ILLUMINATION For NEW designs consider this replacement product: N O O R L D O ER N G A E B R LE • LUXEON 3030 2D LUXEON 3535 2D High flux in a 3535 package with full range of CCTs and CRIs LUXEON 3535 2D is a mid power LED delivering optimized performance in combination with the Quality of Light needed for distributed light source applications. In addition, the product comes in specified correlated color temperature and color rendering combinations for high brightness systems while improving system lm/$. LUXEON 3535 2D emitters deliver the efficacy and reliability required by the indoor and outdoor illumination markets. FEATURES AND BENEFITS PRIMARY APPLICATIONS Industry standard package enables drop-in replacement for existing 3535 packages Architectural High efficacy for sustainable designs Downlights 80CRI minimum and R9>0 for quality indoor lighting High Bay & Low Bay 1/6th and 1/9th ANSI color binning delivers tight color control Indoor Area Lighting Full range of CCTs and CRIs Lamps Outdoor Specialty Lighting Spotlights RoHS COMPLIANT DS204 LUXEON 3535 2D Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved. Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 N O O R L D O ER N G A E B R LE Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Assembly Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Relative Spectral Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Luminous Efficacy Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. i General Information Part Number Nomenclature N O O R L D O ER N G A E B R LE LUXEON Mid-Power Illumination emitters are tested and binned at 100mA, with current pulse duration of 20ms. All characteristic charts where the thermal pad is kept at constant temperature (25°C typically) are measured with current pulse duration of 20ms. Under these conditions, junction temperature and thermal pad temperature are the same. The part number designations for the MXCA series is explained as follows: MXCA-BCDE-IJKL Where: A — designates minimum CRI performance (value 7 = 70 minimum and 8 = 80 minimum) B — designates radiation pattern (value P = Lambertian) C — designates color (value W = White) D, E — designates nominal ANSI CCT (for example, 30 = 3000K and 40 = 4000K) I, J, K & L — additional part number designation Therefore products in this series with minimum CRI value of 80, CCT of 4000K will have the part numbering scheme: MXC8-PW40-0000 Average Lumen Maintenance Characteristics Lumen maintenance for solid-state lighting devices (LEDs) is typically defined in terms of the percentage of initial light output remaining after a specified period of time. LM-80 test reports are available upon request. Environmental Compliance Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Mid-Power LEDs are compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely REACH and the RoHS directive. Lumileds will not intentionally add the following restricted materials to these LEDs: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 2 Product Selection Product Selection for Mid-Power LEDs Solder Pad Temperature = 25°C, Test Current = 100mA Table 1. Part Number Minimum CRI Typical CRI R9 Min Luminous Flux (lm) ɸV Typ Luminous Flux (lm) ɸV N O O R L D O ER N G A E B R LE Nominal CCT 2700K 3000K 3500K 4000K 5000K 5700K 6500K MXC8-PW27-0000 80 82 R9>0 55 80 MXC9-PW27-1111 85 90 R9>50 50 68 MXC9-PW27-0000 90 92 R9>50 50 68 MXC8-PW30-0000 80 82 R9>0 55 80 MXC9-PW30-1111 85 90 R9>50 50 68 MXC9-PW30-0000 90 92 R9>50 50 68 MXC8-PW35-0000 80 82 R9>0 55 80 MXC9-PW35-0000 85 90 typ 50 50 68 MXC7-PW40-0000 70 72 - 70 77 MXC8-PW40-0000 80 82 R>0 60 82 MXC9-PW40-0000 85 90 typ 50 55 65 MXC7-PW50-0000 70 72 - 70 77 MXC8-PW50-0000 80 82 R>0 60 83 MXC7-PW57-0000 70 72 - 70 77 MXC8-PW57-0000 80 82 R>0 60 73 MXC7-PW65-0000 70 72 - 70 77 MXC8-PW65-0000 80 82 R9>0 60 81 MXC9-PW65-0000 86 90 R9>46 60 76 Note for Table 1: 1. Lumileds maintains a tolerance of ±7.5% on luminous flux and ±2 on CRI measurements. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 3 Optical Characteristics Optical Characteristics of Mid-Power LEDs Solder Pad Temperature = 25°C, Test Current = 100mA Table 2. Minimum Typical Maximum Typical Total Included Angle [1] (degrees) u0.90V 2550K 2700K 2850K 150 3000K 2850K 3000K 3200K 150 115 3500K 3200K 3500K 3750K 150 115 4000K 3750K 4000K 4250K 150 115 5000K 4700K 5000K 5300K 150 115 5700K 5300K 5700K 6000K 150 115 6500K 6000K 6500K 7000K 150 115 Color Temperature CCT Typical Viewing Angle [2] (degrees) 2u ½ 115 N O O R L D O ER N G A E B R LE Nominal CCT 2700K Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. Electrical Characteristics Electrical Characteristics of Mid-Power LEDs Thermal Pad Temperature = 25°C, Test Current = 100mA Table 3. Minimum Typical Maximum Typical Temperature Coefficient of Forward Voltage [2] (mV/°C) DVF / DTJ 5.6 6.1 6.8 -2.0 to -4.0 Forward Voltage Vf [1] (V) Part Number MXCx-PWxx-0000 Typical Thermal Resistance Junction to Solder Pad (°C/W) Ru J-C 18 Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.10V on forward voltage measurements. 2. Measured at Tj between 25°C and 110°C. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 4 Absolute Maximum Ratings Table 4. Parameter Maximum Performance DC Forward Current (mA) [1] 200 Peak Pulsed Forward Current (mA) 240 ESD Sensitivity Class 2 HBM per ANSI/ESDA/JEDEC JS-001-2012 Pass 400V MM per JEDEC JESD22-A115C 125°C Operating Case Temperature at 100 mA -40°C - 105°C N O O R L D O ER N G A E B R LE LED Junction Temperature [2] Storage Temperature -40°C - 105°C Soldering Temperature JEDEC 020D 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vr) -5V [3], [4] Notes for Table 4: 1. Ripple current with a frequency of 50-150 Hz is allowed, as long as the average of the current waveform is below 200mA, and the maximum of the current waveform is lower than 200mA. 2. Proper current derating must be observed to maintain junction temperature below the maximum. 3. LUXEON Mid-Power LEDs are not designed to be driven in reverse bias. 4. At maximum reverse current of 10µA. JEDEC Moisture Sensitivity Table 5. 2 Soak Requirements Standard Floor Life Level Time Conditions Time Conditions 1 year [ 30°C / 60% RH 168 Hrs. + 5 / - 0 Hrs. [85°C / 60% RH DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 5 Reflow Soldering Characteristics 300 Tp: 260°C 260°C +0/-5°C 250 Ramp-Up Rate, 3°C/sec. max. 255°C +5/-0°C TL: 217°C Tsmax : 200°C tp: 10-30sec. 30sec max. N O O R L D O ER N G A E B R LE Temperature ( C) 200 Tsmin: 150°C 150 ts : 60-120sec. tL: 60-150 sec,max 100 50 0 0 50 100 150 200 250 300 Time (seconds) Temperature profile for Table 6. Table 6. Reflow Profile in Accordance with J-Std-020D. Profile Feature Lead Free Assembly Preheat/Soak : Temperature Min (Tsmin ) Temperature Max (Tsmax ) Maximum Time (ts ) from Tsmin to Tsmax 150°C 200°C 120 seconds Ramp-up Rate (TL to Tp ) 3°C / second Liquidous Temperature (TL ) 217°C Maximum Time (tL ) Maintained above TL 150 seconds Maximum Peak Package Body Temperature (Tp ) 260°C Time (tp ) within 5°C of the specified temperature (Tc ) 10-30 seconds Maximum Ramp-Down Rate (Tp to TL ) 6°C / second Maximum Time 25°C to Peak Temperature 8 minutes Note for Table 6: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 6 Mechanical Dimensions 2.6 Cathode Anode N O O R L D O ER N G A E B R LE 3.50±0.15 2.7 3.40±0.15 Part Mark Cathode 1.9 0.8 3.7 MAX 0.3 0.8 Figure 1. Package outline drawing. Notes for Figure 1: 1. All dimensions are in millimeters. 2. Tolerance: ±0.10mm. 3. Materials • Lead Frame: Copper Alloy with Silver Plating • Package Body: High Temperature Thermal Plastic • Encapsulant: Silicone Resin • Solder Lead Finish: Sn-Sn Plating DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 7 N O O R L D O ER N G A E B R LE Solder Pad Design Figure 2. Solder pad layout. Notes for Figure 2: 1. The drawing above shows the recommended solder pad layout on Printed Circuit Board (PCB). 2. Application Brief AB204 (to be released) provides extensive details for this layout. In addition, the .dwg files are available at www.lumileds.com. Assembly Precautions The LUXEON emitter package contains a silicone overcoat to protect the LED chip and extract the maximum amount of light. As with most silicones used in LED optics, care must be taken to prevent any incompatible chemicals from directly or indirectly reacting with the silicone. The silicone overcoat used in the LUXEON emitter is gas permeable. Consequently, oxygen and volatile organic compound (VOC) gas molecules can diffuse into the silicone overcoat. VOCs may originate from adhesives, solder fluxes, conformal coating materials, potting materials and even some of the inks that are used to print the PCBs. Some VOCs and chemicals react with silicone and produce discoloration and surface damage. Other VOCs do not chemically react with the silicone material directly but diffuse into the silicone and oxidize during the presence of heat or light. Regardless of the physical mechanism, both cases may affect the total LED light output. Since silicone permeability increases with temperature, more VOCs may diffuse into and/or evaporate out from the silicone. Please refer to AB203 for more details on VOCs and other incompatible chemicals. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 8 Relative Spectral Distribution N O O R L D O ER N G A E B R LE Relative Intensity vs. Wavelength, MXC7-PWxx Figure 3a. Typical color spectrum of MXC7-PWxx emitter, integrated measurement at solder pad temperature = 25°C, forward current = 100mA. Relative Intensity vs. Wavelength, MXC8-PWxx Figure 3b. Typical color spectrum of MXC8-PWxx emitter, integrated measurement at solder pad temperature = 25°C, forward current = 100mA. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 9 N O O R L D O ER N G A E B R LE Relative Intensity vs. Wavelength, MXC9-PWxx Figure 3c. Typical color spectrum of MXC9-PWxx emitter, integrated measurement at solder pad temperature = 25°C, forward current = 100mA. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 10 Light Output Characteristics N O O R L D O ER N G A E B R LE Relative Flux over Temperature MXCx-PWxx Figure 4. Typical relative light output vs. solder pad temperature, forward current = 100mA. Relative Flux vs. Forward Current MXCx-PWxx Figure 5. Typical relative luminous flux vs. forward current, solder pad temperature = 25°C. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 11 Luminous Efficacy Characteristics N O O R L D O ER N G A E B R LE Relative Luminous Efficacy vs. Forward Current MXCx-PWxx Figure 6. Typical emitter efficacy versus forward current, solder pad temperature = 25°C. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 12 Forward Current Characteristics N O O R L D O ER N G A E B R LE Forward Current vs. Forward Voltage MXCx-PWxx Figure 7. Typical forward current vs. forward voltage, solder pad temperature = 25°C. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 13 Typical Radiation Patterns N O O R L D O ER N G A E B R LE Radiation Pattern in Cartesian Coordinate System Figure 8. Typical representative spatial radiation pattern. Radiation Pattern in Polar Coordinate System Figure 9. Typical polar plot of radiation pattern. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 14 Emitter Pocket Tape Packaging Ø1.50 4.0 ±0.1 2.0 ±0.05 2.2 ±0.1 1.75 ± 0.1 Anode Side 3.85 ± 0.1 8.0 ±0.1 5.5 ±0.1 12 +0.3/-0.1 N O O R L D O ER N G A E B R LE Anode Mark Ø1.50 ±0.25/-0.0 0.29 ±0.02 3.75 ±0.1 Figure 10. Emitter pocket tape packaging. Notes for Figure 10: 1. All dimensions are in millimeters 2. Empty component pockets sealed with top cover tape 3. The maximum number of consecutive missing LEDs is two. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 15 Emitter Reel Packaging 329 100 +/-0.5 13,1 +0,5 -0,2 N O O R L D O ER N G A E B R LE 18.4 (max, measure at hub) 1.5 n mi +2 12,4-0 Figure 11. Emitter reel packaging. Notes for Figure 11: • All dimentions are in millimeters. • Empty component pockets sealed with top cover tape. • 329 mm reel - 5000 pieces per reel. • Minimum packing quantity is 5000 pieces. • The maximum number of consecutive missing LEDs is two. • In accordance with EIA-481-1-B specification. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 16 Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. For this reason, Lumileds bins the LED components for luminous flux, color and forward voltage (Vf ). N O O R L D O ER N G A E B R LE Decoding Product Bin Labeling LUXEON Mid-Power emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. Reels of 2700K, 3000K, 3500K, 4000K, 5000K, 5700K and 6500K emitters are labeled with a four or five digit alphanumeric CAT code following the format below. A B C D or A x B C D Where: A= Flux bin (D, etc.) x= Lumileds internal use B and C = Color bin (For example 51, 52, 53, 54, 55, 56 or 5D, 5E, 8F, 8G, 8H, 8J, 8K, 8L, 8M) D= Vf bin Luminous Flux Bins Table 7 lists the standard photometric luminous flux bins for LUXEON Mid-Power emitters (tested and binned at 100mA). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 7. Flux Bins Bin Code Minimum Photometric Flux (lm) Maximum Photometric Flux (lm) A 55 60 B 60 65 C 65 70 D 70 75 E 75 80 F 80 85 G 85 90 H 90 95 J 95 100 K 100 105 L 105 110 M 110 115 N 115 120 Tested and binned at 25°C, If=100mA. Tester tolerance: ±7.5%. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 17 Forward Voltage Bins Table 8. Vf Bins Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) F 5.6 5.8 G 5.8 6 6 6.2 J 6.2 6.4 K 6.4 6.6 N O O R L D O ER N G A E B R LE H L 6.6 6.8 Tested and binned at 25°C, If = 100mA. Tester tolerance: ±0.10V. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 18 Color Bin Structure MXCx-PW27-xxxx 1/6th Color Bin Structure 0.450 N O O R L D O ER N G A E B R LE 0.440 0.430 81 0.420 83 85 y 2700K 0.410 0.400 82 84 86 2580 0.390 2870K 0.380 0.370 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 0.470 0.475 0.480 0.485 0.490 x Figure 12. ANSI 2700K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 9. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW27-xxxx Emitter Bin Code x y Bin Code x y 81 0.4625 0.4729 0.4813 0.4703 0.4113 0.4299 0.4319 0.4132 84 0.4446 0.4546 0.4625 0.4520 0.3910 0.4095 0.4113 0.3927 82 0.4520 0.4625 0.4703 0.4593 0.3927 0.4113 0.4132 0.3944 85 0.4468 0.4562 0.4646 0.4546 0.4077 0.4260 0.4280 0.4095 83 0.4546 0.4646 0.4729 0.4625 0.4095 0.4280 0.4299 0.4113 86 0.4373 0.4468 0.4546 0.4446 0.3893 0.4077 0.4095 0.3910 Notes for Table 9: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 19 Color Bin Structure, Continued MXCx-PW27-xxxx 1/9th Color Bin Structure 0.450 N O O R L D O ER N G A E B R LE 0.440 0.430 8J CIE 1931y 0.420 8F 8E 0.410 8D 8G 8H 0.400 8L 8M 0.390 8K 2580K 2870K 0.380 0.370 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CIE 1931 x Figure 13. ANSI 2700K 1/9th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 10. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.70° 2700K Single 5-step MacAdam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.70° Notes for Table 10: 1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 20 Color Bin Structure, Continued MXCx-PW30-xxxxx 1/6th Color Bin Structure 0.445 N O O R L D O ER N G A E B R LE 0.435 0.425 71 0.415 73 75 y 0.405 0.395 3000K 72 74 76 2870K 0.385 3200K 0.375 0.365 0.405 0.410 0.415 0.420 0.425 0.430 0.435 x 0.440 0.445 0.450 0.455 0.460 0.465 Figure 14. ANSI 3000K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 11. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW30-xxxx Emitter Bin Code x y Bin Code x y 71 0.4386 0.4474 0.4562 0.4468 0.4048 0.4228 0.4260 0.4077 74 0.4222 0.4305 0.4386 0.4298 0.3840 0.4019 0.4048 0.3867 72 0.4298 0.4386 0.4468 0.4373 0.3867 0.4048 0.4077 0.3893 75 0.4223 0.4299 0.4387 0.4305 0.3990 0.4165 0.4197 0.4019 73 0.4305 0.4387 0.4474 0.4386 0.4019 0.4197 0.4228 0.4048 76 0.4147 0.4223 0.4305 0.4222 0.3814 0.3990 0.4019 0.3840 Notes for Table 11: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 21 Color Bin Structure, Continued MXCx-PW30-xxxxx 1/9th Color Bin Structure 0.445 N O O R L D O ER N G A E B R LE 0.435 0.425 7K CIE 1931 y 0.415 7J 7E 7F 0.405 7D 0.395 7M 7H 7L 2870K 0.385 0.375 7G 3200K 0.365 0.4050.410 0.415 0.420 0.4250.430 0.435 0.4400.445 0.450 0.455 0.4600.465 CIE 1931 x Figure 15. ANSI 3000K 1/9th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 12. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 3000K Single 3-step MacAdam ellipse (0.4338, 0.403) 3000K Single 5-step MacAdam ellipse (0.4338, 0.403) 0.00834 0.00408 53.22° 0.01390 0.00680 53.22° Notes for Table 12: 1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 22 Color Bin Structure, Continued MXCx-PW35-xxxxx 1/6th Color Bin Structure 0.430 N O O R L D O ER N G A E B R LE 0 420 0.420 0.410 61 63 0.400 y 65 0.390 3500K 62 64 0.380 3250K 66 0.370 3750K 0.360 0.380 0.385 0.390 0.395 0.400 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 x Figure 16. ANSI 3500K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 13. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW35-xxxx Emitter Bin Code x y Bin Code x y 61 0.4130 0.4198 0.4299 0.4223 0.3944 0.4115 0.4165 0.3990 64 0.3975 0.4036 0.4130 0.4061 0.3731 0.3898 0.3944 0.3773 62 0.4061 0.4130 0.4223 0.4147 0.3773 0.3944 0.3990 0.3814 65 0.3943 0.3996 0.4097 0.4036 0.3853 0.4015 0.4065 0.3898 63 0.4036 0.4097 0.4198 0.4130 0.3898 0.4065 0.4115 0.3944 66 0.3889 0.3943 0.4036 0.3975 0.3690 0.3853 0.3898 0.3731 Notes for Table 13: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 23 Color Bin Structure, Continued MXCx-PW35-xxxxx 1/9th Color Bin Structure 0.420 N O O R L D O ER N G A E B R LE 0.410 6K 0.400 6E y 6F 6J 6D 0.390 6G 6H 0.380 6L 6M 3250K 0.370 3750K 0.360 0.380 0.390 0.400 0.410 0.420 0.430 0.440 x Figure 17. ANSI 3500K 1/9th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 14. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 3500K Single 5-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 53.22° 0.01545 0.00690 53.22° Notes for Table 14: 1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 24 Color Bin Structure, Continued MXCx-PW40-xxxx 1/6th Color Bin Structure 0.420 N O O R L D O ER N G A E B R LE 0.410 0.400 51 0.390 53 y 55 0.380 4000K 52 54 0.370 3750K 56 0.360 4250K 0.350 0.340 0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410 x Figure 18. ANSI 4000K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 15. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW40-xxxxx Emitter Bin Code x y Bin Code x y 51 0.3869 0.3916 0.4006 0.3952 0.3829 0.3987 0.4044 0.3880 54 0.3746 0.3786 0.3869 0.3822 0.3624 0.3777 0.3829 0.3670 52 0.3822 0.3869 0.3952 0.3898 0.3670 0.3829 0.3880 0.3716 55 0.3703 0.3736 0.3826 0.3786 0.3726 0.3874 0.3931 0.3777 53 0.3786 0.3826 0.3916 0.3869 0.3777 0.3931 0.3987 0.3829 56 0.3670 0.3703 0.3786 0.3746 0.3578 0.3726 0.3777 0.3624 Notes for Table 15: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 25 Color Bin Structure, Continued MXCx-PW40-xxxx 1/9th Color Bin Structure 0.420 N O O R L D O ER N G A E B R LE 0.410 0.400 CIE 1931 y 0.390 5K 5F 5J 0.380 5E 5D 5G 0.370 5L 5H 3750K 5M 0.360 4250K 0.350 0.340 0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410 CIE 1931 x Figure 19. ANSI 4000K 1/9th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 16. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.72° 0.01565 0.00670 53.72° Notes for Table 16: 1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 26 Color Bin Structure, Continued MXCx-PW50-xxxx 1/6th Color Bin Structure 0.390 N O O R L D O ER N G A E B R LE 0 380 0.380 0.370 31 33 0.360 35 y 5000K 32 0.350 34 4750K 36 0.340 5250K 0.330 0.320 0.325 0.330 0.335 0.340 0.345 0.350 0.355 0.360 0.365 x Figure 20. ANSI 5000K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 17. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW50-xxxx Emitter Bin Code x y Bin Code x y 31 0.3479 0.3493 0.3551 0.3533 0.3580 0.3712 0.3760 0.3624 34 0.3416 0.3425 0.3479 0.3465 0.3408 0.3536 0.3580 0.3448 32 0.3465 0.3479 0.3533 0.3515 0.3448 0.3580 0.3624 0.3487 35 0.3371 0.3376 0.3434 0.3425 0.3493 0.3616 0.3664 0.3536 33 0.3425 0.3434 0.3493 0.3479 0.3536 0.3664 0.3712 0.3580 36 0.3366 0.3371 0.3425 0.3416 0.3369 0.3493 0.3536 0.3408 Notes for Table 17: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 27 Color Bin Structure, Continued MXCx-PW50-xxxx 1/9th Color Bin Structure 0.390 N O O R L D O ER N G A E B R LE 0.380 3K 0.370 3F 3J CIE 1931 y 0.360 3E 3G 3D 0.350 3L 3H 4750K 3M 0.340 5250K 0.330 0.320 0.325 0.330 0.335 0.340 0.345 x 0.350 0.355 0.360 0.365 Figure 21. ANSI 5000K 1/9th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 18. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 5000K Single 5-step MacAdam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.62° 0.01370 0.00590 59.62° Notes for Table 18: 1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 28 Color Bin Structure, Continued MXCx-PW57-xxxxx 1/6th Color Bin Structure 0.370 N O O R L D O ER N G A E B R LE 0.360 21 0.350 23 25 y 0.340 5700K 22 24 5250K 26 0.330 6000K 0.320 0.310 0.310 0.315 0.320 0.325 0.330 x 0.335 0.340 0.345 0.350 Figure 22. ANSI 5700K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 19. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW57-xxxxx Emitter Bin Code x y Bin Code x y 21 0.3319 0.3320 0.3376 0.3371 0.3446 0.3565 0.3616 0.3493 24 0.3270 0.3267 0.3319 0.3318 0.3285 0.3399 0.3446 0.3327 22 0.3318 0.3319 0.3371 0.3366 0.3327 0.3446 0.3493 0.3369 25 0.3215 0.3207 0.3263 0.3267 0.3353 0.3462 0.3513 0.3399 23 0.3267 0.3263 0.3320 0.3319 0.3399 0.3513 0.3565 0.3446 26 0.3222 0.3215 0.3267 0.3270 0.3243 0.3353 0.3399 0.3285 Notes for Table 19: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 29 Color Bin Structure, Continued MXCx-PW57-xxxxx 1/9th Color Bin Structure 0.370 N O O R L D O ER N G A E B R LE 0.360 2K 0.350 2F 2J y 2E 0.340 2D 2G 2L 5250K 2H 0.330 2M 6000K 0.320 0.310 0.310 0.315 0.320 0.325 0.330 0.335 0.340 0.345 0.350 x Figure 23. ANSI 5700K 1/9th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 20. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 5700K Single 3-step MacAdam ellipse (0.3287, 0.3417) 0.00746 0.00320 59.09° 5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.09° Notes for Table 20: 1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 30 Color Bin Structure, Continued MXCx-PW65-xxxxx 1/6th Color Bin Structure 0.365 N O O R L D O ER N G A E B R LE 0 355 0.355 0.345 11 0.335 13 y 15 6500K 0.325 12 6000K 14 16 0.315 7000K 0.305 0.295 0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335 x Figure 24. ANSI 6500K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 21. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW65-xxxxx Emitter Bin Code x y 11 0.3158 0.3146 0.3206 0.3213 0.3317 0.3422 0.3481 0.3371 12 0.3170 0.3158 0.3213 0.3221 0.3212 0.3317 0.3371 0.3261 13 0.3103 0.3087 0.3146 0.3158 0.3263 0.3363 0.3422 0.3317 Bin Code x y 14 0.3119 0.3103 0.3158 0.3170 0.3162 0.3263 0.3317 0.3212 15 0.3048 0.3028 0.3087 0.3103 0.3209 0.3304 0.3363 0.3263 16 0.3068 0.3048 0.3103 0.3119 0.3113 0.3209 0.3263 0.3162 Notes for Table 21: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 31 Color Bin Structure, Continued MXCx-PW65-xxxxx 1/9th Color Bin Structure 0.365 N O O R L D O ER N G A E B R LE 0.355 0.345 CIE 1931 y 1K 1F 0.335 1J 1E 0.325 1D 1G 1L 6000K 1H 1M 0.315 7000K 0.305 0.295 0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335 x Figure 25. ANSI 6500K 1/9th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 22. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 6500K Single 3-step MacAdam ellipse (0.3123, 0.3282) 0.00669 0.00285 58.57° 6500K Single 5-step MacAdam ellipse (0.3123, 0.3282) 0.01115 0.00475 58.57° Notes for Table 22: 1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates. DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 32 About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. N O O R L D O ER N G A E B R LE To learn more about our portfolio of light engines, visit lumileds.com. ©2016 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS204 LUXEON 3535 2D Product Datasheet 20160628 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.