CHENDA MDDCD6S Single phase glass passivated bridge rectifier Datasheet

CD2S THRU CD10S
SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIERS
Voltage Range - 200 to 1000 Volts Current - 1.0 Ampere
Features:
Bridge Rectifier Datasheet
™
™
™
™
™
1A , 200 - 1000V
Glass passivated junction
Ideal for printed circuit board
Thin body, flat lead
High
temperature
soldering
guaranteed: 260 ℃ /10seconds/
These are powerful bridge rectifiers with
enhanced Glass Passivated Junction P-N
chips. They are advanced rectifiers designed,
tested and guaranteed to withstand a specified
level of energy in the forward mode of
0.375”(9.5mm)
operation. All of these rectifiers are designed
for applications such as,switching convertors. ™ Leads solderable per
MIL-STD-202,Method 208
They have the low negative leakage and low
™
High
reliability under 125℃
forward voltage drop, which allows these types
working environment, with the
to be operated directly from integrated circuits.
limit temperature 150℃
CDS
~
D4
D1
+
D3
~
AC1
D2
-
+
AC2
Outline Drawing : Dimensions in inches(millimeters)
http://www.microdiode.com
Based on MIL-STD-105E LEVEL II , set the acceptable level as below.
Item
Critical
Major
Minor
0.10(Electrical)
AQL(%)
0.01
0.25(Physical)
1.00
Signification , Storage and Shipment
1. The signification on the bridge rectifier body can be determined by customer.
It will be 100% followed up as the instruction from customer.
2. The parts will be packed in the boxes, and the quantity in one box can be
offered by customer. The boxes will be delivered by internal express company.
3. Please keep the parts being stored in the environment with humidity lower
than 75%.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load, for capacitive load derate current by 20%.
SYMBOLS
MDD
CD2S
MDD
CD4S
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
VRRM
VRMS
VDC
200
140
200
400
280
400
Maximum average forward rectified current
at TA=75
IF(AV)
1.0
Amps
IFSM
35
Amps
VF
1.0
Volts
5.0
50
15
30
-55 to +150
-55 to +150
uA
uA
MDD Catalog Number
Peak forward surge current,
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Maximum instantaneous forward voltage drop
per leg at 0.4A
Maximum DC reverse current
TA=25
at rated DC blocking voltage
TA=75
Typical junction capactiance per leg(Note)
Typical thermal resistance per leg
Operating temperature range
storage temperature range
IR
CJ
R JA
TJ
TSTG
NOTES: Measured at 1.0MHz and applied reverse voltage of 4.0 volts.
MDD
CD6S
600
420
600
MDD
CD8S
MDD
CD10S
UNITS
800
560
800
1000
700
1000
VOLTS
VOLTS
VOLTS
pF
/W
RATINGS AND CHARACTERISTIC CURVES CD2S THRU CD10S
Typical Performance Curves
Tc = 25℃, unless otherwise specified
The cruve graph is for reference only, can't be the basis for judgment(曲线图仅供参考)!
Similar pages