Hittite HMC452ST89 Ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz Datasheet

HMC452ST89 / 452ST89E
v02.0710
AMPLIFIERS - LINEAR & POWER - SMT
9
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Typical Applications
Features
The HMC452ST89 / HMC452ST89E is ideal for
applications requiring a high dynamic range amplifier:
Output IP3: +49 dBm
• GSM, GPRS & EDGE
9 dB Gain @ 2100 MHz
• CDMA & W-CDMA
50% PAE @ +31 dBm Pout
• CATV/Cable Modem
• Fixed Wireless
+25 dBm CDMA2000 Channel Power
@ -45 dBc ACP
Included in the HMC-DK002 Designer’s Kit
Functional Diagram
General Description
21 dB Gain @ 400 MHz
The HMC452ST89 & HMC452ST89E are high
dynamic range GaAs InGaP HBT 1 Watt MMIC power
amplifiers operating from 0.4 to 2.2 GHz and packaged
in industry standard SOT89 packages. Utilizing a
minimum number of external components and a single
+5V supply, the amplifier output IP3 can be optimized
to +45 dBm at 0.4 GHz or +49 dBm at 2.1 GHz. The
high output IP3 and PAE make the HMC452ST89 &
HMC452ST89E ideal power amplifiers for Cellular/
PCS/3G and Fixed Wireless applications.
Electrical Specifi cations, TA = +25°C, Vs= +5V [1]
Parameter
Min.
Frequency Range
Gain
Typ.
Max.
Min.
400 - 410
19
Gain Variation Over
Temperature
21
0.012
Typ.
Max.
Min.
450 - 496
18
0.02
20
0.012
Typ.
Max.
Min.
810 - 960
13.5
0.02
15.5
0.012
Typ.
Max.
Min.
1710 - 1990
7
0.02
9.5
0.012
Typ.
Max.
Units
2010 - 2170
MHz
9
dB
7
0.02
0.012
0.02
dB /
°C
Input Return Loss
22
16
13
13
20
dB
Output Return Loss
11
11
14
15
15
dB
31.5
dBm
32
dBm
49
dBm
Output Power for
1dB
Compression (P1dB)
27
Saturated Output
Power (Psat)
Output Third Order
Intercept (IP3) [2]
30
27
30.5
42
45
30
27.5
30.5
42
45
30.5
28
31.5
44
47
31
28.5
31.5
45
48
46
Noise Figure
6.5
7
6.5
6.5
6.5
dB
Supply Current (Icq)
510
510
510
510
510
mA
[1] Specifications and data reflect HMC452ST89 measured using the respective application circuits for each designated frequency band found
herein. Contact the HMC Applications Group for assistance in optimizing performance for your application.
[2] Two-tone input power of 0 dBm per tone, 1 MHz spacing.
9 - 124
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
& Return Loss @ 400 MHz
Gain vs. Temperature @ 400 MHz
25
24
23
20
22
21
20
S21
S11
S22
5
0
18
+25 C
15
+85 C
-40 C
14
-10
13
0.2
0.3
0.4
0.5
0.6
12
0.35
0.7
0.37
0.39
0.41
FREQUENCY (GHz)
Input Return Loss
vs. Temperature @ 400 MHz
Output Return Loss
vs. Temperature @ 400 MHz
0
0
-5
-2
-10
RETURN LOSS (dB)
RETURN LOSS (dB)
FREQUENCY (GHz)
+25 C
+85 C
-40 C
-15
-20
-25
-30
-35
0.35
-4
0.45
0.43
0.45
-8
-10
-12
-14
0.37
0.39
0.41
0.43
-16
0.35
0.45
0.37
33
32
32
31
31
Psat (dBm)
34
33
30
29
28
+25 C
+85 C
-40 C
26
0.41
Psat vs. Temperature @ 400 MHz
34
27
0.39
FREQUENCY (GHz)
P1dB vs. Temperature @ 400 MHz
P1dB (dBm)
0.43
+25 C
+85 C
-40 C
-6
FREQUENCY (GHz)
30
29
28
+25 C
+85 C
27
-40 C
26
25
24
0.35
9
17
16
-5
-15
0.1
19
AMPLIFIERS - LINEAR & POWER - SMT
10
GAIN (dB)
RESPONSE (dB)
15
25
0.37
0.39
0.41
FREQUENCY (GHz)
0.43
0.45
24
0.35
0.37
0.39
0.41
0.43
0.45
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
9 - 125
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Output IP3 vs. Temperature @ 400 MHz
10
48
9
46
8
NOISE FIGURE (dB)
50
42
40
+25 C
+85 C
38
-40 C
36
6
5
4
2
1
0.37
0.39
0.41
0.43
+25 C
+85 C
-40 C
3
32
0
0.35
0.45
0.37
0.39
FREQUENCY (GHz)
+25 C
+85 C
-40 C
-15
-20
-25
0.37
0.39
0.41
0.43
0.45
FREQUENCY (GHz)
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
ISOLATION (dB)
-5
-30
0.35
0.43
0.45
Gain, Power & IP3
vs. Supply Voltage @ 400 MHz
0
-10
0.41
FREQUENCY (GHz)
Reverse Isolation
vs. Temperature @ 400 MHz
50
45
40
35
30
25
20
Gain
P1dB
15
10
4.5
4.75
Psat
OIP3
5
5.25
5.5
Vs (Vdc)
ACPR vs. Supply Voltage @ 400 MHz
W-CDMA, 64 DPCH
Power Compression @ 400 MHz
55
-10
-15
50
45
-20
Pout
Gain
PAE
40
W-CDMA
Frequency: 400 MHz
Integration BW: 3.84 MHz
64 DPCH
-25
ACPR (dBc)
35
30
25
20
-30
-35
4.5V
5V
-40
5.5V
-45
-50
15
-55
10
-60
5
-65
0
-70
0
2
4
6
8
10
INPUT POWER (dBm)
9 - 126
7
34
30
0.35
Pout (dBm), Gain (dB), PAE (%)
AMPLIFIERS - LINEAR & POWER - SMT
OIP3 (dBm)
44
9
Noise Figure
vs. Temperature @ 400 MHz
12
14
16
Source ACPR
8
10
12
14
16
18
20
22
24
26
28
Channel Power (dBm)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
& Return Loss @ 470 MHz
Gain vs. Temperature @ 470 MHz
25
23
20
22
21
20
S21
S11
S22
10
5
GAIN (dB)
0
19
18
17
16
-5
-10
14
-15
-20
0.1
9
+25 C
+85 C
-40 C
15
13
0.2
0.3
0.4
0.5
0.6
12
0.43
0.7
0.45
0.47
0.49
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss
vs. Temperature @ 470 MHz
Output Return Loss
vs. Temperature @ 470 MHz
0.51
0.53
0.51
0.53
0
0
-2
RETURN LOSS (dB)
RETURN LOSS (dB)
-5
+25 C
+85 C
-40 C
-10
-15
-4
+25 C
+85 C
-40 C
-6
-8
-10
-12
-20
-14
-25
0.43
0.45
0.47
0.49
0.51
-16
0.43
0.53
0.45
34
34
33
33
32
32
31
31
30
29
+25 C
+85 C
27
29
28
+25 C
+85 C
-40 C
26
25
24
0.43
30
27
-40 C
26
0.49
Psat vs. Temperature @ 470 MHz
Psat (dBm)
P1dB (dBm)
P1dB vs. Temperature @ 470 MHz
28
0.47
FREQUENCY (GHz)
FREQUENCY (GHz)
AMPLIFIERS - LINEAR & POWER - SMT
RESPONSE (dB)
15
25
0.45
0.47
0.49
FREQUENCY (GHz)
0.51
0.53
24
0.43
0.45
0.47
0.49
0.51
0.53
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
9 - 127
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Output IP3 vs. Temperature @ 470 MHz
10
48
9
46
8
NOISE FIGURE (dB)
50
42
40
+25 C
+85 C
38
-40 C
36
6
5
3
2
1
0.45
0.47
0.49
0.51
+25 C
+85 C
-40 C
4
32
0
0.43
0.53
0.45
0.47
FREQUENCY (GHz)
-15
-40 C
-20
-25
-30
-35
0.2
0.25
0.3
0.35
0.4
0.45
0.5
0.55
0.6
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
ISOLATION (dB)
-5
+25 C
+85 C
45
Gain
P1dB
Psat
OIP3
40
35
30
25
20
15
10
4.5
4.75
5
-10
50
-15
-20
Pout
W-CDMA
Frequency: 470 MHz
Integration BW: 3.84 MHz
64 DPCH
-25
ACPR (dBc)
Gain
PAE
30
25
20
-30
-35
-40
4.5V
-45
5V
5.5V
-50
15
-55
10
-60
5
-65
0
-70
2
4
6
5.5
ACPR vs. Supply Voltage @ 470 MHz
W-CDMA, 64 DPCH
55
35
5.25
Vs (Vdc)
Power Compression @ 470 MHz
40
0.53
50
FREQUENCY (GHz)
45
0.51
Gain, Power & IP3
vs. Supply Voltage @ 470 MHz
0
-10
0.49
FREQUENCY (GHz)
Reverse Isolation
vs. Temperature @ 470 MHz
0
8
10
INPUT POWER (dBm)
9 - 128
7
34
30
0.43
Pout (dBm), Gain (dB), PAE (%)
AMPLIFIERS - LINEAR & POWER - SMT
OIP3 (dBm)
44
9
Noise Figure
vs. Temperature @ 470 MHz
12
14
16
Source ACPR
8
10
12
14
16
18
20
22
24
26
28
Channel Power (dBm)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
& Return Loss @ 900 MHz
Gain vs. Temperature @ 900 MHz
20
18
15
17
16
15
5
GAIN (dB)
RESPONSE (dB)
10
S21
S11
S22
0
-5
14
13
+25 C
+85 C
-40 C
12
11
9
-10
10
-15
9
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
8
0.7
1.4
0.75
0.8
0.85
0.9
0.95
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss
vs. Temperature @ 900 MHz
Output Return Loss
vs. Temperature @ 900 MHz
RETURN LOSS (dB)
RETURN LOSS (dB)
-5
-10
-15
-20
+25 C
+85 C
-40 C
-25
0.75
0.8
0.85
0.9
0.95
1
1.05
1
1.05
1.1
1.05
1.1
-10
-15
-20
0.7
1.1
0.75
0.8
33
32
32
31
31
Psat (dBm)
34
33
30
29
+25 C
+85 C
27
0.95
30
29
+25 C
+85 C
28
-40 C
27
-40 C
26
0.9
Psat vs. Temperature @ 900 MHz
34
28
0.85
FREQUENCY (GHz)
P1dB vs. Temperature @ 900 MHz
P1dB (dBm)
1.1
+25 C
+85 C
-40 C
-5
FREQUENCY (GHz)
26
25
24
0.7
1.05
0
0
-30
0.7
1
AMPLIFIERS - LINEAR & POWER - SMT
-20
0.4
25
0.75
0.8
0.85
0.9
0.95
FREQUENCY (GHz)
1
1.05
1.1
24
0.7
0.75
0.8
0.85
0.9
0.95
1
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
9 - 129
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Output IP3 vs. Temperature @ 900 MHz
10
48
9
46
8
NOISE FIGURE (dB)
50
42
40
38
+25 C
+85 C
-40 C
36
6
5
4
3
2
32
1
0.8
0.85
0.9
0.95
1
1.05
+25 C
+85 C
-40 C
0
0.7
1.1
0.75
0.8
0.85
FREQUENCY (GHz)
+25 C
+85 C
-40 C
-20
-25
-30
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
ISOLATION (dB)
-5
-15
0.95
1
1.05
1.1
Gain, Power & IP3
vs. Supply Voltage @ 900 MHz
0
-10
0.9
FREQUENCY (GHz)
Reverse Isolation
vs. Temperature @ 900 MHz
50
45
40
35
30
Gain
P1dB
25
Psat
OIP3
20
15
10
4.5
4.75
5
5.25
5.5
Vs (Vdc)
FREQUENCY (GHz)
ACPR vs. Supply Voltage @ 910 MHz
CDMA IS95, 9 Channels Forward
Power Compression @ 900 MHz
55
-10
50
-15
-20
45
Pout
40
ACPR (dBc)
35
CDMA IS95
Frequency: 910 MHz
Integration BW: 1.228 MHz
Forward Link, 9 Channels
-25
Gain
PAE
30
25
20
-30
-35
-40
4.5V
-45
5V
-50
15
-55
10
-60
5
-65
0
-70
4
6
8
10
12
14
16
INPUT POWER (dBm)
9 - 130
7
34
30
0.75
Pout (dBm), Gain (dB), PAE (%)
AMPLIFIERS - LINEAR & POWER - SMT
OIP3 (dBm)
44
9
Noise Figure
vs. Temperature @ 900 MHz
18
20
22
5.5V
Source ACPR
8
10
12
14
16
18
20
22
24
26
Channel Power (dBm)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
& Return Loss @ 1900 MHz
Gain vs. Temperature @ 1900 MHz
10
S21
S11
S22
0
GAIN (dB)
RESPONSE (dB)
5
-5
-10
-15
-20
-25
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
13
12
11
10
9
8
7
6
5
4
3
2
1
0
1.7
-40C
1.8
FREQUENCY (GHz)
1.9
2
2.1
2
2.1
FREQUENCY (GHz)
Input Return Loss
vs. Temperature @ 1900 MHz
Output Return Loss
vs. Temperature @ 1900 MHz
0
0
+25 C
+85 C
-5
+25 C
+85 C
-40 C
-5
RETURN LOSS (dB)
RETURN LOSS (dB)
9
+25C
+85C
-40 C
-10
-15
-10
-15
-20
-20
1.7
1.8
1.9
2
-25
1.7
2.1
1.8
Psat vs. Temperature @ 1900 MHz
34
34
33
33
32
32
31
31
Psat (dBm)
P1dB (dBm)
P1dB vs. Temperature @ 1900 MHz
30
29
28
+25 C
+85 C
27
-40 C
26
30
29
+25 C
28
+85 C
27
-40 C
26
25
24
1.7
1.9
FREQUENCY (GHz)
FREQUENCY (GHz)
AMPLIFIERS - LINEAR & POWER - SMT
15
25
1.8
1.9
FREQUENCY (GHz)
2
2.1
24
1.7
1.8
1.9
2
2.1
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
9 - 131
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Output IP3 vs. Temperature @ 1900 MHz
10
50
9
48
8
NOISE FIGURE (dB)
52
44
42
+25 C
40
+85 C
38
-40 C
6
5
4
+25 C
+85 C
34
2
-40 C
32
1
30
1.7
1.8
1.9
2
0
1.7
2.1
1.8
+25 C
ISOLATION (dB)
+85 C
-40 C
-10
-15
1.8
1.9
2
2.1
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
0
-20
1.7
2
2.1
Gain, Power & IP3
vs. Supply Voltage @ 1900 MHz
Reverse Isolation
vs. Temperature @ 1900 MHz
-5
1.9
FREQUENCY (GHz)
FREQUENCY (GHz)
55
50
45
40
35
30
25
Gain
P1dB
Psat
OIP3
20
15
10
5
4.5
4.75
5
5.25
5.5
Vs (Vdc)
FREQUENCY (GHz)
ACPR vs. Supply Voltage @ 1960 MHz
CDMA 2000, 9 Channels Forward
Power Compression @ 1900 MHz
50
-30
45
-35
Pout
Gain
-40
35
PAE
-45
ACPR (dBc)
40
30
25
20
CDMA2000
Frequency: 1.96 GHz
Integration BW: 1.228 MHz
Forward Link, SR1, 9 Channels
-50
4.5V
5V
5.5V
-55
-60
15
-65
10
-70
5
-75
-80
0
10
12
14
16
18
20
Input Power (dBm)
9 - 132
7
3
36
Pout (dBm), Gain (dB), PAE (%)
AMPLIFIERS - LINEAR & POWER - SMT
OIP3 (dBm)
46
9
Noise Figure
vs. Temperature @ 1900 MHz
22
24
26
14
16
18
20
22
24
26
28
Output Channel Power (dBm)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
& Return Loss @ 2100 MHz
Gain vs. Temperature @ 2100 MHz
15
12
11
10
10
9
S21
S11
S22
0
8
GAIN (dB)
RESPONSE (dB)
5
-5
-10
-15
7
6
5
+85 C
-40 C
3
-20
9
+25 C
4
1
-30
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
0
1.9
3
2
FREQUENCY (GHz)
Input Return Loss
vs. Temperature @ 2100 MHz
-10
RETURN LOSS (dB)
RETURN LOSS (dB)
-5
+25 C
+85 C
-40 C
-15
-20
2.2
2.3
+25 C
+85 C
-40 C
-10
-15
-20
-25
2
2.1
2.2
-25
1.9
2.3
2
P1dB vs. Temperature @ 2100 MHz
Psat vs. Temperature @ 2100 MHz
34
33
33
32
32
31
31
Psat (dBm)
34
30
29
28
+25 C
+85 C
-40 C
27
30
29
+85 C
27
-40 C
26
25
25
2.1
FREQUENCY (GHz)
2.2
2.3
+25 C
28
26
2
2.1
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB (dBm)
2.3
0
-5
24
1.9
2.2
Output Return Loss
vs. Temperature @ 2100 MHz
0
-30
1.9
2.1
FREQUENCY (GHz)
AMPLIFIERS - LINEAR & POWER - SMT
2
-25
24
1.9
2
2.1
2.2
2.3
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
9 - 133
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Output IP3 vs. Temperature @ 2100 MHz
10
50
9
48
8
NOISE FIGURE (dB)
52
44
42
40
38
+25 C
+85 C
36
-40 C
6
5
4
32
1
2
2.1
2.2
+25 C
+85 C
3
2
-40 C
0
1.9
2.3
2
+25 C
+85 C
-40 C
ISOLATION (dB)
-10
-15
1.7
1.8
1.9
2
2.1
2.2
2.3
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
0
-20
1.6
2.2
2.3
Gain, Power & IP3
vs. Supply Voltage @ 2100 MHz
Reverse Isolation
vs. Temperature @ 2100 MHz
-5
2.1
FREQUENCY (GHz)
FREQUENCY (GHz)
55
50
45
40
35
30
25
Gain
P1dB
Psat
OIP3
20
15
10
5
4.5
4.75
5
5.25
5.5
Vs (Vdc)
FREQUENCY (GHz)
ACPR vs. Supply Voltage @ 2140 MHz
W-CDMA, 64 DPCH
Power Compression @ 2100 MHz
-20
50
45
40
Gain
PAE
W-CDMA
Frequency: 2.14 GHz
Integration BW: 3.84 MHz
64 DPCH
-30
ACPR (dBc)
35
4.5V
-25
Pout
30
25
20
-35
5V
-40
5.5V
-45
-50
15
-55
10
5
-60
0
-65
Source ACPR
10
12
14
16
18
20
22
Input Power (dBm)
9 - 134
7
34
30
1.9
Pout (dBm), Gain (dB), PAE (%)
AMPLIFIERS - LINEAR & POWER - SMT
OIP3 (dBm)
46
9
Noise Figure
vs. Temperature @ 2100 MHz
24
26
28
12
14
16
18
20
22
24
26
28
OUTPUT CHANNEL POWER (dBm)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Power Dissipation
Absolute Maximum Ratings
POWER DISSIPATION (W)
Max Pdiss @ +85C
2.5
2
1900 MHz
1.5
2100 MHz
Collector Bias Voltage (Vcc)
+6.0 Vdc
RF Input Power (RFIN)(Vs +5Vdc)
+31 dBm
Junction Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 41.5 mW/°C above 85 °C)
2.7 W
Thermal Resistance
(junction to ground paddle)
24.1 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
1
0
5
10
15
20
25
INPUT POWER (dBm)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL:
MOLDING COMPOUND MP-180S OR EQUIVALENT.
2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING.
3. LEAD PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS]
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
9
AMPLIFIERS - LINEAR & POWER - SMT
3
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC452ST89
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC452ST89E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H452
XXXX
[2]
H452
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
9 - 135
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Pin Descriptions
AMPLIFIERS - LINEAR & POWER - SMT
9
Pin Number
Function
Description
1
RFIN
This pin is DC coupled.
Off chip matching components are required.
See Application Circuit herein.
3
RFOUT
RF output and DC Bias input for the output amplifier stage.
Off chip matching components are required.
See Application Circuit herein.
2, 4
GND
These pins & package bottom must be connected to
RF/DC ground.
400 MHz Application Circuit
This circuit was used to specify the performance for 400-410 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
Note: C2 should be placed as close to pins as possible.
Impedance
Recommended Component Values
TL1
TL2
TL3
TL4
TL5
C1
50 Ohm
50 Ohm
50 Ohm
50 Ohm
50 Ohm
C2
15 pF
C3, C4
6.8 pF
Physical Length
0.09”
0.08”
0.17”
0.04”
0.25”
Electrical Length
2°
2°
4°
1°
6°
PCB Material: 10 mil Rogers 4350, Er = 3.48
9 - 136
Interface Schematic
12 pF
C5
39 pF
C6
100 pF
C7
2.2 μF
L1
47 nH
L2
40 nH
L3
4.3 nH
L4
5.1 nH
R1
5.1 Ohm
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
400 MHz Evaluation PCB
List of Materials for Evaluation PCB 110409-400 [1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
2 mm DC Header
C1
12 pF Capacitor, 0402 Pkg.
C2
15 pF Capacitor, 0402 Pkg.
C3, C4
6.8 pF Capacitor, 0402 Pkg.
C5
39 pF Capacitor, 0402 Pkg.
C6
100 pF Capacitor, 0402 Pkg.
C7
2.2 μF Capacitor, Tantalum
L1
47 nH Inductor, 0603 Pkg.
L2
40 nH Inductor, 0402 Pkg.
L3
4.3 nH Inductor, 0402 Pkg.
L4
5.1 nH Inductor, 0402 Pkg.
R1
5.1 Ohm Resistor, 0402 Pkg.
U1
HMC452ST89 / HMC452ST89E
Linear Amp
PCB [2]
110407 Evaluation PCB, 10 mils
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
AMPLIFIERS - LINEAR & POWER - SMT
9
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
9 - 137
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
470 MHz Application Circuit
This circuit was used to specify the performance for 450-496 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 138
Note: C2 should be placed as close to pins as possible.
TL1
TL2
TL3
TL4
TL5
50 Ohm
50 Ohm
50 Ohm
50 Ohm
50 Ohm
C1, C2
12 pF
Physical Length
0.09”
0.08”
0.17”
0.04”
0.25”
C3
6.8 pF
Electrical Length
2.5°
2°
5°
1°
7°
C4
5.6 pF
C5
39 pF
C6
100 pF
C7
2.2 μF
Impedance
PCB Material: 10 mil Rogers 4350, Er = 3.48
Recommended Component Values
L1
47 nH
L2
40 nH
L3
4.7 nH
L4
3.9 nH
R1
5.1 Ohm
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
470 MHz Evaluation PCB
List of Materials for Evaluation PCB 110416-470 [1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
2 mm DC Header
C1, C2
12 pF Capacitor, 0402 Pkg.
C3
6.8 pF Capacitor, 0402 Pkg.
C4
5.6 pF Capacitor, 0402 Pkg.
C5
39 pF Capacitor, 0402 Pkg.
C6
100 pF Capacitor, 0402 Pkg.
C7
2.2 μF Capacitor, Tantalum
L1
47 nH Inductor, 0603 Pkg.
L2
40 nH Inductor, 0402 Pkg.
L3
4.7 nH Inductor, 0402 Pkg.
L4
3.9 nH Inductor, 0402 Pkg.
R1
5.1 Ohm Resistor, 0402 Pkg.
U1
HMC452ST89 / HMC452ST89E
Linear Amp
PCB [2]
110407 Evaluation PCB, 10 mils
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
AMPLIFIERS - LINEAR & POWER - SMT
9
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
9 - 139
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
900 MHz Application Circuit
This circuit was used to specify the performance for 810-960 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 140
Note: C2 should be placed as close to pins as possible.
TL1
TL2
TL3
50 Ohm
50 Ohm
50 Ohm
C1
27 pF
Physical Length
0.21”
0.13”
0.38”
C2
6.8 pF
Electrical Length
11°
7°
20°
C3
2.2 pF
C4
4.7 pF
Impedance
PCB Material: 10 mil Rogers 4350, Er = 3.48
Recommended Component Values
C5
5.6 pF
C6
100 pF
C7
2.2 μF
L1
20 nH
R1
5.1 Ohm
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
900 MHz Evaluation PCB
List of Materials for Evaluation PCB 110384-900 [1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
2 mm DC Header
C1
27 pF Capacitor, 0402 Pkg.
C2
6.8 pF Capacitor, 0402 Pkg.
C3
2.2 pF Capacitor, 0402 Pkg.
C4
4.7 pF Capacitor, 0402 Pkg.
C5
5.6 pF Capacitor, 0402 Pkg.
C6
100 pF Capacitor, 0402 Pkg.
C7
2.2 μF Capacitor, Tantalum
L1
20 nH Inductor, 0402 Pkg.
R1
5.1 Ohm Resistor, 0402 Pkg.
U1
HMC452ST89 / HMC452ST89E
Linear Amp
PCB [2]
110382 Evaluation PCB, 10 mils
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
AMPLIFIERS - LINEAR & POWER - SMT
9
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
9 - 141
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
1900 MHz Application Circuit
This circuit was used to specify the performance for 1710-1990 MHz operation. Contact the HMC
Applications Group for assistance in optimizing performance for your application.
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 142
Note: C2 should be placed as close to pins as possible.
Recommended Component Values
TL1
TL2
50 Ohm
50 Ohm
Physical Length
0.04”
0.10”
C2
2 pF
Electrical Length
4°
11°
C3
3.3 pF
C4
15 pF
Impedance
PCB Material: 10 mil Rogers 4350, Er = 3.48
C1
3 pF
C5
100 pF
C6
2.2 μF
L1
10 nH
L2
12 nH
R1
5.1 Ohm
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
1900 MHz Evaluation PCB
List of Materials for Evaluation PCB 108712-1900 [1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
2 mm DC Header
C1
3 pF Capacitor, 0402 Pkg.
C2
2 pF Capacitor, 0402 Pkg.
C3
3.3 pF Capacitor, 0402 Pkg.
C4
15 pF Capacitor, 0402 Pkg.
C5
100 pF Capacitor, 0402 Pkg.
C6
2.2 μF Capacitor, Tantalum
L1
10 nH Inductor, 0402 Pkg.
L2
12 nH Inductor, 0402 Pkg.
R1
5.1 Ohm Resistor, 0402 Pkg.
U1
HMC452ST89 / HMC452ST89E
Linear Amp
PCB [2]
108710 Evaluation PCB, 10 mils
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
AMPLIFIERS - LINEAR & POWER - SMT
9
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
9 - 143
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
2100 MHz Application Circuit
This circuit was used to specify the performance for 2010-2170 MHz operation. Contact the HMC
Applications Group for assistance in optimizing performance for your application.
AMPLIFIERS - LINEAR & POWER - SMT
9
9 - 144
TL1
TL2
50 Ohm
50 Ohm
C1
Physical Length
0.04”
0.04”
C2
2 pF
Electrical Length
5°
5°
C3
3.3 pF
Impedance
PCB Material: 10 mil Rogers 4350, Er = 3.48
Recommended Component Values
3 pF
C4
15 pF
C5
100 pF
C6
2.2 μF
L1
12 nH
L2
10 nH
R1
5.1 Ohm
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC452ST89 / 452ST89E
v02.0710
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
2100 MHz Evaluation PCB
List of Materials for Evaluation PCB 109824-2100 [1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
2 mm DC Header
C1
3 pF Capacitor, 0402 Pkg.
C2
2 pF Capacitor, 0402 Pkg.
C3
3.3 pF Capacitor, 0402 Pkg.
C4
15 pF Capacitor, 0402 Pkg.
C5
100 pF Capacitor, 0402 Pkg.
C6
2.2 μF Capacitor, Tantalum
L1
12 nH Inductor, 0402 Pkg.
L2
10 nH Inductor, 0402 Pkg.
R1
5.1 Ohm Resistor, 0402 Pkg.
U1
HMC452ST89 / HMC452ST89E
Linear Amp
PCB [2]
109822 Evaluation PCB, 10 mils
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
AMPLIFIERS - LINEAR & POWER - SMT
9
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
9 - 145
Similar pages