Micro-D Plastic Micro-D Plastic Shell Uninsulated Wire Pigtails Solder-Dipped or Gold Plated Wire – These connectors feature TwistPin contacts and mil spec crimp termination to solid copper wire. High temperature liquid crystal polymer (LCP) housings are 30% glassfilled. A B Choose Gold Plated or Solder Dipped Wire in #24 AWG (.020 inch diameter), #25 AWG (.018 inch diameter) or #26 AWG (.016 inch diameter. C MWD Plastic Micro-D’s are non-environmental and are smaller and lighter weight than metal shell versions. D E F G how to order mwd plastic uninsulated wire pigtails Series MWDL MWD Series (“L” designates LCP thermoplastic housing) Contact Layout Contact Type P – Pin S – Socket 9 15 21 25 31 37 51 Wire Gage (AWG) Wire Type 4 – #24 5 – #25 6 – #26 Wire Length Inches Wire Finish C 3 Single Strand Copper Solder Dipped (63/37 SnPb) K .125 .250 .375 .500 .750 1.000 2.000 B P M M1 S S1 – .250 B 4 Gold-Plated Wire Length In Inches. “.500” Specifies Half Inch. H J Hardware Sample Part Number MWDL – 31 P – 5 C 4 MICRO-D MOUNTING HARDWARE B P M M1 S S1 Thru-Hole Jackpost Jackscrew Jackscrew Jackscrew Jackscrew L M N Order Hardware Separately Removable Includes Nut and Washer Hex Head Removable E-ring Hex Head Removable E-ring Extended Slot Head Removable E-ring Slot Head Removable E-ring Extended P © 2006 Glenair, Inc. GLENAIR, INC. www.glenair.com CAGE Code 06324/0CA77 Printed in U.S.A. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 K-6 E-Mail: [email protected] Micro-D Plastic Shell Uninsulated Wire Pigtails PERFORMANCE SPECIFICATIONS Current Rating DWV Insulation Resistance Contact Resistance Operating Temperature Shock, Vibration Mating Force MATERIALS AND FINISHES Connector Shell Insulator Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant 3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts) Liquid Crystal Polymer (LCP) Liquid Crystal Polymer (LCP) Flourosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215 A B C LENGTH + 0.2/-0.0 (+5.08/-0.0) D H D SOCKET CONNECTOR .096/.088 (2.43/2.23) DIA. LENGTH + 0.2/-0.0 (+5.08/-0.0) .100/.088 (2.54/2.24) H J PIN CONNECTOR E F G MICRO-D PLASTIC SHELL UNINSULATED WIRE PIGTAIL DIMENSIONS A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S B C Max. In . mm. In. mm. ± .003 ± 0.08 .785 .785 .935 .935 1.080 1.080 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 19.94 19.94 23.75 23.75 27.43 27.43 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 .565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 © 2006 Glenair, Inc. GLENAIR, INC. www.glenair.com In. mm. .292 .380 .442 .530 .592 .680 .692 .780 .842 .930 .992 1.080 .942 1.030 7.42 9.65 11.23 13.46 15.04 17.27 17.58 19.81 21.39 23.62 25.20 27.43 23.93 26.16 D Max. In. .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .260 .260 mm. 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60 E Max. In. .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 mm. 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 CAGE Code 06324/0CA77 F Max. G Max. H Max. In. mm. In. mm. In. .395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 .408 .408 .558 .558 .708 .708 .808 .808 .958 .958 1.108 1.108 1.058 1.058 10.36 10.36 14.17 14.17 17.98 17.98 20.52 20.52 24.33 24.33 28.14 28.14 26.87 26.87 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .220 .220 J Max. mm. In. 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 5.59 5.59 mm. .139 3.53 .139 3.53 .139 3.53 .139 3.53 .139 3.53 .139 3.53 .182 4.62 Printed in U.S.A. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 K-7 E-Mail: [email protected] K