ETC FKC05-12S05 5 watt dc dc converter Datasheet

• 5 WATTS OUTPUT POWER
• 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE
• INTERNATIONAL SAFETY STANDARD APPROVAL
• FIVE-SIDED SHIELD
• HIGH EFFICIENCY UP TO 84%
• STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE
• FIXED SWITCHING FREQUENCY
The FKC05 series offer 5 watts of output power from a package in an IC compatible
24pin DIP configuration without derating to 71ºC ambient temperature and pin to pin
compatible with FKC03 series. FKC05 series have 2:1 wide input voltage of 9-18,
18-36 and 36-75VDC. FKC05-W series have 4:1 ultra wide input voltage of 9-36 and
18-75VDC. The FKC05 features 1600VDC of isolation, short-circuit protection and as
well as five sided shielding. All models are particularly suited to telecommunications,
industrial, mobile telecom and test equipment applications.
UL E193009
TUV R3-50007936
CB JPTUV-003641
CE MARK
T E C H N I C A L S P E C I F I C AT I O N
All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Output power
5 Watts max
Voltage accuracy
Full load and nominal Vin
Minimum load (Note 1)
10% of FL
Line regulation
LL to HL at Full Load
Load regulation
25% to 100% FL
Single
Dual
20MHz bandwidth
Short circuit protection
Switching frequency
300KHz, typ
± 5%
170% typ
Continuous, automatics recovery
Input voltage range
9 – 18VDC
18 – 36VDC
36 – 75VDC
9 – 36VDC
18 – 75VDC
Input filter
IEC60950, UL1950, EN60950
Case material
Nickel-coated copper
Base material
Non-conductive black plastic
Potting material
Epoxy (UL94-V0)
Input reflected ripple (Note 2)
Start up time
Nominal Vin and full load
Nominal Vin and constant resistor load
DIP
SMD
6
MTBF (Note 3)
3.165 x 10 hrs
ENVIRONMENTAL SPECIFICATIONS
Operating temperature range
36VDC
50VDC
100VDC
Maximum case temperature
20mAp-p
Thermal impedance
600mS typ
FKC05-48S05 Derating Curve
Standard
-25ºC~+85ºC (with derating)
M1 (Note 4)
-40ºC~+85ºC (non-derating)
M2 (W series) -40ºC~+85ºC (with derating)
+100ºC
Storage temperature range
-55ºC ~ +105ºC
Nature convection
Thermal shock
Vibration
M1 Version
1.25 X 0.80 X 0.40 Inch
(31.8 X 20.3 X 10.2 mm)
16g (0.55oz)
18g (0.62oz)
Dimensions
Pi type
12V input
24V input
48V input
Input surge voltage
100mS max
20ºC/watt
MIL-STD-810D
10~55Hz, 10G, 30minitues along X,Y and Z
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
100
75
50
25
M! Version
OUTPUT POWER (%)
10 ohms, min
Approvals and standard
Weight
INPUT SPECIFICATIONS
12V nominal input
24V nominal input
48V nominal input
FKC05-W 24V nominal input
48V nominal input
9
300pF, max
200uS
FKC05
DIP
SMD
Isolation capacitance
50mVp-p
% of FL at nominal input
Input ( Output ) to Case
± 0.5%
± 1%
Transient response recovery time 25% load step change
Over load protection
Input to Output
Isolation resistance
± 0 .02% / ºC, max
Temperature coefficient
Isolation voltage
See table
1600VDC, min
1600VDC, min
1000VDC, min
± 0.2%
Cross regulation(Dual) Asymmetrical load 25% / 100% FL
Ripple and noise
Efficiency
± 2%
Nature convection
0
-40 -25 -10 0
Conducted emissions
EN55022
Class A
Radiated emissions
EN55022
Class A
ESD
EN61000-4-2
Perf. Criteria2
Radiated immunity
EN61000-4-3
Perf. Criteria2
Fast transient
EN61000-4-4
Perf. Criteria2
50 60 70 80 90 100
AMBIENT TEMPERATURE (ºC)
Surge
EN61000-4-5
Perf. Criteria2
Conducted immunity
EN61000-4-6
Perf. Criteria2
Model
Number
Input
Range
Output
Voltage
Output
Current
Input
Current (5)
Eff (6)
(%)
Capacitor(7)
Load max
FKC05-12S33
FKC05-12S05
FKC05-12S12
FKC05-12S15
FKC05-12D05
FKC05-12D12
FKC05-12D15
FKC05-24S33 (W)
FKC05-24S05 (W)
FKC05-24S12 (W)
FKC05-24S15 (W)
FKC05-24D05 (W)
FKC05-24D12 (W)
FKC05-24D15 (W)
FKC05-48S33 (W)
FKC05-48S05 (W)
FKC05-48S12 (W)
FKC05-48S15 (W)
FKC05-48D05 (W)
FKC05-48D12 (W)
FKC05-48D15 (W)
9 – 18 VDC
9 – 18 VDC
9 – 18 VDC
9 – 18 VDC
9 – 18 VDC
9 – 18 VDC
9 – 18 VDC
18 – 36 (9 – 36) VDC
18 – 36 (9 – 36) VDC
18 – 36 (9 – 36) VDC
18 – 36 (9 – 36) VDC
18 – 36 (9 – 36) VDC
18 – 36 (9 – 36) VDC
18 – 36 (9 – 36) VDC
36 – 75 (18 – 75) VDC
36 – 75 (18 – 75) VDC
36 – 75 (18 – 75) VDC
36 – 75 (18 – 75) VDC
36 – 75 (18 – 75) VDC
36 – 75 (18 – 75) VDC
36 – 75 (18 – 75) VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
1000mA
1000mA
470mA
400mA
± 500mA
± 230mA
± 190mA
1000mA
1000mA
470mA
400mA
± 500mA
± 230mA
± 190mA
1000mA
1000mA
470mA
400mA
± 500mA
± 230mA
± 190mA
382mA
563mA
603mA
649mA
563mA
597mA
594mA
194mA (191mA)
285mA (278mA)
305mA (309mA)
325mA (312mA)
274mA (282mA)
288mA (295mA)
308mA (297mA)
98mA (100mA)
143mA (138mA)
151mA (155mA)
162mA (160mA)
141mA (145mA)
147mA (151mA)
154mA (159mA)
76
78
82
81
78
81
84
75 (76)
77 (79)
81 (80)
81 (84)
80 (78)
84 (82)
81 (84)
74 (73)
77 (79)
82 (80)
81 (82)
78 (76)
82 (80)
81 (79)
2200uF
1000uF
220uF
150uF
± 680uF
± 100uF
± 68uF
2200uF
1000uF
220uF
150uF
± 680uF
± 100uF
± 68uF
2200uF
1000uF
220uF
150uF
± 680uF
± 100uF
± 68uF
Note
Pin size is 0.02(0.5) Dia or
0.01 x 0.02 (0.25 x 0.50) Rectangular Pin
1.00(25.4)
20
0.15
(3.8)
Pin Area
0.04 x 0.02
(1.0 x 0.5)
0.40
(10.2)
5
16
9
13
12
0.80(20.3)
1. All dimensions in Inches (mm)
2. Pin pitch tolerance ± 0.014(0.35)
0.80(20.3)
SMD PIN CONNECTION
DIP PIN CONNECTION
PIN
SINGLE
DUAL
PIN
SINGLE
DUAL
2
3
- INPUT
- INPUT
- INPUT
- INPUT
23
22
+ INPUT
+ INPUT
+ INPUT
+ INPUT
9
10
11
BOTTOM
VIEW
9
10
11
0.60(15.2)
1
0.43(10.9)
1.26 (32.0)
16
15
14
24
0.44(11.2)
0.25 (6.35)
BOTTOM
VIEW
0.02(0.5)
2
3
0.70 (17.8)
23
22
0.15 (3.81)
0.92(23.4)
0.18(4.6)
0.10 (2.54)
Suffix-SMD
0.20 (5.1)
2.
3.
4.
5.
6.
7.
8.
The FKC05 (W) series required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage
these devices, however they may not meet all listed specification.
Simulated source impedance of 12uH. 12uH inductor on series with + Vin.
BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment)
M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard and M2 version
Maximum value at nominal input voltage and full load of standard type.
Typical value at nominal input voltage and full load
Test by minimum Vin and constant resistor load.
There is no pin at PIN10 & PIN15 for FKC05-W series
1.25 (31.8)
1.
NC
COMMON
NC(Note 8) NC(Note 8)
NC
- OUTPUT
16
15
14
- OUTPUT COMMON
NC(Note 8) NC(Note 8)
+ OUTPUT + OUTPUT
PIN
SINGLE
DUAL
PIN
SINGLE
DUAL
2
3
- INPUT
- INPUT
- INPUT
- INPUT
23
22
+ INPUT
+ INPUT
+ INPUT
+ INPUT
9
10
11
Others
NC
NC
NC
NC
16
- OUTPUT COMMON
COMMON
NC
15
NC
NC
- OUTPUT
14
+ OUTPUT + OUTPUT
NC
Others
NC
NC
Similar pages