Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3205010019 Item: DIP05-1B72-19L DIP05-1B66-19L Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact-No. Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacity Special Product Data Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Housing material Connection pins Reach / RoHS conformity Environmental data Typ Min Typ Max Unit Max Unit operating temperature + self heating Conditions Contact data 66/3 Min 66/3 !" #$ $" "% & not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ' ( ) *$ Start Value ' $ , Start Value + ", ) $, ( % !$ $" RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ( ( . Conditions Min according to EN 60255-5 RH <45%, 200 VDC measuring voltage @ 10 kHz Conditions Typ Max Unit / 0 1 epoxy resin CuFe2P, tin plated yes Min Typ Max . Unit Modifications in the sense of technical progress are reserved Designed at: 22.04.04 Designed by: SCHELLHORN Approval at: 25.08.09 Approval by: KOLBRICH Last Change at: 23.05.11 Last Change by: THAUKE Approval at: 26.05.11 Approval by: JHEYDER Version: 2 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3205010019 Item: DIP05-1B72-19L DIP05-1B66-19L Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min 4 4 wave soldering max. 5 sec. Max 5 6 Unit 2 2 3 3 3 fully sealed Conditions General data Typ 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz Min Total weigth Packaging Typ Max 25 pcs per tube Unit 2 Modifications in the sense of technical progress are reserved Designed at: 22.04.04 Designed by: SCHELLHORN Approval at: 25.08.09 Approval by: KOLBRICH Last Change at: 23.05.11 Last Change by: THAUKE Approval at: 26.05.11 Approval by: JHEYDER Version: 2