J M X- 9 4 F CH0054070—2000 39×30×17.5 Features Magnet latching relay. Small size, light weight. High sensitivity & reliability. Well anti-shock and anti-vibration. Heavy contact load. Ordering Information JMX-94F A Z 60 DC12V 1 2 3 4 5 1 Part number：JMX-94F 2 Contact arrangement：A:1A；B:1B 3 Enclosure：S: Sealed type；Z: Dust cover 4 Contact Current：40:40A；60:60A；80:80A 5 Coil rated Voltage(V)：DC: 9,12, 24 Contact Data 1ASPSTNO 1BSPSTNC AgCd O 80A/250VAC 60A/250VAC 40A/250VAC 20000VA 15000VA 10000VA 300VAC Max. Switching Current:80A አ50m (at 1A/24VDC) Item 3.12 of IEC255-7 100mV (at rated load) Item 3.12 of IEC255-7 Contact Arrangement Contact Material Contact Rating(resistive) Max. Switching Power Max. Switching Voltage Contact Resistance & Voltage drop Operation life Electrical (Rated load) Mechanical (No load) 104 Item 3.30 of IEC255-7 106 Item 3.31 of IEC255-7 Coil Parameter DASH NUMBERS COIL RATED VOLTAGE VDC COIL RESISTANCE ±10% SWITCHING VOLTAGE VDC (50%-70% of rated voltage) 009-1000 9 81 4.5~6.3 012-1000 12 144 6.0~8.4 024-1000 24 576 12.0~16.8 PULSE MAGNITUDE ms COIL POWER consumption W Operate Time ms Reset Time ms 60 1 20 20 CAUTION: 1.When latching relays are installed in equipment, the latch and reset coil should not be pulsed simultaneously. coil should not be pulsed with less than the nominal coil voltage and pulse width should be a minimum of three times the specified operate time of the relay. If these conditions are not followed, it is possible for the relay to be in the magnetically neutral position . 2.Switching voltage is for test purpose only and are no to be used as design criteria. 151 www.dblectro.com JMX-94F Operation condition Insulation Resistance Dielectric Strength Between contacts Between contact and coil Creepage distance Shock resistance Vibration resistance Terminals strength Solderability Ambient Temperature Relative Humidity Mass 1000M min (at 500VDC) Item 7 of IEC255-5 50Hz 1500V 50Hz 4000V 8.4mm Functional 100m/s2;Survival:1000 m/s2 11ms 10~55Hz Double amplitude 1.5mm 5N 2352 30.5s -25~70 85% (at 40) 33g Item 6 of IEC255-5 Item 6 of IEC255-5 Addenda B of IEC255-5 IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 IEC68-2-3Test Ca Qualification inspection: Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24. Safety approvals Safety approval Load CCEE 80A/220VAC 11 3,5 17,5 Dimensions (Unit: mm) (assistant mounting terminal) 14 5,08 25.4 3-1X0.4 (3-0.6X0.6) 5,5 28 3-Φ1.2 2,5 39 2.5 2.8 11 (10) 0.6 (1.0) 30 25,6 5,08 0.6 (1.0) Mounting (Bottom views) 9 8,5 12 20 Dimensions + NOTES 1).Dimensions are in millimeter. Wiring diagram 2).Inch equivalents are given for general information only. 3).Relays shall have plus(+) signs placed on the circuit diagram as shown. mm 0.4 0.6 1.0 1.2 2.5 2.8 3.5 5.08 5.5 8.5 9 10 11 12 14 17.5 20 25.4 25.6 28 30 39 inch 0.016 0.024 0.039 0.047 0.098 0.110 0.138 0.200 0.217 0.335 0.354 0.394 0.433 0.472 0.551 0.689 0.787 1.000 1.008 1.102 1.181 1.535 Reference Data www.dblectro.com