CLV1015E-LF PHASE NOISE (1 Hz BW, typical) Rev C3 Voltage-Controlled Oscillator Surface Mount Module Applications • Data Transmitter • Digital Radios • Satellite Communications £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 987 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -109 Harmonic Suppression (2nd) -36 Tuning Voltage 0.6 Max Units 1032 MHz dBc/Hz -30 dBc 5 Vdc MHz/V 21 Tuning Sensitivity (avg.) -1 dBm Input Capacitance 50 pF Pushing 2 MHz/V Pulling (12 dB Return Loss, Any Phase) 2 MHz 85 °C Max Units Power Output -7 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements -4 MINI-14S Min Typ Supply Voltage (Vcc, nom.) 4.5 Supply Current (Icc) 15 Vdc 18 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CLV1015E-LF Rev C3 Tuning Curve, typ. FREQUENCY (MHz) 1075 1060 1045 1030 85 °C 25 °C 1015 1000 -40 °C 985 970 955 940 0 0.6 1.2 1.8 2.4 3 3.6 4.2 4.8 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 2 1 0 -1 -2 -3 0.030 MIN. CUTBACK FROM LIVE PADS -4 -5 -6 -7 -8 952 968 981 994 1007 1020 1033 1047 1061 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B