Crimping Contact Directly Mounted on Board MDF12,MDF27 Series ■Features 1. Cable Direct Mounting Service Improved The existing cable core soldered directly on the board is remade into the crimping contact, which can enhance the service efficiency and the reliability. ● Achieves pre-soldering fixation according to the board pre-fixed style, and enhances the service efficiency. ● Accepts a load to the cable at the contact, and prevents contact wire cutting. 2. Cable Lateral Unreeling Possible The cable can be unreeled lateral to the board by using the angle type MDF27. 3. Current Capacity Secured Corresponding to Thick Cable The cable size corresponds to AWG22 to 14, while AWG14 secures 15A current capacity. In addition, since the contacts are provided corresponding to UL1007 and UL1015 jackets, the contact can be chosen according to applications. ■Applications Various kinds of electronic equipment power supplies, etc. B194 ■Product Specifications Current rating AWG 14 : 15A Note 1 AWG 16 : 10A AWG 18 : 9A Rating AWG 20 : 5A AWG 22 : 5A Voltage rating 300V AC Item Operating Temperature Range -35 to +85ç(Note 2) Operating Moisture Range -20 to 80% Storage Temperature Range -10 to +60ç Storage Moisture Range -40 to 70% Specification Condition 1. Contact Resistance 15m ohms max. 100mA 2. Vibration No damage, cracks, or parts looseness. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 3. Humidity (Steady state) No damage, cracks, or parts looseness. 96 hours at temperature of 40ç and humidity of 90% to 95% 4. Temperature Cycle No damage, cracks, or parts looseness. (-55ç: 30 minutes-> 5 to 35ç: 10 minutes-> 85ç: 30 minutes-> 5 to 35ç: 10 minutes) 5cycles 5. Resistance to Soldering heat No deformation of components affecting performance. Flow: 250ç for 10 seconds Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Material Product Part Material Finish Crimping Contact for Plug Terminal Brass Tin plated Note : The whisker method is implemented for the tin plating. ■Ordering Information ●Contact MDF 12 A - 1822 PCF q q Series Name: MDF w Series No. 12: Vertical type 27: Horizontal type e Cable Type Blank A : UL1007 w e r t r Applicable Cable Size 1822: AWG18 to 22 1416: AWG14 to 16 t Packaging Type PCF PC : Plug contact / reel : Plug contact / bag : UL1015 B195 ■MDF12 Series Part Number Applicable Cable CL No. AWG MDF120-1822PCF 547-0196-9 MDF120-1822PC 547-0221-4 MDF12A-1822PCF 547-0208-6 MDF12A-1822PC 547-0222-7 MDF120-1416PCF 547-0209-9 MDF120-1416PC 547-0223-0 MDF12A-1416PCF 547-0210-8 MDF12A-1416PC AWG 18 to AWG 22 1.5mm to 2.2mm 2.1mm to 2.9mm AWG 14 to AWG 16 547-0224-2 Packaging Type A Size B Size Jacket Diameter 2.4mm to 2.7mm 2.6mm to 3.6mm 5,000 100 9.4 3.2 11.2 3.6 3,500 100 2,500 100 2,500 100 ●Applicable Board Hole Diameter : Ø1.8+0.1 +0 ●Applicable Board Thickness : 1.6 Note: AWG14-16 ■MDF27 Series Part Number CL No. MDF270-1822PCF 547-0286-0 MDF270-1822PC MDF27A-1822PCF ––––––– 547-0288-5 MDF27A-1822PC ––––––– MDF270-1416PCF 547-0294-8 MDF270-1416PC MDF27A-1416PCF MDF27A-1416PC ––––––– 547-0296-3 ––––––– Applicable Cable AWG AWG 18 to AWG 22 AWG 14 to AWG 16 Jacket Diameter Packaging Type 1.5mm to 5000 2.2mm 100 2.1mm to 3500 2.9mm 100 2.4mm to 2500 2.7mm 100 2.6mm to 2500 3.6mm 100 ●Applicable Board Thickness : 1.6 ●PCB mounting pattern ●Applicable Cable (Tin Plating Annealed Copper Wire) ●Strip Length 3.3 to 4.2mm Conductor Size (Wire Construction) AWG 14 (41 cores./0.25mm) AWG 16 (41 cores./0.254mm) AWG 18 (34 cores./0.18mm) AWG 20 (21 cores./0.18mm) AWG 22 (17 cores./0.16mm) Note: If other cables are used instead of the applicable cable, contact Hirose sales department. B196 BApplicable Crimping Tool Type Applicator Part Number CL No. Applicable Contact AP105-MDF12-1822P 901-4514-0 MDF12 -1822PCF AP105-MDF12A-1822P 901-4515-2 MDF12A-1822PCF AP105-MDF12-1416P –––––––––– MDF12 -1416PCF AP105-MDF12A-1416P 901-4533-4 MDF12A-1416PCF AP105-MDF27-1822P –––––––––– MDF27 -1822PCF AP105-MDF27A-1822P –––––––––– MDF27A-1822PCF AP105-MDF27-1416P –––––––––– MDF27 -1416PCF AP105-MDF27A-1416P –––––––––– MDF27A-1416PCF CM-105 901-0005-4 –––––––––––––– Pres Main Unit Manual Crimping Tool MDF12 -TA1822HC 550-0238-0 MDF12 -1822PC MDF12A-TA1822HC 550-0239-2 MDF12A-1822PC MDF12 -TA1416HC –––––––––– MDF12 -1416PC MDF12A-TA1416HC 550-0237-7 MDF12A-1416PC HT104/MDF27-1822P –––––––––– MDF27 -1822PC MDF27A-TA1822HC –––––––––– MDF27A-1822PC MDF27 -TA1416HC –––––––––– MDF27 -1416PC MDF27A-TA1416HC –––––––––– MDF27A-1416PC Note 1. If a trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any product. Note 2. If products with no CL No. are ordered, consult HRS sales department. BPrecautions 1. Recommended Soldering Condition (DIP) Flow: 250ç for 3 seconds Manual soldering: 290ç for 3 seconds ■ After the soldering process, if a load is applied to the cable where the connector and the cable contains heat, the jacket retaining area will be easily loosened. Be sure to carry out the postsoldering operation after the connector returns to the room temperature. 2. Cleaning Condition Refer to Nylon Connector Use Hand book. Don't use a solvent such as trichloroethane, which degrades the cable jacket.In addition, avoid heat cleaning by solvent. 3. Connection Condition Refer to Nylon Connector Use Hand book. B197