MMBT3906SL C PNP Epitaxial Silicon Transistor Features E • General purpose amplifier transistor. B • Ultra small surface mount package for all types(max 0.43mm tall) • Suitable for general switching & amplification SOT-923F • Well suited for portable application Marking : AB • As complementary type, NPN MMBT3904SL is recommended. • Pb free Absolute Maximum Ratings Symbol Ta = 25°C unless otherwise noted Parameter Value Unit VCBO Collector-Base Voltage -40 V VCEO Collector-Emitter Voltage -40 V VEBO Emitter-Base Voltage -5 V IC Collector Current 200 mA TJ Junction Temperature 150 °C TSTG Storage Temperature Range -55 ~ 150 °C * 1. These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics* T =25°C unless otherwise noted a Symbol Parameter Max Unit PC Collector Power Dissipation, by RθJA 227 mW RθJA Thermal Resistance, Junction to Ambient 550 °C/W * Minimum land pad. Electrical Characteristics* Ta=25°C unless otherwise noted Symbol Parameter Test Condition Min. Max. Unit BVCBO Collector-Base Breakdown Voltage IC = -10μA, IE = 0 -40 V BVCEO Collector-Emitter Breakdown Voltage IC = -1mA, IB = 0 40 V BVEBO Emitter-Base Breakdown Voltage IE = -10μA, IC = 0 -5 ICEX Collector Cut-off Current VCE = -30V, VEB(OFF) =-0.3V hFE DC Current Gain VCE = 1V, IC =- 0.1mA VCE = 1V, IC = -1mA VCE = 1V, IC = -10mA VCE = 1V, IC = -50mA VCE = 1V, IC = -100mA V -50 60 80 100 60 30 nA 300 VCE (sat) Collector-Emitter Saturation Voltage IC = -10mA, IB = -1mA IC = -50mA, IB = -5mA VBE (sat) Base-Emitter Saturation Voltage IC = -10mA, IB = -1mA IC = -50mA, IB = -5mA fT Current Gain Bandwidth Product VCE = -20V, IC = -10mA, f = 100MHz Cob Output Capacitance VCB = -5V, IE = 0, f = 1MHz 7.0 pF Cib Input Capacitance VEB = -0.5V, IC = 0, f = 1MHz 15 pF td Delay Time 35 ns tr Rise Time VCC = -3V, IC = -10mA IB1 =- IB2 = -1mA 35 ns ts Storage Time 225 ns tf Fall Time 75 ns -0.65 -0.25 -0.4 V V -0.85 -0.95 V V 250 MHz * DC Item are tested by Pulse Test : Pulse Width≤300us, Duty Cycle≤2% © 2007 Fairchild Semiconductor Corporation MMBT3906SL Rev. 1.0.0 www.fairchildsemi.com 1 MMBT3906SL — PNP Epitaxial Silicon Transistor February 2008 Figure 1. DC Current Gain Figure 2. Collector-Emitter Saturation Voltage 1000 o T J=125 C o T J=75 C Ic=10*Ib Collector-Emitter Voltage,[mV] Vce=1V o T J=25 C Current Gain o T J=-25 C 100 o T J=125 C o T J=75 C o T J=25 C 100 o T J=-25 C 10 1 10 100 10 100 Collector Current, [mA] Collector Current, [mA] Figure 3. Base- Emitter Saturation Voltage Figure 4. Collector- Base Leakage Current 100 Base-Collector Leakage Current,[nA] Ic=10*Ib o Base- Emitter Voltage,[mV] o T J=25 C T J=-25 C 1000 o T J=75 C o T J=125 C 100 10 o T J=125 C 10 o T J=75 C o T J=25 C o T J=-25 C 1 10 100 30 40 Base-Collector Revere Voltage, [V] Collector Current, [mA] Figure 5. Collector- Base Capacitance Figure 6. Power Derating 12 300 f=1mhz 250 11 Power Dissipation, [mW] Base- Collector Juntion Capacitance, Cob[pF] 20 9 8 6 200 150 100 50 0 0 5 0 10 50 75 100 125 150 o Base- Collector Reverse Voltage, V cb[V] Ambient Temperature, Ta[ C] © 2007 Fairchild Semiconductor Corporation MMBT3906SL Rev. 1.0.0 25 www.fairchildsemi.com 2 MMBT3906SL — PNP Epitaxial Silicon Transistor Typical Performance Characteristics MMBT3906SL — PNP Epitaxial Silicon Transistor Package Dimensions SOT-923F • Case : SOT-923F • Case Material(Molded Plastic): KTMC1060SC • UL Flammability classification rating : “V0” • Moisture Sensitivity level per JESD22-A1113B : MSL 1 • Lead terminals solderable per MIL-STD7502026 /JESD22A121 • Lead Free Plating : Pure Tin(Matte) Dimensions in Millimeters © 2007 Fairchild Semiconductor Corporation MMBT3906SL Rev. 1.0.0 www.fairchildsemi.com 3 The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® Power247® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FPS™ FRFET® Global Power ResourceSM ® PDP-SPM™ Power220® SuperSOT™-8 SyncFET™ The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® UniFET™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. 2. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I31 © 2007 Fairchild Semiconductor Corporation MMBT3906SL Rev. 1.0.0 www.fairchildsemi.com 4 MMBT3906SL PNP Epitaxial Silicon Transistor TRADEMARKS