AM2F Series • REGULATED SINGLE OUTPUT • 12 PIN SIP PACKAGE • LOW RIPPLE & NOISE • HIGH EFFICIENCY UP TO 68% • INPUT/OUTPUT ISOLATION: 1000, 3000 & 5200VDC • OPERATING TEMPERATURE: -25°C ... +71°C • PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS GENERAL DESCRIPTION Our AM2F series is a family of cost effective 2W single output DC-DC converters. These converters combine miniature package in a 12-pin SIP compatible case with high performance features such as 1000VDC, 3000VDC & 5200VDC input/output isolation voltage, continuous short circuit protection with automatic restart and tight line / load regulation. Input voltages of 5, 12 & 24VDC with producing output voltage levels of 3.3, 5, 7.2, 9, 12, 15, 18, 24VDC. High performance features include high efficiency operation up to 68% and output voltage accuracy of ±2% maximum. Standard features include an input range of ±10% tolerance and low output noise and ripple. All models are package in a low profile 31.80x8.60x13.47mm 12 pin SIP nonconductive black plastic case. Operation is specified over the full operating temperature range of -25°C to +71°C with no derating required. Cooling is by free-air convection. ELECTRICAL SPECIFICATIONS Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified Input Specifications: Voltage range Filter ±10% p (Pi) Network Isolation Specifications: Rated voltage (60 sec) Resistance Capacitance 1000, 3000 & 5200VDC > 1000MOhm 60pF, typ. Output Specifications: Voltage accuracy Ripple & noise (at 20MHz BW) Short circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient ±2%, max. 75mVp-p, max. Continuous Automatic ±0.5%, max. ±0.5%, max. ±0.02%/°C, typ. General Specifications: Efficiency Switching frequency DC-DC CONVERTERS 2 watt dc-dc converters 64% to 68% 125KHz, typ. 100% load Environmental Specifications: Operating temperature (ambient) -25°C ... +71°C Storage temperature -40°C ... +125°C Case temperature +90°C, max. Derating None required Humidity (non-condensing) Up to 90% Cooling Free-air Convection Physical Specifications: Dimensions Weight Case material 31.80x8.60x13.47mm 1.25x0.34x0.53inches 10.7g Non-conductive black plastic MTBF: > 1,024,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25°C) Specifications are subject to change without notification OUTLINE DIMENSIONS & PIN CONNECTIONS Pin 1000, 3000 & 5200VDC Single 1 2 3 9 10 11 12 +V Input N.C. N.C. N.C. -V Output +V Output -V Input Continued on next page VISIT US AT WWW.AIMTEC.CA 39 AM2F Series MODELS Single regulated output Models DC-DC CONVERTERS Isolation 1000VDC Isolation 3000VDC Isolation 5200VDC AM2F-0503S AM2F-0505S AM2F-0507S AM2F-0509S AM2F-0512S AM2F-0515S AM2F-0518S AM2F-0524S AM2F-1203S AM2F-1205S AM2F-1207S AM2F-1209S AM2F-1212S AM2F-1215S AM2F-1218S AM2F-1224S AM2F-2403S AM2F-2405S AM2F-2407S AM2F-2409S AM2F-2412S AM2F-2415S AM2F-2418S AM2F-2424S AM2F-0503SH30 AM2F-0505SH30 AM2F-0507SH30 AM2F-0509SH30 AM2F-0512SH30 AM2F-0515SH30 AM2F-0518SH30 AM2F-0524SH30 AM2F-1203SH30 AM2F-1205SH30 AM2F-1207SH30 AM2F-1209SH30 AM2F-1212SH30 AM2F-1215SH30 AM2F-1218SH30 AM2F-1224SH30 AM2F-2403SH30 AM2F-2405SH30 AM2F-2407SH30 AM2F-2409SH30 AM2F-2412SH30 AM2F-2415SH30 AM2F-2418SH30 AM2F-2424SH30 AM2F-0503SH52 AM2F-0505SH52 AM2F-0507SH52 AM2F-0509SH52 AM2F-0512SH52 AM2F-0515SH52 AM2F-0518SH52 AM2F-0524SH52 AM2F-1203SH52 AM2F-1205SH52 AM2F-1207SH52 AM2F-1209SH52 AM2F-1212SH52 AM2F-1215SH52 AM2F-1218SH52 AM2F-1224SH52 AM2F-2403SH52 AM2F-2405SH52 AM2F-2407SH52 AM2F-2409SH52 AM2F-2412SH52 AM2F-2415SH52 AM2F-2418SH52 AM2F-2424SH52 Input Voltage 5V±10% 12V±10% 24V±10% Ouput Voltage Ouput Current max. 3.3VDC 5VDC 7.2VDC 9VDC 12VDC 15VDC 18VDC 24VDC 3.3VDC 5VDC 7.2VDC 9VDC 12VDC 15VDC 18VDC 24VDC 3.3VDC 5VDC 7.2VDC 9VDC 12VDC 15VDC 18VDC 24VDC 600mA 400mA 278mA 222mA 167mA 134mA 111mA 83mA 600mA 400mA 278mA 222mA 167mA 134mA 111mA 83mA 600mA 400mA 278mA 222mA 167mA 134mA 111mA 83mA 40 TO ORDER CALL 1-888-9-AIMTEC