MOTOROLA MC13751 Dual-band upmixer and driver amplifier Datasheet

Order this document by MC13751/D
MC13751
Dual-Band Upmixer and
Driver Amplifier
DUAL–BAND UPMIXER AND
DRIVER AMPLIFIER
The MC13751 is an integrated transmit upmixer and driver amplifier
designed for use in cellular phones. It includes two mixers and two RF step
attenuators. The device is fabricated using Motorola’s Advanced RF
BiCMOS process with the SiGe:C option and is housed in a leadless
QFN–24 package.
•
•
•
SEMICONDUCTOR
TECHNICAL DATA
Total Gain:
22 dB for Low Band
19.5 dB for High Band
Total Current Consumption = 53 mA (Typ)
Available in Tape and Reel, 2500 Units per 12 mm, 7 inch Reel
(Scale 2:1)
PLASTIC PACKAGE
CASE 1307
(QFN–24, Tape and Reel Only)
ORDERING INFORMATION
Device
MC13751FCR2
Device Marking
Package
MC751
QFN–24
Simplified Block Diagram
High Band High Band
Mix Out
DRV In
High Band IF+
High Band IF-
High Band RF Out
LO+
LO-
Gain Control
Low Band IF+
Low Band IF-
Low Band RF Out
Low Band Low Band
Mix Out
DRV In
Band Select
Enable
This device contains 223 active transistors.
Definitive Data – Motorola reserves the right to change the Production detail specifications as
may be required to permit improvement in the design of its products.
MOTOROLA RF PRODUCTS DEVICE DATA
 Motorola, Inc. 2002
Rev. 1
1
MC13751
CONTACT CONNECTIONS
VCC MixOut
High High
Gain
DRV In
Gnd Band Band Gnd Control High Band
24
23
22
21
20
19
IF+ High Band
18 Gnd
1
17 RF Out High Band
IF- High Band 2
16 Enable
LO+ 3
LO-
4
15 Band Select
IF- Low Band
5
14 RF Out Low Band
IF+ Low Band
6
13 Gnd
7
Gnd
8
9
10
VCC MixOut Gnd
Low Low
Band Band
11
12
Gnd DRV In
Low Band
MAXIMUM RATINGS
Symbol
Value
Unit
VCC
3.6
V
LO Input Power
0
dBm
IF Input Level
0
dBm
–30 to 85
°C
Rating
Supply Voltage
Operating Temperature Range
TA
NOTES: 1. Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the limits in the Electrical Characteristics tables.
2. ESD (electrostatic discharge) immunity meets Human Body Model (HBM) ≤250 V and
Machine Model (MM) ≤25 V. Additional ESD data available upon request.
DC ELECTRICAL CHARACTERISTICS
Characteristic
Min
Typ
Max
Unit
2.7
2.78
2.86
V
–
53
64
mA
Enable
Inactive State
Active State
–
1.6
–
–
0.6
–
Band
800 MHz Enabled
1900 MHz Enabled
–
1.6
–
–
0.6
–
–
–
25
1.6
–
–
–
–
0.6
–
–
10
Supply Voltage
Power Supply Current
Power Down State Leakage Current (0.2 V Logic Levels)
Gain Select Voltage
Gain High = 1
Gain Low = 0
Gain Select (enable and band signals current)
2
Symbol
V
V
µA
V
µA
MOTOROLA RF PRODUCTS DEVICE DATA
MC13751
ELECTRICAL CHARACTERISTICS
Characteristic
Conditions
Symbol
Min
Typ
Max
Unit
IF Frequency
Low Band
High Band
150
150
178
213
250
250
LO Frequency Range
Low Band
High Band
1002
2028
–
–
1029
2125
RF Frequency Range
Low Band
High Band
824
1850
–
–
849
1910
IF Input Level, Both Bands (differential, typ –7.0 dBm)
–60
–
0
dBm
LO Input Level, Both Bands (differential)
–12
–10
–8.0
dBm
RF GMSK Output Level
Both Bands
Both Bands, Low Gain
10
6.0
–
–
–
–
RF Linear Output Level, TDMA
Both Bands
Both Bands, Low Gain
6.0
2.0
–
–
–
–
ACP
@ f ±30 kHz, TDMA
@ f ±60 kHz, TDMA
@ f ±200 kHz, GSM
@ f ±400 kHz, GSM
–32
–51
–36
–66
–
–
–
–
–
–
–
–
Conversion Gain Mixer
Low Band
High Band
6.3
6.5
8.3
8.5
10.3
10.5
Gain, Driver, High Gain
Low Band
High Band
11.7
9.0
13.7
11
15.7
13
Gain, Drivers, Low Gain
Low Band
High Band
7.7
5.0
9.7
7.0
11.7
9.0
Noise Figure
Mixer (SSB)
Drivers
–
–
11
5.0
14
8.0
IF Impedance (differential)
–
200
–
Ω
LO Impedance (differential)
–
100
–
Ω
RF Impedance (Both Bands @ Mixer (rf out, driver rf in
and driver rf out))
–
50
–
Ω
Min
Typ
Max
Unit
LO Leakage to RF Port (Both bands, Pout = 6.0 dBm)
–
–
–20
dBc
IF Leakage to RF Port (Both bands)
–
–
–50
dBc
Image Supression (Both bands)
–
–
–20
dBc
2x Image Supression (Both bands)
–
–
–40
dBc
LO – 2x IF (Both bands)
–
–
–30
dBc
2x LO – 7x IF (Low band)
–
–
–40
dBc
5 * IF (Low band)
–
–
–80
dBc
11 * IF (Low band)
–
–
–80
dBc
MHz
MHz
MHz
dBm
dBm
dBc
dBc
dBc
dBc
dB
SPURIOUS (measured with interstage filter)
Characteristic
MOTOROLA RF PRODUCTS DEVICE DATA
Symbol
3
MC13751
OUTLINE DIMENSIONS
PLASTIC PACKAGE
CASE 1307–01
(QFN–24)
ISSUE B
PIN 1
INDEX AREA
0.1 C
M
2X
4
A
0.1 C
0.1 C
G
2X
1.0 1.00
0.8 0.75
4
0.05
0.00
DETAIL G
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS.
2. INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M, 1994.
3. THE COMPLETE JEDEC DESIGNATOR FOR THIS
PACKAGE IS: HF-PQFP-N.
4. CORNER CHAMFER MAY NOT BE PRESENT.
DIMENSIONS OF OPTIONAL FEATURES ARE FOR
REFERENCE ONLY.
5. CORNER LEADS CAN BE USED FOR THERMAL
OR GROUND AND ARE TIED TO THE DIE ATTACH
PAD. THESE LEADS ARE NOT INCLUDED IN THE
LEAD COUNT.
6. COPLANARITY APPLIES TO LEADS, CORNER
LEADS, AND DIE ATTACH PAD.
7. FOR ANVIL SINGULATED QFN PACKAGES,
MAXIMUM DRAFT ANGLE IS 12°.
EXPOSED DIE
ATTACH PAD
24
18
1
13
6
2.25
1.95
0.1 C A B
N
12
0.5
0.3
SEATING PLANE
DETAIL M
PIN 1 IDENTIFIER
2.25
1.95
0.25
24X
C
VIEW ROTATED 90 ° CLOCKWISE
B
19
6
(0.24)
(0.5)
M
0.1 C A B
0.05 C
7
24X
VIEW M–M
0.5
20X
0.30
0.18
0.1
M
C A B
0.05
M
C
(45 ° )
°
(90 )
DETAIL T
(0.25)
24X
0.065
0.015
2X 0.39
0.31
(1.227)
2X 0.1
0.0
DETAIL N
PREFERRED CORNER CONFIGURATION
DETAIL T
DETAIL M
PREFERRED PIN 1 BACKSIDE IDENTIFIER
PREFERRED PIN 1 BACKSIDE IDENTIFIER
4
(45 ° )
°
2X 0.39
0.31
(0.4)
(0.18)
0.60
0.24
DETAIL N
CORNER CONFIGURATION OPTION
4
4
(90 )
DETAIL S
0.60
0.24
0.1 MIN
DETAIL M
PIN 1 BACKSIDE IDENTIFIER OPTION
DETAIL S
PIN 1 BACKSIDE IDENTIFIER OPTION
5
MOTOROLA RF PRODUCTS DEVICE DATA
MC13751
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
MOTOROLA and the
logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners.
E Motorola, Inc. 2002
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution;
P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447
Technical Information Center: 1–800–521–6274
JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3–20–1,
Minami–Azabu. Minato–ku, Tokyo 106–8573 Japan. 81–3–3440–3569
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre,
2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
852–26668334
HOME PAGE: http://www.motorola.com/semiconductors/
◊
MOTOROLA RF PRODUCTS DEVICE DATA
MC13751/D
5
Similar pages