Lumileds L130-5080003000X21 High flux, hot-color targeted 6v package Datasheet

ILLUMINATION
LUXEON 3030 2D Line
High flux, hot-color targeted 6V package
LUXEON 3030 2D is a high flux, hot-color targeted mid power LED.
Hot-color targeting ensures that the LEDs are within color target at
application conditions—85°C. Using an industry standard packaging of
3.0mm x 3.0mm and 6V surface-mount emitter solution, LUXEON 3030
2D Line comes in all ANSI CCTs and delivers the efficacy and reliability
required for both indoor and outdoor illumination markets.
FEATURES AND BENEFITS
PRIMARY APPLICATIONS
Industry standard package enables drop-in replacement for existing
3030 packages
Downlights
1/9th micro-color binning enables tight color control
High Bay & Low Bay
Superior luminous flux at max current for reduced LED count
Lamps
Hot-color targeting ensures that color is within ANSI bin at typical
application conditions, 85°C
Outdoor
Enables 3-, 4-, 5-step MacAdam ellipse custom binning kits
DS207 LUXEON 3030 2D Line Product Datasheet ©2018 Lumileds Holding B.V. All rights reserved.
No. E352519
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristics Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Color Bin Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON 3030 2D Line LEDs are tested with a 20ms monopulse of 120mA at a junction temperature, Tj, of 25°C. Forward voltage
and luminous flux are binned at a Tj of 25°C, while color is hot targeted at a Tj of 85°C.
Part Number Nomenclature
Part numbers for LUXEON 3030 2D Line follow the convention below:
L 1 3 0 – A A B B 0 0 3 0 0 0 C 2 D
Where:
A A –
designates nominal CCT (22=2200K, 27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K,
57=5700K, 65=6500K)
B B –
designates minimum CRI (70=70CRI, 80=80CRI and 90=90CRI)
C
–
designates package type (W=Round LES, X=Square LES)
D
–
designates Lumileds internal code (1, 2, 3, etc.=shares the same base part)
Therefore, the following part number is used for a LUXEON 3030 2D (Square LES), 3000K 80CRI:
L 1 3 0 – 3 0 8 0 0 0 3 0 0 0 X 2 1
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3030
2D Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the
following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or
polybrominated diphenyl ethers (PBDE).
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON 3030 2D Line at 120mA and 65mA at specified temperature.
PRODUCT
NOMINAL MINIMUM
CCT [1]
CRI [2, 3]
LUMINOUS FLUX [2, 3] (lm)
MINIMUM
TYPICAL
TYPICAL
TYPICAL
TYPICAL
LUMINOUS
LUMINOUS
LUMINOUS
EFFICACY (lm/W) FLUX (lm) EFFICACY (lm/W)
120mA
LUXEON
3030 2D
(Round
LES)
LUXEON
3030 2D
(Square
LES)
PART NUMBER
65mA
3000K
70
98
117
163
67
180
L130-3070003000W21
3500K
70
100
119
165
68
183
L130-3570003000W21
4000K
70
101
122
169
70
188
L130-4070003000W21
5000K
70
101
122
169
70
188
L130-5070003000W21
5700K
70
101
122
169
70
188
L130-5770003000W21
6500K
70
101
122
169
70
188
L130-6570003000W21
2200K
80
80
94
131
54
145
L130-2280003000W21
2700K
80
80
107
149
61
165
L130-2780003000W21
3000K
80
85
109
151
62
168
L130-3080003000W21
3500K
80
85
113
157
64
174
L130-3580003000W21
4000K
80
90
118
164
67
182
L130-4080003000W21
5000K
80
90
118
164
67
182
L130-5080003000W21
5700K
80
90
118
164
67
182
L130-5780003000W21
6500K
80
90
118
164
67
182
L130-6580003000W21
2700K
90
72
90
125
51
138
L130-2790003000W21
3000K
90
75
92
128
52
142
L130-3090003000W21
3500K
90
75
95
132
54
146
L130-3590003000W21
4000K
90
75
98
136
56
151
L130-4090003000W21
5000K
90
75
98
136
56
151
L130-5090003000W21
2200K
80
89
99
138
56
152
L130-2280003000X21
2700K
80
101
112
156
64
172
L130-2780003000X21
3000K
80
102
113
157
64
174
L130-3080003000X21
3500K
80
107
117
163
67
180
L130-3580003000X21
4000K
80
110
121
168
69
186
L130-4080003000X21
5000K
80
110
121
168
69
186
L130-5080003000X21
5700K
80
110
121
168
69
186
L130-5780003000X21
6500K
80
110
121
168
69
186
L130-6580003000X21
2700K
90
86
95
132
54
146
L130-2790003000X21
3000K
90
88
98
136
56
151
L130-3090003000X21
3500K
90
91
101
140
58
155
L130-3590003000X21
4000K
90
94
104
144
59
160
L130-4090003000X21
5000K
90
94
104
144
59
160
L130-5090003000X21
Notes for Table 1:
1. Correlated color temperature is hot targeted at Tj=85°C.
2. Luminous flux and CRI are specified at Tj=25°. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed.
3. Lumileds maintains a tolerance of ±2 on CRI and ±7.5% on luminous flux measurements.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
3
Optical Characteristics
Table 2. Optical characteristics for LUXEON 3030 2D Line at 120mA, Tj=25ºC.
PART NUMBER
TYPICAL TOTAL INCLUDED ANGLE [1]
TYPICAL VIEWING ANGLE [2]
L130-xxxx003000x21
140°
116°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON 3030 2D Line at 120mA, Tj=25ºC.
PART NUMBER
FORWARD VOLTAGE [1] (Vf)
MINIMUM
TYPICAL
MAXIMUM
TYPICAL TEMPERATURE
COEFFICIENT OF FORWARD
VOLTAGE [2] (mV/°C)
5.8
6.0
6.6
-2.0 to -4.0
L130-xxxx003000x21
TYPICAL THERMAL
RESISTANCE—JUNCTION
TO SOLDER PAD (°C/W)
12.0
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
2. Measured between 25°C and 85°C.
Absolute Maximum Ratings
Table 4. Absolute maximum ratings for LUXEON 3030 2D Line.
PARAMETER
MAXIMUM PERFORMANCE
DC Forward Current [1]
Peak Pulsed Forward Current
240mA
[2]
300mA
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Class 2
LED Junction Temperature (DC & Pulse)
125°C
Operating Case Temperature
-40°C to 105°C
LED Storage Temperature
-40°C to 105°C
Soldering Temperature
JEDEC 020D 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse) [3]
-5V
Notes for Table 4:
1. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple”, are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed 25% of the maximum allowable DC forward current
2. Pulse operation with the maximum peak pulse forward current is acceptable if the pulse on time is ≤5ms per cycle and the duty cycle is ≤50%
3. At a maximum reverse current of 10µA. LUXEON 3030 2D LEDs are not designed to be driven in reverse bias.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
4
Characteristics Curves
Spectral Power Distribution Characteristics
Figure 1a. Typical normalized power vs. wavelength for L130-xx70003000x21 at 120mA, Tj=25°C.
Figure 1b. Typical normalized power vs. wavelength for L130-xx80003000x21 at 120mA, Tj=25°C.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
5
Figure 1c. Typical normalized power vs. wavelength for L130-xx90003000x21 at 120mA, Tj=25°C.
Light Output Characteristics
Junction Temperature [°C]
Figure 2. Typical normalized light output vs. junction temperature for L130-xxxx003000x21 at 120mA.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
6
ESTIMATED TYPICAL RATIO COMPARED TO FLUX AT RATED CONDITION 120mA, Tj=25°C.
60mA
65mA
100mA
150mA
200mA
53%
57%
85%
121%
154%
Figure 3. Typical normalized light output vs. forward current for L130-xxxx003000x21 at Tj=25°C.
Forward Current Characteristics
Figure 4. Typical forward current vs. forward voltage for L130-xxxx003000x21 at Tj=25°C.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
7
Radiation Pattern Characteristics
Figure 5. Typical radiation pattern for L130-xxxx003000x21 at 120mA, Tj=25ºC.
Figure 6. Typical polar radiation pattern for L130-xxxx003000x21 at 120mA, Tj=25ºC.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
8
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
LUXEON 3030 2D Line LEDs are labeled using a 4- or 5-digit alphanumeric CAT code following the format below.
A B C D or A x B C D
A
–
designates luminous flux bin (example: H=90 to 95 lumens, M=110 to 115 lumens)
x
–
designates Lumileds internal code
B C –
designates color bin (example: 7D, 7E, 7F, 7G, 7H, 7J, 7K, 7L or 7M for 3000K parts)
D
designates forward voltage bin (example: G=5.8 to 6.0V, J=6.2 to 6.4V)
–
Therefore, a LUXEON 3030 2D with a lumen range of 90 to 95, color bin of 7J, and a forward voltage range of 5.8 to 6.0V has the
following CAT code:
H 7 J G
Luminous Flux Bins
Table 5 lists the standard luminous flux bins for LUXEON 3030 2D Line emitters. Although several bins are outlined, product
availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5. Luminous flux bin definitions for LUXEON 3030 2D Line at 120mA, Tj=25°C.
BIN
LUMINOUS FLUX [1] (lm)
MINIMUM
MAXIMUM
D
70
75
E
75
80
F
80
85
G
85
90
H
90
95
J
95
100
K
100
105
L
105
110
M
110
115
N
115
120
P
120
125
Q
125
130
R
130
135
S
135
140
T
140
145
Notes for Table 5:
1. Lumileds maintains a tolerance of ±7.5% on luminous flux measurements.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
9
Color Bin Definition
Figure 7. 3- and 5-step MacAdam ellipse illustration for Tables 6a-6h.
0.450
0.440
ANSI 2200K
0.430
AJ
CIE 1931y
AF
AE
0.420
AK
AD
0.410
AG
AH
AM
0.400
AL
0.390
0.380
0.470
0.480
0.490
0.500
CIE 1931 x
0.510
0.520
0.530
Figure 8a. 1/9th color bin structure for LUXEON 3030 2D Line 2200K, hot-color targeted at 85°C.
Table 6a. 3- and 5-step MacAdam ellipse color bin definitions for L130-22xx003000x21 at test current, hot-color targeted at 85°C.
NOMINAL CCT
COLOR SPACE
CENTER POINT [1]
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, Θ
2200K
Single 3-step MacAdam ellipse
(0.5018, 0.4153)
0.008625
0.003975
49.27°
2200K
Single 5-step MacAdam ellipse
(0.5018, 0.4153)
0.014375
0.006625
49.27°
Notes for Table 6a:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
10
0.450
0.440
0.430
8J
CIE 1931y
0.420
0.410
8D
8G
8H
0.400
8L
8M
0.390
8K
8F
8E
2580K
2870K
0.380
0.370
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CIE 1931 x
Figure 8b. 1/9th color bin structure for LUXEON 3030 2D Line 2700K, hot-color targeted at 85°C.
Table 6b. 3- and 5-step MacAdam ellipse color bin definitions for L130-27xx003000x21 at test current, hot-color targeted at 85°C.
NOMINAL CCT
COLOR SPACE
CENTER POINT [1]
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, Θ
2700K
Single 3-step MacAdam ellipse
(0.4578, 0.4101)
0.00810
0.00420
53.70°
2700K
Single 5-step MacAdam ellipse
(0.4578, 0.4101)
0.01350
0.00700
53.70°
Notes for Table 6b:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
0.445
0.435
0.425
7K
CIE 1931 y
0.415
7J
7E
7F
0.405
7D
0.395
7M
7H
7L
2870K
0.385
0.375
7G
3200K
0.365
0.4050.410 0.415 0.420 0.4250.430 0.435 0.4400.445 0.450 0.455 0.4600.465
CIE 1931 x
Figure 8c. 1/9 color bin structure for LUXEON 3030 2D Line 3000K, hot-color targeted at 85°C.
th
Table 6c. 3- and 5-step MacAdam ellipse color bin definitions for L130-30xx003000x21, hot-color targeted at 85°C.
NOMINAL CCT
COLOR SPACE
CENTER POINT [1]
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, Θ
3000K
Single 3-step MacAdam ellipse
(0.4338, .04030)
0.00834
0.00408
53.22°
3000K
Single 5-step MacAdam ellipse
(0.4338, .04030)
0.01390
0.00680
53.22°
Notes for Table 6c:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
11
0.420
0.410
6K
0.400
6E
y
6F
6J
6D
0.390
6G
6H
0.380
6L
6M
3250K
0.370
3750K
0.360
0.380
0.390
0.400
0.410
0.420
0.430
0.440
x
Figure 8d. 1/9th color bin structure for LUXEON 3030 2D Line 3500K, hot-color targeted at 85°C.
Table 6d. 3- and 5-step MacAdam ellipse color bin definitions for L130-35xx003000x21, hot-color targeted at 85°C.
NOMINAL CCT
COLOR SPACE
CENTER POINT [1]
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, Θ
3500K
Single 3-step MacAdam ellipse
(0.4073, 0.3917)
0.00927
0.00414
54.00°
3500K
Single 5-step MacAdam ellipse
(0.4073, 0.3917)
0.01545
0.00690
54.00°
Notes for Table 6d:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
0.420
0.410
0.400
CIE 1931 y
0.390
5F
5J
0.380
5E
5D
5G
0.370
5K
5L
5H
3750K
5M
0.360
4250K
0.350
0.340
0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410
CIE 1931 x
Figure 8e. 1/9th color bin structure for LUXEON 3030 2D Line 4000K, hot-color targeted at 85°C.
Table 6e. 3- and 5-step MacAdam ellipse color bin definitions for L130-40xx003000x21, hot-color targeted at 85°C.
NOMINAL CCT
COLOR SPACE
CENTER POINT [1]
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, Θ
4000K
Single 3-step MacAdam ellipse
(0.3818, 0.3797)
0.00939
0.00402
53.72°
4000K
Single 5-step MacAdam ellipse
(0.3818, 0.3797)
0.01565
0.00670
53.72°
Notes for Table 6e:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
12
0.390
0.380
3K
0.370
3F
3J
CIE 1931 y
0.360
3E
3G
3D
0.350
3L
4750K
3H
3M
0.340
5250K
0.330
0.320
0.325
0.330
0.335
0.340
0.345
x
0.350
0.355
0.360
0.365
Figure 8f. 1/9th color bin structure for LUXEON 3030 2D Line 5000K, hot-color targeted at 85°C.
Table 6f. 3- and 5-step MacAdam ellipse color bin definitions for L130-50xx003000x21, hot-color targeted at 85°C.
NOMINAL CCT
COLOR SPACE
CENTER POINT [1]
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, Θ
5000K
Single 3-step MacAdam ellipse
(0.3447, 0.3553)
0.00822
0.00354
59.62°
5000K
Single 5-step MacAdam ellipse
(0.3447, 0.3553)
0.01370
0.00590
59.62°
Notes for Table 6f:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
0.370
0.360
2K
0.350
2F
2J
y
2E
0.340
2D
2G
2L
5250K
2H
0.330
2M
6000K
0.320
0.310
0.310
0.315
0.320
0.325
0.330
0.335
0.340
0.345
0.350
x
Figure 8g. 1/9th color bin structure for LUXEON 3030 2D Line 5700K, hot-color targeted at 85°C.
Table 6g. 3- and 5-step MacAdam ellipse color bin definitions for L130-57xx003000x21, hot-color targeted at 85°C.
NOMINAL CCT
COLOR SPACE
CENTER POINT [1]
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, Θ
5700K
Single 3-step MacAdam ellipse
(0.3287, 0.3417)
0.00746
0.00320
59.09°
5700K
Single 5-step MacAdam ellipse
(0.3287, 0.3417)
0.01243
0.00533
59.09°
Notes for Table 6g:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
13
0.365
0.355
0.345
CIE 1931 y
1K
1F
0.335
1J
1E
0.325
1G
1D
1L
6000K
1H
1M
0.315
7000K
0.305
0.295
0.290
0.295
0.300
0.305
0.310
0.315
0.320
0.325
0.330
0.335
x
Figure 8h. 1/9th color bin structure for LUXEON 3030 2D Line 6500K, hot-color targeted at 85°C.
Table 6h. 3- and 5-step MacAdam ellipse color bin definitions for L130-65xx003000x21, hot-color targeted at 85°C.
NOMINAL CCT
COLOR SPACE
CENTER POINT [1]
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, Θ
6500K
Single 3-step MacAdam ellipse
(0.3123, 0.3282)
0.00669
0.00285
58.57°
6500K
Single 5-step MacAdam ellipse
(0.3123, 0.3282)
0.01115
0.00475
58.57°
Notes for Table 6h:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
Forward Voltage Bins
Table 7. Forward voltage bin definitions for LUXEON 3030 2D Line, Tj=25°C.
BIN
FORWARD VOLTAGE [1] (Vf)
MINIMUM
MAXIMUM
G
5.8
6.0
H
6.0
6.2
J
6.2
6.4
K
6.4
6.6
Notes for Table 7:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
14
Mechanical Dimensions
Figure 9a. Mechanical dimensions for LUXEON 3030 2D (Round LES).
Figure 9b. Mechanical dimensions for LUXEON 3030 2D (Square LES).
Notes for Figures 9a and 9b:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. Tolerance: ±0.10mm.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
15
Reflow Soldering Guidelines
tp
Tp
Critical Zone
TL to Tp
Ramp-up
TL
Temperature
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 8.
Table 8. Reflow profile characteristics for LUXEON 3030 2D Line.
PROFILE FEATURE
LEAD FREE ASSEMBLY
Preheat Minimum Temperature (Tsmin)
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 120 seconds
Ramp-Up Rate (TL to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
20 to 40 seconds
Ramp-Down Rate (Tp to TL)
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
Notes for Table 8:
1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
JEDEC Moisture Sensitivity
Table 9. Moisture sensitivity levels for LUXEON 3030 2D Line.
LEVEL
3
FLOOR LIFE
SOAK REQUIREMENTS STANDARD
TIME
CONDITIONS
TIME
CONDITIONS
168 Hours
30°C / 60% RH
192 Hours +5 / -0
30°C / 60% RH
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
16
Solder Pad Design
0.58
0.48
0.05
0.69
2.30
2.10
0.13
1.15
2.20
2.30
Solder mask
Stencil
Top copper
Package geometric center
1.33
1.53
Figure 11. Recommended PCB solder pad layout for LUXEON 3030 2D Line.
Notes for Figure 11:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
17
Packaging Information
Pocket Tape Dimensions
Figure 12a. Pocket tape dimensions for LUXEON 3030 2D (Round LES).
Figure 12b. Pocket tape dimensions for LUXEON 3030 2D (Square LES).
Notes for Figures 12a and 12b:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
18
Reel Dimensions
Figure 13a. Reel dimensions for LUXEON 3030 2D (Round LES).
Figure 13b. Reel dimensions for LUXEON 3030 2D (Square LES).
Notes for Figures 13a and 13b:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS207 LUXEON 3030 2D Line Product Datasheet 20180322 ©2018 Lumileds Holding B.V. All rights reserved.
19
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world safer, better and more beautiful—with light.
To learn more about our lighting solutions, visit lumileds.com.
©2018 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds
Holding B.V. in the United States and other countries.
lumileds.com
DS207 LUXEON 3030 2D Line
Product Datasheet 20180322
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.