equipment Ultra low power Microcontrollers Cellular Handsets All MPS parts are lead-free, halogen free, and adhere to the RoHS directive. For MPS green status, please visit MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION Output Adjustable Version (QFN) Output Adjustable Version (TSOT) Output Fixed Version (QFN) MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 1 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR ORDERING INFORMATION Part Number* MP2015AGQ MP2015AGQ-33 Package QFN-8 (3mmx3mm) QFN-8 (3mmx3mm) Top Marking See Below See Below * For Tape & Reel, add suffix –Z (e.g. MP2015AGQ–Z); TOP MARKING (MP2015AGQ) AMF: product code of MP2015AGQ; Y: year code; LLL: lot number; TOP MARKING (MP2015AGQ-33) ALC: product code of MP2015AGQ-33; Y: year code; LLL: lot number; PACKAGE REFERENCE EXPOSED PAD ON BACKSIDE CONNECT TO GND QFN-8 (3mmx3mm) MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 2 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR ORDERING INFORMATION Part Number* MP2015AGG** MP2015AGG-33** Package QFN-6 (2mmx2mm) QFN-6 (2mmx2mm) Top Marking See Below See Below * For Tape & Reel, add suffix –Z (e.g. MP2015AGG–Z); ** Pre-release TOP MARKING (MP2015AGG) DD: product code of MP2015AGG; Y: year code; LLL: lot number; TOP MARKING (MP2015AGG-33) DC: product code of MP2015AGG-33; Y: year code; LLL: lot number; PACKAGE REFERENCE QFN-6(2mmx2mm) MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 3 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR ORDERING INFORMATION Part Number* MP2015AGJE Package TSOT23-4 Top Marking See Below * For Tape & Reel, add suffix –Z (e.g. MP2015AGJE–Z); TOP MARKING (MP2015AGJE) AMF: product code of MP2015AGJE; Y: year code; PACKAGE REFERENCE TSOT23-4 MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 4 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR ABSOLUTE MAXIMUM RATINGS (1) Thermal Resistance IN, EN ..........................................-0.3V to +26V OUT ..............................................-0.3V to +17V FB .................................................-0.3V to +6V Lead Temperature ....................................260C Storage Temperature ............... -65C to +150C (2) Continuous Power Dissipation (TA = +25°C) QFN8(3x3mm) ......................................... 2.08W QFN-6(2mmx2mm) ..................................1.25W TSOT23-4 ................................................0.45W QFN-6 (2mmx2mm)..................80......16…C/W QFN-8 (3mmx3mm)...................48......11...C/W TSOT23-4 .............................. 220 .... 110.. C/W ESD SUSCEPTIBILITY (3) HBM (Human Body Mode) ..........................2kV MM (Machine Mode) ................................ 200V Recommended Operating Conditions (4) Supply Voltage VIN ........................... 2.5V to 24V Output Voltage VOUT .................... 1.215V to 15V Operating Junction Temp (TJ). . -40°C to +125°C (5) θJA θJC Notes: 1) Exceeding these ratings may damage the device. 2) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-toambient thermal resistance θJA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (MAX)-TA)/θJA. Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3) Devices are ESD sensitive. Handling precaution recommended. 4) The device is not guaranteed to function outside of its operating conditions. 5) Measured on JESD51-7, 4-layer PCB. MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 5 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR ELECTRICAL CHARACTERISTICS VEN=VIN, COUT=1µF, TA=-40°C to +125°C, TA ≤ TJ ≤ +150°, unless otherwise noted. Typical values are at TA = +25°C. Parameter Input Voltage Output Voltage Range GND Pin Current Shutdown Supply Current Load Current limit Symbol Dropout Voltage VIN=VOUT(NOM)- 0.1V Min Typ Max Units VIN 2.5 24 V VOUT 1.215 15 V IGND ISHDN ILIMIT Output Voltage Accuracy FB Voltage Condition VFB VDROPOUT MP2015AGQ/AGJE, 0<IOUT<1mA, VIN=2.5V to 24V, VOUT= 5V (VIN≥6V) or FB (VIN<6V) MP2015AGQ/AGJE, 1mA<IOUT<30mA, VIN=2.5V to 15V, VOUT= 5V (VIN≥6V) or FB (VIN<6V) MP2015AGQ, 30mA<IOUT<150mA, VIN=2.5V, VOUT=FB MP2015AGJE, 30mA<IOUT<100mA, VIN=2.5V, VOUT=FB MP2015AGQ-33, 0mA<IOUT<1mA, VIN=4.3V to 24V MP2015AGQ-33, 1mA<IOUT<30mA, VIN=4.3V to 15V MP2015AGQ-33, 30mA<IOUT<150mA , VIN=4.3V 9 11 22 uA 32 50 35 50 4.4 10 15 25 35 50 3 9 uA 160 270 400 mA 160 270 400 mA 120 270 400 mA 3.234 3.3 3.366 V 1.191 1.215 1.239 1.191 1.215 1.239 1.167 1.215 1.263 600 1100 mV 700 1100 mV 400 900 mV VEN=0,VIN=2.5V to 24V MP2015AGQ-33, VOUT=0V, VIN=4.3V to 15V MP2015AGQ, VOUT=0V, VIN=6V to 15V MP2015AGJE, VOUT=0V, VIN=6V to 15V MP2015AGQ-33, VIN=4.3V, IOUT=0 MP2015AGQ/AGQ-33, FB=OUT, VIN=5V,IOUT=0 MP2015AGJE, FB=OUT, VIN=6V, IOUT=0, TA = +25°C MP2015AGJE, FB=OUT, VIN=6V, IOUT=0, TA = -40°C to +125°C MP2015AGQ, IOUT=150mA, VOUT(NOM)=5V MP2015AGQ-33, IOUT=150mA, VOUT(NOM)=3.3V MP2015AGJE, IOUT=100mA, VOUT(NOM)=5V 3.3 MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. uA V 6 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR ELECTRICAL CHARACTERISTICS (continued) VEN=VIN, COUT=1µF, TA=-40°C to +125°C, TA ≤ TJ ≤ +150°, unless otherwise noted. Typical values are at TA = +25°C. Parameter Symbol FB Pin Input Current Line Regulation IFB (6) Load Regulation (7) Output Voltage PSRR (8) 6) Line Regulation= Max Units 0.88 1.3 1.72 uA -50 0 50 nA 0.01 0.05 %/V 0.005 0.012 %/mA 0.005 0.015 %/mA 0.005 0.012 %/mA 58 dB 1kHz, CIN=100pF, COUT=4.7μF, IOUT=10mA, VIN=6V, VOUT=5V 41 dB 100kHz, CIN=100pF, COUT=4.7μF, IOUT=10mA, VIN=6V, VOUT=5V 55 dB 3 ms 1.8 ms ENTH_R VIN=2.5V to 24V 1.32 1.48 1.64 V (9) ENTH_F VIN=2.5V to 24V 1.1 1.26 1.42 V (9) IEN 0.1 uA EN Pin Input Current Notes: Typ (9) EN Falling Threshold Thermal Shutdown Thermal Shutdown Hysteresis Min MP2015AGQ/AGJE, IOUT=100mA, COUT=6.8uF, VOUT=5V MP2015AGQ-33, IOUT=10mA, COUT=6.8uF, VOUT=3.3V Startup Response Time EN Rising Threshold Condition MP2015A-33, VFB=1.3V, VIN=6V, OUT floating. MP2015A, VFB=1.3V, VIN=6V, OUT floating. VIN=2.5V to 24V, IOUT=1mA, OUT=FB MP2015AGQ, IOUT=100uA to 150mA，VIN=4.3V to 6V MP2015AGQ-33, IOUT=100uA to 150mA， VIN=4.3V to 6V MP2015AGJE, IOUT=100uA to 100mA, VIN=3V to 6V 100Hz, CIN=100pF, COUT=4.7μF，IOUT=10mA, VIN=6V, VOUT=5V (8) VEN=0 or 15V, VIN=2.5V to 24V TSD 150 ᇞTSD | VOUT[ VIN( MAX ) ] VOUT[ VIN( MIN ) ] | (VIN(MAX ) VIN(MIN) ) VOUT(NOM) 165 C 20 C (% / V) 7) Load Regulation= | VOUT[IOUT ( MAX ) ] VOUT[IOUT (MIN) ] | (% / mA) (IOUT(MAX) IOUT(MIN) ) VOUT(NOM) 8) Derived from bench characterization. Not tested in production. 9) TSOT23-4 package has no EN pin MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 7 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR TYPICAL CHARACTERISTICS CIN = 1μF, COUT = 4.7μF, VOUT=5V, TA = +25ºC, unless otherwise noted. MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 8 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR TYPICAL PERFORMANCE CHARACTERISTICS CIN = 1μF, COUT = 4.7μF, VOUT=5V, TA = +25ºC, unless otherwise noted 40 7 700 35 6.5 600 30 6 25 5.5 20 5 15 4.5 10 4 200 5 3.5 100 0 0 30 60 90 120 500 400 300 3 5 150 10 15 20 0 25 0 600 5.04 5.08 500 5.03 5.07 400 5.02 300 5.01 200 5.00 100 4.99 30 60 90 120 150 5.06 5.05 0 4.98 0 15 30 45 60 75 90 105120135150 5.04 0 25 50 75 5.03 5 100 125 150 2.52 1.810 3.34 2.51 1.805 3.33 2.50 3.32 20 25 1.800 1.795 2.49 1.790 2.48 3.31 3.30 15 VOUT (V) VOUT (V) 3.35 10 1.785 2.47 0 5 10 15 20 25 0 5 10 15 20 25 1.780 0 5 10 MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 15 20 25 9 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR TYPICAL PERFORMANCE CHARACTERISTICS (continued) CIN = 1μF, COUT = 4.7μF, VOUT=5V, TA = +25ºC, unless otherwise noted 1.230 70 1.225 60 1.220 VO/AC 100mV/div. 50 1.215 40 1.210 30 1.205 1.200 VIN 2V/div. VO/AC 50mV/div. 0 5 10 15 20 25 20 10 IOUT 50mA/div. 100 1000 10000 100000 1000000 VIN 5V/div. VIN 5V/div. IOUT 50mA/div. IOUT 50mA/div. VO 2V/div. VO 2V/div. VO 50mV/div. VO 2V/div. VO 2V/div. VIN 5V/div. IOUT 200mA/div. IOUT 100mA/div. IOUT 100mA/div. MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 10 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR PIN FUNCTIONS QFN6 (2x2mm) 1 Pin # QFN8 (3x3mm) 1 2 2 3, exposed pad 4, exposed pad TSOT23-4 2 Name IN EN 1 GND 4 5 4 FB 6 8 3 OUT 5 3, 6, 7 NC Description Input Voltage. Connect a 2.5V to 24V supply to this pin. A logic low on this pin will shut down the IC, a logic high will start it up. Connect this pin to IN for automatic start up. Ground (the exposed pad and GND pin must be connected to the same ground plane) Feedback Input Pin, regulated to 1.215V nominally. Connected to an external resistive divider between OUT and GND to set output voltage. For fixed output version, this pin can be just float. Regulated Output Voltage, only low-value ceramic capacitor (≥ 0.47μF) on output is required for stability. No Connection. May be left open or tied to Ground for improved thermal performance. MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 11 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR OPERATION The MP2015A is a linear regulator that supplies power to systems with high voltage batteries. It includes a wide 2.5V to 24V input range, low dropout voltage and low quiescent supply current. When the junction temperature is too high, the thermal sensor sends a signal to the control logic that will shutdown the IC. The IC will restart when the temperature has sufficiently cooled. The MP2015A provides wide variety of fixed output voltage option: 1.8V, 1.9V, 2.3V, 2.5V, 3.0V, 3.3V, 3.45V, 5.0V; and also provides the output adjustable option (from 1.215V to 15V). The maximum power output current is a function of the package’s maximum power dissipation for a given temperature. The output adjustable version has an output that is adjustable from 1.215V to 15V with a simple resistor divider. It uses external feedback, allowing the user to set the output voltage with an external resistor divider. The typical FB pin voltage is 1.215V. The maximum power dissipation is dependent on the thermal resistance of the case and the circuit board, the temperature difference between the die junction and the ambient air, and the rate of air flow. The GND pin and Exposed Pad must be connected to the ground plane for proper dissipation. The regulator output current is internally limited and the device is protected against over-load and over-temperature conditions. The peak output current is limited to around 270mA, which exceeds the 150mA recommended continuous output current. IN UVLO Vreference EA OUT EN GND FB For fixed output version only Figure 1: Functional Block Diagram MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 12 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR APPLICATION INFORMATION COMPONENT SELECTION Setting the Output Voltage For adjustable output version. Set the output voltage of the MP2015A by using a resistor divider as shown: OUT VOUT R1 GND FB R2 Figure 2: FB Resistor Divider to Set VOUT Choose R2=1MΩ to maintain a 1.215µA minimum load. Calculate the value for R1 using the following equation: V R1 R2 OUT 1 1.215V (1) The above equation is only valid on adjustable output version. For fixed output version, VOUT also can be adjusted by adding external resistor divider. Just note to take internal FB resistor divider into consideration when choose external divider. Choose a small resistance to mask internal feedback resistor network. The equation (1) still work but require the sum of R1 and R2 is less than 100kΩ. Input Capacitor For proper operation, place a ceramic capacitor (C1) between 1µF and 10µF of dielectric type X5R or X7R between the input pin and ground. Larger values in this range will help to improve line transient response. Output Capacitor For stable operation, use a ceramic capacitor (C2) of type X5R or X7R between 1µF and 10µF. Larger values in this range will help to improve load transient response and reduce noise. Output capacitors of other dielectric types may be used, but are not recommended as their capacitance can deviate greatly from their rated value over temperature. To improve load transient response, add a small ceramic (X5R, X7R or Y5V dielectric) 22nF feed forward capacitor in parallel with R1. The feed forward capacitor is not required for stable operation. Output Noise The MP2015A will exhibit noise on the output during normal operation. This noise is negligible for most applications. However, in applications that include analog-to-digital converters (ADCs) of more than 12 bits, one needs to consider the ADC’s power supply rejection specifications. The feed forward capacitor across R1 will significantly reduce the output noise. PCB layout guide PCB layout is very important to achieve good regulation, ripple rejection, transient response and thermal performance. It is highly recommended to duplicate EVB layout for optimum performance. If change is necessary, please follow these guidelines and take figure 4 for reference. Figure 3: FB Divider of Fixed Output Version The internal FB resistor dividers for different fixed output versions please see below table. Table 1: Internal FB Resistor Divider Fixed Output Voltage R1_IN R2_IN 3.3V 1.72MΩ 1MΩ 1) Input and output bypass ceramic capacitors are suggested to be put close to the IN Pin and OUT Pin respectively. 2) Ensure all feedback connections are short and direct. Place the feedback resistors and compensation components as close to the chip as possible. MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 13 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR 3) Connect IN, OUT and especially GND respectively to a large copper area to cool the chip to improve thermal performance and long-term reliability. VIN IN MP2015A C1 EN VOUT OUT GND FB R1 R2 C2 Figure 4: PCB Layout (Top Layer) Design Example Below is a design example following the application guidelines for VOUT=3.3V. Figure 5: Design Example MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 14 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR TYPICAL APPLICATION CIRCUITS Figure 6: 5V Output Typical Application Circuit MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 15 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR PACKAGE INFORMATION QFN-8 (3mmx3mm) 2.90 3.10 0.30 0.50 PIN 1 ID MARKING 0.20 0.30 2.90 3.10 PIN 1 ID INDEX AREA 1.45 1.75 PIN 1 ID SEE DETAIL A 8 1 2.25 2.55 0.65 BSC 4 5 TOP VIEW BOTTOM VIEW PIN 1 ID OPTION A 0.30x45º TYP. PIN 1 ID OPTION B R0.20 TYP. 0.80 1.00 0.20 REF 0.00 0.05 SIDE VIEW DETAIL A NOTE: 2.90 0.70 1) ALL DIMENSIONS ARE IN MILLIMETERS. 2) EXPOSED PADDLE SIZE DOES NOT INCLUDE MOLD FLASH. 3) LEAD COPLANARITY SHALL BE0.10 MILLIMETER MAX. 4) JEDEC REFERENCE IS MO-229, VARIATION VEEC-2. 5) DRAWING IS NOT TO SCALE. 1.70 0.25 0.65 2.50 RECOMMENDED LAND PATTERN MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 16 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR QFN-6 (2mmx2mm) PIN 1 ID MARKING 1.90 2.10 0.30 0.40 0.20 0.30 1.90 2.10 PIN 1 ID INDEX AREA 0.65 0.85 PIN 1 ID SEE DETAIL A 6 1 1.25 1.45 0.65 BSC 3 4 TOP VIEW BOTTOM VIEW 0.80 1.00 0.20 REF PIN 1 ID OPTION A 0.30x45º TYP. PIN 1 ID OPTION B R0.20 TYP. 0.00 0.05 SIDE VIEW DETAIL A 1.90 0.70 NOTE: 0.70 1) ALL DIMENSIONS ARE IN MILLIMETERS. 2) EXPOSED PADDLE SIZE DOES NOT INCLUDE MOLD FLASH. 3) LEAD COPLANARITY SHALL BE0.10 MILLIMETER MAX. 4) JEDEC REFERENCE IS MO-229, VARIATION VCCC. 5) DRAWING IS NOT TO SCALE. 0.25 1.40 0.65 RECOMMENDED LAND PATTERN MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 17 MP2015A - 24V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR TSOT23-4 See note 7 EXAMPLE TOP MARK PIN 1 ID RECOMMENDED LAND PATTERN TOP VIEW SEATING PLANE SEE DETAIL ''A'' FRONT VIEW SIDE VIEW NOTE: DETAIL A 1) ALL DIMENSIONS ARE IN MILLIMETERS. 2) PACKAGE LENGTH DOES NOT INCLUDE MOLD FLASH, PROTRUSION OR GATE BURR. 3) PACKAGE WIDTH DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. 4) LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.10 MILLIMETERS MAX. 5) DRAWING CONFORMS TO JEDEC MO-193, VARIATION AA. 6) DRAWING IS NOT TO SCALE. 7) PIN 1 IS LOWER LEFT PIN WHEN READING TOP MARK FROM LEFT TO RIGHT, (SEE EXAMPLE TOP MARK) NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications. Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not assume any legal responsibility for any said applications. MP2015A Rev. 1.1 www.MonolithicPower.com 2/11/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 18