BYM07-50 THRU BYM07-400 EGL34A THRU EGL34G SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST EFFICIENT RECTIFIER * Reverse Voltage - 50 to 400 Volts D DO-213AA FEATURES E T N E P A T Forward Current - 0.5 Ampere SOLDERABLE ENDS 1st BAND 2nd BAND D1= 0.066 0.060 (1.676) (1.524) D2 0.022 (0.559) 0.016 (0.406) D2 = D1 + 0 - 0.008 (0.20) 0.145 (3.683) 0.131(3.327) ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ For surface mount applications ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed: 450°C/5 seconds at terminals. Complete device submersible temperature of 260°C for 10 seconds in solder bath 1st band denotes type and polarity 2cnd band denotes voltage type MECHANICAL DATA Dimensions in inches and (millimeters) *Glass-plastic encapsulation is covered by Patent No. 3,996,602 and brazed-lead assembly to Patent No. 3,930,306 ® Case: JEDEC DO-213AA molded plastic over glass body Terminals: Plated terminals, solderable per MIL-STD-750, Method 2026 Polarity: Two bands indicate cathode end -1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating Mounting Position: Any Weight: 0.0014 ounce, 0.036 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS Fast efficient device: 1st band is Green Polarity color bands (2nd Band) BYM07 -50 BYM07 -100 BYM07 -150 BYM07 -200 BYM07 -300 BYM07 -400 EGL34A EGL34B EGL34C EGL34D EGL34F EGL34G BROWN YELLOW UNITS GRAY RED PINK ORANGE Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 Volts Maximum RMS voltage VRMS 35 70 105 140 210 280 Volts Maximum DC blocking voltage VDC 50 100 150 200 300 400 Volts Maximum average forward rectified current at TT=75°C I(AV) 0.5 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 10.0 Amps VF 1.25 IR 5.0 50.0 µA IR(AV) 50.0 µA Maximum instantaneous forward voltage at 0.5A TA=25°C TA=125°C Maximum DC reverse current at rated DC blocking voltage Maximum full load reverse current, full cycle average at TA=55°C 1.35 Volts Maximum reverse recovery time (NOTE 1) trr 50.0 ns Typical junction capacitance (NOTE 2) CJ 7.0 pF Maximum thermal resistance (NOTE 3) RΘJA RΘJT 150.0 70.0 °C/W TJ, TSTG -65 to +175 °C (NOTE 4) Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal (4) Thermal resistance from junction to terminal, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal 4/98 RATINGS AND CHARACTERISTIC CURVES BYM07-50 THRU BYM07-400 / EGL34A THRU EGL34G FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE 12 PEAK FORWARD SURGE CURRENT, AMPERES 0.5 RESISTIVE OR INDUCTIVE LOAD 0.4 0.3 0.2 0.1 0 0 25 50 75 100 125 150 175 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 10 8.0 6.0 4.0 2.0 0 10 1 100 NUMBER OF CYCLES AT 60 HZ TERMINAL TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 100 50 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES PULSE WIDTH=300µs 1% DUTY CYCLE TJ=150°C TJ=25°C 1 0.1 EGL34A - EGL34D EGL34F & EGL34G 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 10 TJ=150°C 1 TJ=125°C 0.1 TJ=75°C 0.01 TJ=25°C 2.0 0.001 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 30 TRANSIENT THERMAL IMPEDANCE, °C/W JUNCTION CAPACITANCE, pF 35 25 20 15 10 5 0 0.1 1 10 REVERSE VOLTAGE, VOLTS 100 10 1 0.1 0.01 0.1 1 t, PULSE DURATION, sec. 10 100